...
Блок кода |
---|
* Конфигурация туннеля* ESR2# sh tunnels configuration gre 1 State: Enabled Description: -- Mode: ip Bridge group: -- VRF: -- Local address: 192.0.2.2 Remote address: 192.0.2.1 Calculates checksums for outgoing GRE packets: No Requires that all input GRE packets were checksum: No key: 60 TTL: 64 DSCP: Inherit MTU: 1472 Path MTU discovery: Enabled Don't fragment bit suppression: Disabled Security zone: -- Multipoint mode: Disabled Keepalive: State: Disabled Timeout: 10 Retries: 6 Destination address: -- *Статус Сервисаcервиса и выделенные метки* sh mpls l2vpn p2p P2P: EoMPLS gigabitethernet 1/0/2: MTU: 1500 Status: Up PW ID 100, Neighbor 10.100.0.1: MTU: 1500 Status TLV: Enable Last change: 00:14:27 Status: Up ESR2# sh mpls forwarding-table Local Outgoing Prefix Outgoing Next Hop label label or tunnel ID Interface -------- -------- ------------------------------------------- ---------------- --------------------------------------- 17 imp-null 10.100.0.1/32 gre 1 10.0.0.1 16 16 PW ID 100 -- 10.100.0.1 *Доступность*CE1# ping 10.100.0.2 detailed PING 10.100.0.2 (10.100.0.2) 56 bytes of data. 64 bytes from 10.100.0.2: icmp_seq=1 ttl=0 time=1.38 ms 64 bytes from 10.100.0.2: icmp_seq=2 ttl=0 time=1.22 ms 64 bytes from 10.100.0.2: icmp_seq=3 ttl=0 time=1.33 ms 64 bytes from 10.100.0.2: icmp_seq=4 ttl=0 time=1.26 ms 64 bytes from 10.100.0.2: icmp_seq=5 ttl=0 time=1.17 ms |
...