...
№ | Front panel element | Description |
---|---|---|
1 | 110-250 V АC 50–60 Hz | Power source. |
2 | Power | Device power LED. |
Status | Current device status LED. | |
Alarm | Alarm LED. | |
UserИндикатор, использущийся для пользовательских сценариев, которые можно назначить в режиме конфигурирования устройства | LED used for custom scripts that can be assigned in the device configuration mode. | |
3 | Console | Console port RS-232 (RJ-45) for local management of the device. |
4 | F | Functional key that reboots the device and resets it to factory default configuration:
|
5 | USB | Разъем USB 2.0 для подключения внешних USB-устройствport for USB devices connection. |
6 | [1 .. 4] | 4 ports of Ethernet 10/100/1000BASE-T. |
7 | [5-6] | 2 ports of 1000BASE-X SFP. |
8 | HDD | Connector for HDD installation. |
...
№ | Front panel element | Description |
---|---|---|
1 | 110-250 V АC 50–60 Hz | Power source. |
2 | Power | Device power LED. |
Status | Current device status LED. | |
Alarm | Alarm LED. | |
UserИндикатор, использущийся для пользовательских сценариев, которые можно назначить в режиме конфигурирования устройства | LED used for custom scripts that can be assigned in the device configuration mode. | |
3 | F | Functional key that reboots the device and resets it to factory default configuration:
|
4 | Console | Console port RS-232 (RJ-45) for local management of the device. |
5 | microSD | microSD-card port. |
6 | USB1 | USB 2.0 port for USB devices connection. |
7 | USB2 | USB 3.0 port for USB devices connection. |
8 | [1 .. 4] | 4 ports of Ethernet 10/100/1000BASE-T. |
9 | XG1, XG2 | 2 ports of 10GBASE-R (SFP+)1000BASE-X. |
10 | HDD | Connector for HDD installation. |
...
№ | Front panel element | Description |
---|---|---|
1 | Status | Current device status LED. |
Alarm | Alarm LED. | |
UserИндикатор, использущийся для пользовательских сценариев, которые можно назначить в режиме конфигурирования устройства | LED used for custom scripts that can be assigned in the device configuration mode. | |
Flash | Activity of exchange with data storage – microSD card or USB Flash. | |
Power | Device power LED. | |
Master | Failover mode operation LED (is not supported in the current version). | |
Fan | Fan operation LED. | |
RPS | Redundant power supply LED. | |
2 | F | Functional key that reboots the device and resets it to factory default configuration:
|
3 | OOB | Ethernet -порт используется только для обновления программного обеспечения через загрузчик port only used for software updates via the U-Boot . Данный порт не используется для удаленного доступа и управленияboot loader. This port is not used for remote access and control. |
Console | Console port RS-232 (RJ-45) for local management of the device. | |
4 | microSD | microSD-card port. |
5 | USB | USB 2.0 port for USB devices connection. |
6 | [1 .. 12] | Slots for 25G SFP28/10G SFP+/1G SFP transceivers. |
7 | HDD | Connector for HDD installation. |
...
Figure 13 – ESR-3200 front panel
Table 9 15 lists connectors, LEDs and controls located on the front panel of ESR-3100.
Table 9 15 – Description of connectors, LEDs and controls located on ESR-3100 front panel
...
Figure 14 – ESR-3200 rear panel
Table 10 16 lists rear panel connectors of the router.
Table 10 16 – Rear panel connectors description
...
Figure 17 – ESR-3100 front panel
Table 11 17 lists connectors, LEDs and controls located on the front panel of ESR-3100.
Table 11 17 – Description of connectors, LEDs and controls located on ESR-3100 front panel
...
Figure 18 – ESR-3100 rear panel
Table 12 18 lists rear panel connectors of the router.
Scroll Pagebreak |
---|
Table 12 18 – Rear panel connectors description
...
Figure 21 – ESR-1700 front panel
Table 13 19 lists connectors, LEDs and controls located on the front panel of ESR-1700.
Table 13 19 – Description of ESR-1700 connectors, LEDs and front panel controls
...
Figure 22 – ESR-1700 rear panel
Table 14 20 lists rear panel connectors of the router.
Table 14 20 – Rear panel connectors description
...
Figure 25 – ESR-1511 front panel
Table 15 21 lists connectors, LEDs and controls located on the front panel of ESR-1511.
Table 15 21 – Description of connectors, LEDs and controls located on ESR-1511 front panel
...
Figure 26 – ESR-1500 front panel
Table 16 22 lists connectors, LEDs and controls located on the front panel of ESR-1500.
Table 16 22 – Description of ESR-1500 connectors, LEDs and front panel controls
...
Figure 27 – ESR-1511, ESR-1500 rear panel
Table 17 23 lists rear panel connectors of the router.
Table 17 23 – Rear panel connectors description
...
Figure 30 – ESR-1200 front panel
Table 18 24 lists connectors, LEDs and controls located on the front panel of ESR-1200.
Table 18 24 – Description of connectors, LEDs and controls located on the front panel of ESR-1200
...
Figure 31 – ESR-1000 front panel
Table 19 25 lists sizes, LEDs and controls located on ESR-1000 front panel.
Table 19 25 – Description of connectors, LEDs and controls located on ESR-1000 front panel
...
Figure 32 – ESR-1000 rear panel
Table 20 26 lists rear panel connectors of the router.
Scroll Pagebreak |
---|
Table 20 26 – Rear panel connectors description
...
Figure 36 – ESR-100 front panel
Table 21 27 lists connectors, LEDs and controls located on the front panel of ESR-100 and ESR-200 routers.
Table 21 27 – Description of connectors, LEDs and controls located on ESR-200, ESR-100 front panel
...
Figure 37 – ESR-200, ESR-100 rear panel
Table 22 28 lists rear panel connectors of the router.
Table 22 28 – Rear panel connectors description
...
Figure 40 – ESR-21 front panel
Table 23 29 lists sizes, LEDs and controls located on ESR-21 front panel.
Table 23 29 – Description of connectors, LEDs and controls located on ESR-21 front panel
...
Figure 41 – ESR-21 rear panel
Table 24 30 lists rear panel connectors of the router.
Table 24 30 – Rear panel connectors description
...
Figure 44 – ESR-20 front panel
Table 25 31 lists connectors, LEDs and controls located on the front panel of ESR-30.
Table 25 31 – Description of connectors, LEDs and controls located on ESR-30 front panel
...
Figure 45 – ESR-20 front panel
Table 26 32 lists connectors, LEDs and controls located on the front panel of ESR-20.
Table 26 32 – Description of connectors, LEDs and controls located on ESR-20 front panel
...
Figure 46 – ESR-20, ESR-30 rear panel
Table 27 33 lists rear panel connectors of the routers.
Table 27 33 – Rear panel connectors description
...
Figure 49 – ESR-15 front panel
Table 28 34 lists connectors, LEDs and controls located on the front panel of ESR-15 router.
Table 28 34 – Description of connectors, LEDs and controls located on ESR-15 front panel
...
Figure 50 – ESR-15 top panel
Table 29 35 lists LEDs located on ESR-15 top panel.
Table 29 35 – Description of front panel LEDs
...
Figure 51 – ESR-14VF, ESR-12VF front panel
Table 30 36 lists connectors, LEDs and controls located on the front panel of ESR-14VF and ESR-12VF routers.
Table 30 36 – Description of connectors, LEDs and controls located on ESR-14VF, ESR-12VF front panel
...
Figure 52 – ESR-12VF, ESR-14VF rear panel
Table 31 37 lists rear panel connectors of the router.
Table 31 37 – Rear panel connectors description
...
Figure 55 – ESR-12V front panel
Table 32 38 lists connectors, LEDs and controls located on the front panel of ESR-12VF router.
Scroll Pagebreak |
---|
Table 32 38 – Description of connectors, LEDs and controls located on ESR-12V front panel
...
Figure 56 – ESR-12V rear panel
Table 33 39 lists rear panel connectors of the router.
Scroll Pagebreak |
---|
Table 33 39 – Rear panel connectors description
...
Figure 59 – ESR-10 rear panel
Table 34 40 lists connectors, LEDs and controls located on the rear panel of ESR-10.
Scroll Pagebreak |
---|
Table 34 40 – Description of connectors, LEDs and controls located on ESR-10 rear panel
...
Figure 60 – ESR-10 side panel
Table 35 41 lists right panel controls of the router.
Table 35 41 – Right panel connectors description
...
Figure 61 – ESR-10 top panel
Table 36 42 lists LEDs located on ESR-10 top panel.
Table 36 42 – Description of front panel LEDs
...
Gigabit Ethernet copper interface statuses are represented by two LEDs – green LINK/ACT LED and amber SPEED LED. Location of the copper interface LEDs is depicted in figure 5062. SFP interface status is represented by two LEDs – RX/ACT and TX/ACT – depicted in figure 5163. For light indication meaning, see Tables 37 43 and 38 44 respectively.
Якорь | ||||
---|---|---|---|---|
|
...
Figure 63 – Location of optical interface indicators
Scroll Pagebreak |
---|
Table 37 43 – Light indication of copper interface status
SPEED indicator is lit | LINK/ACT indicator is lit | Ethernet interface state |
---|---|---|
Off | Off | The port is disabled or connection is not established. |
Off | Solid on | 10Mbps or 100Mbps connection is established. |
Solid on | Solid on | 1000Mbps connection is established. |
X | Flashes | Data transfer is in progress. |
Table 38 44 – Light indication of SFP/SFP+/QSFP+ interface status
...
The following table lists description of system indicator statuses and meanings.
Table 39 45 – Status of system indicators
Indicator name | Indicator function | LED State | Device State |
---|---|---|---|
Status | Current device status LED. | Green | Device is in normal operation state. |
Red | The device is in the firmware download state. | ||
Alarm | Alarm LED. | - | - |
VPN | Active VPN sessions indicator. | - | - |
Flash | Activity indicator of exchange with data storages: SD-card or USB Flash. | Green | Read/write operation execution with 'copy' command. |
Power | Device power LED. | Green | Device power is normal. Main power supply, if installed, is operational. |
Orange | Main power supply failure, fault, or the primary network is missing. | ||
Off | Device internal power supply failure. | ||
Master | Indicator of failover modes operation. | - | - |
Fan | Cooling fan status. | Off | All fans are operational. |
Red | One or more fans has failed. Possible cause of failure: at least one of the fans has stopped or is working at lower rpm. | ||
RPS | Backup power supply operation mode. | Green | Backup power supply is installed and operational. |
Off | Backup power supply is not installed. | ||
Red | Backup power supply is missing or failed. |
WLC-3200, ESR-3200, ESR-3100, ESR-1511, ESR-1500 light indication
Gigabit Ethernet copper interface and SFP interface statuses are represented by two LEDs – green LINK/ACT LED and amber SPEED LED. Location of the copper interface LEDs is depicted in figure 64. SFP interface status is depicted in figure 65. For light indication meaning, see Tables 40 46 and 41 47 respectively.
Figure 64 – Location of RJ-45 connector indicators
...
Figure 65 – Location of optical interface indicators
Table 40 46 – Light indication of copper interfaces status
SPEED indicator is lit | LINK/ACT indicator is lit | Ethernet interface state |
---|---|---|
Off | Off | The port is disabled or connection is not established. |
Off | Solid on | 10 Mbps or 100 Mbps connection is established. |
Solid on | Solid on | 1000 Mbps connection is established. |
X | Flashes | Data transfer is in progress. |
Table 41 47 – Light indication of SFP/SFP+/QSFP+ status
...
The following table describes the states of the system LEDs on the device and their meanings.
Table 42 48 – Status of system indicators
...
Gigabit Ethernet copper interface and SFP interface statuses are represented by two LEDs – green LINK/ACT LED and amber SPEED LED. Location of the copper interface LEDs is depicted in figure 5062. SFP interface status is depicted in figure 54figure66. For light indication meaning, see Table 4349.
Figure 66 – Location of optical interface indicators
Table 43 49 – Light indication of copper and SFP interfaces status
...
The following table describes the states of the system LEDs on the device and their meanings.
Table 44 50 – Status of system indicators
...
Gigabit Ethernet copper interface statuses are represented by two LEDs – green LINK/ACT LED and amber SPEED LED.
Table 45 51 – Light indication of copper and SFP interfaces status
...
The following table lists description of system indicator statuses and meanings.
Table 46 52 – Status of system indicators
Indicator name | Indicator function | LED State | Device State |
---|---|---|---|
Power | Device power LED. | Green | Device power is normal operation state. Main power supply, if installed, is operational. The main software is uploaded. |
Red | The main software is not loaded. | ||
Off | Device internal power supply failure. | ||
Status | Current device status LED. | Green | Device is in normal operation state. |
Orange | Device is booting up the software. | ||
Alarm | Alarm LED. | - | - |
HA | HA operation mode LED (not supported in the current version) | - | - |
Scroll Pagebreak |
---|
WLC-30 and ESR-30 light indication
Gigabit Ethernet copper interface statuses are represented by two LEDs – green LINK/ACT LED and amber SPEED LED.
Table 47 53 – Light indication of copper and SFP interfaces status
...
The following table lists description of system indicator statuses and meanings.
Table 48 54 – Status of system indicators
...
Gigabit Ethernet copper interfaces statuses are represented by amber SPEED LED.
Table 49 55 – Light indication of copper interface status
...
The following table lists description of system indicator statuses and meanings.
Table 50 56 – Status of system indicators
Indicator name | Indicator function | LED State | Device State |
---|---|---|---|
Power | Device power LED. | Green | Device power is normal operation state. Main power supply, if installed, is operational. The main software is uploaded. |
Red | The main software is not loaded. | ||
Off | Device internal power supply failure. | ||
USB1, USB2 | Indicators of operation of external USB devices. | Green | USB device is connected. |
Flashes green | Read/write operation execution. | ||
Off | No devices connected or connectivity issues. |
WLC-15 light indication
Gigabit Ethernet copper interface statuses are represented by two LEDs – green LINK/ACT LED and amber SPEED LED.
Table 57 – Light indication of copper and SFP interface status
SPEED indicator is lit | LINK/ACT indicator is lit | Ethernet interface state |
---|---|---|
Off | Off | Port is disabled or connection is not established |
Off | Solid on | 10 Mbps or 100 Mbps connection is established |
Solid on | Solid on | 1000 Mbps connection is established |
X | Flashes | Data transfer is in progress |
Figure 71 – Location of SFP connector indicators
Figure 72 – Location of RJ-45 connector indicators
The following table lists description of system indicator statuses and meanings.
Table 58 – Status of system indicators
Indicator name | Indicator function | LED State | Device State |
---|---|---|---|
Power | Device power LED. | Green | Device power is normal operation state. Main power supply, if installed, is operational. The main software is uploaded. |
Red | The main software is not loaded. | ||
Off | Device internal power supply failure. | ||
Status | Current device status LED. | Green | Device is in normal operation state. |
Red | Device is booting up the software. | ||
Alarm | Alarm LED. | - | - |
User | Used for custom scripts that can be assigned in the device configuration mode | - | - |
ESR-12V(F) light indication
Gigabit Ethernet copper interface statuses are represented by two LEDs – green LINK/ACT LED and amber SPEED LED.
Table 51 59 – Light indication of copper and SFP interface status
SPEED indicator is lit | LINK/ACT indicator is lit | Ethernet interface state |
---|---|---|
Off | Off | Port is disabled or connection is not established |
Off | Solid on | 10 Mbps or 100 Mbps connection is established |
Solid on | Solid on | 1000 Mbps connection is established |
X | Flashes | Data transfer is in progress |
Figure 71 73 – Location of SFP connector indicators (only for ESR-12VF, ESR-14VF)
Figure 72 74 – Location of RJ-45 connector indicators
The following table lists description of system indicator statuses and meanings.
Table 52 60 – Status of system indicators
...
Gigabit Ethernet copper interfaces statuses are represented by amber SPEED LED.
Table 53 61 – Light indication of copper interface status
SPEED indicator is lit | Ethernet interface state |
---|---|
Off | Port is disabled or connection is not established |
Solid amber on | 1000 Mbps connection is established |
Solid green on | 10 Mbps or 100 Mbps connection is established |
Flashes | Data transfer is in progress |
Table 54 62 – Status of system indicators
...
Scroll Pagebreak |
---|
Delivery package
WLC-15 standard delivery package includes:
- WLC-15 controller;
- Power cable;
- Console cable;
- 19” rack mounting kit;
- Documentation (optional);
- Technical passport.
WLC-30 standard delivery package includes:
- WLC-30 controller;
- Power cable;
- Console cable;
- 19” rack mounting kit;
- Documentation (optional);
- Technical passport.
WLC-3200 standard delivery package includes:
- WLC-3200 controller;
- Power cable;
- Console cable;
- 19” rack mounting kit;
- Documentation (optional);
- Technical passport.
ESR-10 standard delivery package includes:
- ESR-10 router;
- 220 VAC/12 VDC, 1.5 A power adapter;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
ESR-12V standard delivery package includes:
- ESR-12V router;
- Power cable;
- Console cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
ESR-12VF standard delivery package includes:
- ESR-12VF router;
- Power cable;
- Console cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
ESR-14VF standard delivery package includes:
- ESR-14VF router;
- Power cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
ESR-15 standard delivery package includes:
- ESR-15 router;
- 220 VAC/12 VDC, 1.5 A power adapter;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
ESR-20 standard delivery package includes:
- ESR-20 router;
- Power cable;
- Console cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
ESR-21 standard delivery package includes:
- ESR-21 router;
- Power cable;
- Console cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
Scroll Pagebreak |
---|
ESR-30 standard delivery package includes:
- ESR-21 router;
- Power cable;
- Console cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
ESR-100 standard delivery package includes:
- ESR-100 router;
- Power cable;
- Console cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
ESR-200 standard delivery package includes:
- ESR-200 router;
- Power cable;
- Console cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
ESR-1000 standard delivery package includes:
- ESR-1000 router;
- Console cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
ESR-1200 standard delivery package includes:
- ESR-1200 router;
- Console cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
ESR-1500 standard delivery package includes:
- ESR-1500 router;
- Console cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
ESR-1511 standard delivery package includes:
- ESR-1511 router;
- Console cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
Scroll Pagebreak |
---|
ESR-1700 standard delivery package includes:
- ESR-1700 router;
- Console cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
ESR-3100 standard delivery package includes:
- ESR-3100 router;
- Console cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
ESR-3200 standard delivery package includes:
- ESR-3200 router;
- Console cable;
- 19” rack mounting kit;
- Conformity certificate;
- Documentation (optional);
- Technical passport.
Примечание |
---|
Power module (PM-160-220/12 or PM-100-48/12) may be included in the ESR-1000, ESR-1200 delivery package on the customer's request. Power module (PM-160-220/12) may be included in the ESR-1500, ESR-1511, ESR-3100, ESR-3200, WLC-3200 delivery package on the customer's request. Power module (PM-350-220/12 or PM-350-48/12) may be included in the ESR-1700 delivery package on the customer's request. |
...