...

1. Interface language selection button (Russian and English versions of the web-interface are available) and exit button — to terminate the web-interface session under this user.
2. Main menu buttons — to group menus by categories.
3. Menu tabs and submenus — to manage the main information field.
4. Main information field — to view submenu data.
5. Information field — to display the software version installed on the controller.

   Scroll Pagebreak

Monitoring

Menu "Wireless" 

Якорь
беспроводные беспроводные

Submenu "AP Locations"

The "AP Locations" submenu displays a list of locations, the distribution of APs across them, and the number of APs that are managed by the Airtune service.

...

When moving to a location, the client table, optimization reports, access point sessions that are managed by Airtune service, optimization result and roaming statistics will be available.

Access Points

The page displays the APs that are registered and located in the selected location.

...

• AP Location – name of the location to which the access point belongs;
• Status Description – additional status information if problems are detected on the access point;
• Serial Number – serial number of the device as set by the factory;
• HW Version – hardware version of the device;
• First Activity at – time when the access point was first registered on controller;
• Connected at – time at which the access point was last connected to the controller;
• Last activity at – time at which the controller last configured the access point;
• Configured as – profile with which the access point was configured;
• Netconf Connection State – status of the connection between the access point and the controller using the Netconf protocol;
• Description – text description of the access point, which was assigned to it when forming the profile.

Clients

The page contains information about the total number of clients, as well as their quantitative distribution by frequency bands.

...

• IP-адрес – IP address of the connected device;
• Имя хоста – network name of the connected device;
• RSSI, дБм – received signal strength;
• SNR, дБ – signal-to-noise ratio;
• Канальная скорость передачи – modulation and channel rate when transmitting;
• Канальная скорость приема – modulation and channel rate at reception;
• Режим IEEE 802.11 – wireless network standard;
• Авторизован – client's authorization status;
• Домен – domain to which the user belongs;
• Качество соединения – parameter that displays the status of the link to the client, calculated based on the number of retransmitted packets sent to the client. The maximum value is 100% (all transmitted packets were sent on the first attempt), the minimum value is 0% (no packets were successfully sent to the client). The value of the parameter is calculated for the last 10 seconds;
• Общее качество соединения – parameter that displays the state of the link to the client, calculated based on the number of retransmitted packets sent to the client. The maximum value is 100% (all transmitted packets were sent on the first attempt), the minimum value is 0% (no packets were successfully sent to the client). The value of the parameter is calculated for the whole time of client connection;
• Скорость передачи, Кбит/c – actual speed of traffic transmission at the moment;
• Скорость приема, Кбит/c – actual rate of traffic reception at the moment;
• Передано, байт – number of bytes transmitted to the connected device;
• Принято, байт – number of bytes received from the connected device;
• Передано, пакетов – number of packets transmitted to the connected device;
• Принято, пакетов – number of packets received from the connected device;
• Время работы – time of connection with Wi-Fi client;
• Ширина полосы передачи, МГц – channel frequency bandwidth on which the radio interface operates during transmission;
• Ширина полосы приема, МГц – channel frequency bandwidth on which the radio interface operates during receiving. 

  Scroll Pagebreak

RRM Reports

The page displays optimization reports. By default, the last report is displayed. Select the required report date using the calendar. 

...

• MAC Address – MAC address of the AP that is managed by Airtune;
• IP Address – IP address of the access point that is managed by Airtune;
• Board Type – AP type that is managed by Airtune;
• Report Time – time at which the optimization report was generated;
• Power Before/After Optimization, dBm – AP power, the first number shows the value before optimization, the second value shows the power after optimization;
• Channel Before/After Optimization – access point radio interface channel, the first number shows the value before optimization, the second value shows the radio interface channel after optimization;
• Band, GHz – frequency range of the radio interface.

Airtune sessions

The page displays data about the access points that are currently under the control of the Airtune service.

...

• SSID – name of the network that is broadcast to users;
• Диапазон, ГГц – frequency range of the radio interface;
• MAC-адрес VAP – MAC address of the virtual access point;
• 802.11k – activity status of synchronization of lists of neighboring 802.11k access points, which allows the client, when the signal from the current access point weakens, to search for a more suitable access point from the recommended list, without analyzing the whole air;
• 802.11r – status of key negotiation activity between access points for 802.11r roaming, which allows to significantly accelerate the process of client switching between access points, because the client will not need to go through a second full authorization on the opposite access point, only accelerated.

RRM Statistics

The page displays the parameters of the access point radio interfaces after the last optimization.

...

• AP MAC – MAC address of the access point that is managed by Airtune;
• Band, GHz – frequency range of the radio interface;
• Status – status of the radio interface: Up – radio interface is activated, Down – radio interface is disabled;
• Locked DCA – status of dynamic channel allocation blocking: 0 – blocking disabled, 1 – blocking activated;
• locked TPC – automatic power control lock status: 0 – lock disabled, 1 – lock activated;
• Channel – number of the wireless channel on which the radio interface operates;
• Bandwidth, MHz – channel frequency bandwidth on which the radio interface operates;
• Power, dBm – signal power of the radio interface;
• Available Channels – list of channels from which a channel is selected and assigned to the radio interface after optimization;
• Associated Clients – number of clients connected to the radio interface.

Roaming Statistics

The page displays the entire list of virtual interfaces (SSIDs) that are processed by Airtune service. The page is designed to display the current state of 802.11 k/r roaming configuration on all location access points, as well as a list of all neighbors between which the service has configured roaming.

...

• AP MAC – MAC address of the access point;
• VAP MAC – MAC address of the virtual access point;
• Band, GHz – frequency range of the radio interface;
• 802.11k – activity status of synchronization of lists of neighboring 802.11k access points, which allows the client, when the signal from the current access point weakens, to search for a more suitable access point from the recommended list, without analyzing the entire air;
• 802.11r – key negotiation activity status between access points for 802.11r roaming, which allows a client to significantly speed up the process of switching between access points, as the client will not need to go through a second full authorization on the oncoming access point, only an accelerated one.
• FBT Links – 
• SSID – network name that is broadcast to users.

Submenu "Access Points"

The section contains lists of APs that can be registered and APs that have already been authorized on the controller.

...