...
| WLC model | HW version | Firmware | Secondary bootloader | Primary bootloader |
|---|---|---|---|---|
| WLC-15 | all | wlc15-1.30.4-build25.firmware | wlc15-1.30.4-build26.uboot | none |
| WLC-30 | all | wlc30-1.30.4-build25.firmware | wlc30-1.30.4-build26.uboot | none |
WLC-3200 | all | wlc3200-1.30.4-build24.firmware | wlc3200-1.30.4-build25.uboot | wlc3200-1.30.4-build25.bdk |
| ESR-15 | all | esr15-1.30.4-build25.firmware | esr15-1.30.4-build26.uboot | none |
| ESR-15R | all | esr15-1.30.4-build25.firmware | esr15-1.30.4-build26.uboot | none |
| ESR-30 | all | esr3x-1.30.4-build25.firmware | esr3x-1.30.4-build26.uboot | none |
ESR-3200 | all | esr3200-1.30.4-build25.firmware | esr3200-1.30.4-build26.uboot | esr3200-1.30.4-build26.bdk |
| vWLC | — | vwlc-1.30.4-build25.firmware | — | — |
...
| Предупреждение |
|---|
Before updating, use the show date command to verify that the correct date and time are set on the device. If an incorrect date is set on the controller, certificate validation will prevent the configuration changes from being applied after the update. |
Firmware version 1.30.2 0 is cumulative (it contains updated versions of the primary and secondary loaders), so it will be enough to:
- Make a backup copy of the configuration.
- Check that the date and time on the controller are correct.
- Download the firmware for the AP to the controller.
- Download the firmware for the WLC controller.
- Select fimware image version 1.30.2 0 for the next download.
| Предупреждение |
|---|
Turning off the power before the boot system {image-1|image-2} command is finished may cause the controller to malfunction. |
...