Сравнение версий

Старая версия 2

changes.mady.by.user Отдел Документации

Сохранено

по сравнению с

Новая версия 3

changes.mady.by.user Городской Илья Сергеевич

Сохранено

Ключ

  • Эта строка добавлена.
  • Эта строка удалена.
  • Изменено форматирование.

...

Примечание

Данные между юнитами кластера через канал синхронизации передаются в открытом виде. Также все вводимые команды конфигурирования, содержащие чувствительную информацию не в encrypted-виде, будут переданы в том же виде, в котором введены, после чего будут преобразованы в encrypted-вид.

Предупреждение

Для корректной работы точек при смене мастерства на версии 1.30.6, необходимо наличие  соответствующей версии прошивки для каждой из точек доступа на WLC.

При отсутствии прошивки на WLC, могут возникнуть проблемы при подключении точек в случае смены мастерства.

Пример настройки кластера

...

Раскрыть
Блок кода
cluster
  cluster-interface bridge 1
  unit 1
    mac-address e4:5a:d4:a0:be:35
  exit
  unit 2
    mac-address a8:f9:4b:af:35:84
  exit
  enable
exit

hostname wlc-1 
hostname wlc-1 unit 1
hostname wlc-2 unit 2

object-group service airtune
  port-range 8099
exit
object-group service dhcp_client
  port-range 68
exit
object-group service dhcp_server
  port-range 67
exit
object-group service dns
  port-range 53
exit
object-group service netconf
  port-range 830
exit
object-group service ntp
  port-range 123
exit
object-group service radius_auth
  port-range 1812
exit
object-group service sa
  port-range 8043-8044
exit
object-group service ssh
  port-range 22
exit
object-group service sync
  port-range 873
exit
object-group service journal_sync
  port-range 5432
exit

syslog max-files 3
syslog file-size 512
syslog file tmpsys:syslog/default
  severity info
exit

radius-server local
  nas ap
    key ascii-text password
    network 192.168.1.0/24
  exit
  nas local
    key ascii-text password
    network 127.0.0.1/32
  exit
  domain default
    user test
      password ascii-text password1
    exit
  exit
  virtual-server default
    enable
  exit
  enable
exit
radius-server host 127.0.0.1
  key ascii-text password
exit
aaa radius-profile default_radius
  radius-server host 127.0.0.1
exit

boot host auto-config
boot host auto-update

vlan 3
  force-up
exit
vlan 2449
  force-up
exit
vlan 2
exit

no spanning-tree

domain lookup enable

security zone trusted
exit
security zone untrusted
exit
security zone users
exit
security zone SYNC
exit

bridge 1
  vlan 1
  security-zone SYNC
  ip address 198.51.100.254/24 unit 1
  ip address 198.51.100.253/24 unit 2
  vrrp id 1
  vrrp ip 198.51.100.1/24
  vrrp group 1
  vrrp
  enable
exit
bridge 2
  vlan 2
  security-zone untrusted
  ip address dhcp
  no spanning-tree
  enable
exit
bridge 3
  vlan 3
  mtu 1458
  security-zone users
  ip address 192.168.2.1/24
  no spanning-tree
  enable
exit
bridge 5
  vlan 2449
  security-zone trusted
  ip address 192.168.1.3/24 unit 1
  ip address 192.168.1.2/24 unit 2
  vrrp id 2
  vrrp ip 192.168.1.1/32
  vrrp group 1
  vrrp
  no spanning-tree
  enable
exit
interface gigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 1/0/2
  description "Local"
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 1/0/4
  mode switchport
exit
interface tengigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 1/0/2
  mode switchport
exit
interface gigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 2/0/2
  description "Local"
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 2/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 2/0/4
  mode switchport
exit
interface tengigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 2/0/2
  mode switchport
exit

tunnel softgre 1
  mode data
  local address 192.168.1.1
  default-profile
  enable
exit

security zone-pair trusted self
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group ssh
    enable
  exit
  rule 20
    action permit
    match protocol icmp
    enable
  exit
  rule 30
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group ntp
    enable
  exit
  rule 50
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 60
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
  rule 70
    action permit
    match protocol tcp
    match destination-port object-group netconf
    enable
  exit
  rule 80
    action permit
    match protocol tcp
    match destination-port object-group sa
    enable
  exit
  rule 90
    action permit
    match protocol udp
    match destination-port object-group radius_auth
    enable
  exit
  rule 100
    action permit
    match protocol gre
    enable
  exit
  rule 110
    action permit
    match protocol tcp
    match destination-port object-group airtune
    enable
  exit
exit
security zone-pair trusted trusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair trusted untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair untrusted self
  rule 1
    action permit
    match protocol udp
    match source-port object-group dhcp_server
    match destination-port object-group dhcp_client
    enable
  exit
exit
security zone-pair users self
  rule 10
    action permit
    match protocol icmp
    enable
  exit
  rule 20
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 30
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
exit
security zone-pair users untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair SYNC self
  rule 1
    action permit
    match protocol icmp
    enable
  exit
  rule 2
    action permit
    match protocol vrrp
    enable
  exit
  rule 3
    action permit
    match protocol ah
    enable
  exit
exit

security passwords default-expired

nat source
  ruleset factory
    to zone untrusted
    rule 10
      description "replace 'source ip' by outgoing interface ip address"
      action source-nat interface
      enable
    exit
  exit
exit

ip dhcp-server
ip dhcp-server pool ap-pool
  network 192.168.1.0/24
  address-range 192.168.1.4-192.168.1.254
  default-router 192.168.1.1
  dns-server 192.168.1.1
  option 42 ip-address 192.168.1.1
  vendor-specific
    suboption 12 ascii-text "192.168.1.1"
    suboption 15 ascii-text "https://192.168.1.1:8043"
  exit
exit
ip dhcp-server pool users-pool
  network 192.168.2.0/24
  address-range 192.168.2.4-192.168.2.254
  default-router 192.168.2.1
  dns-server 192.168.2.1
exit

softgre-controller
  nas-ip-address 127.0.0.1
  data-tunnel configuration wlc
  aaa radius-profile default_radius
  keepalive-disable
  service-vlan add 3
  enable
exit

wlc
  outside-address 192.168.1.1
  service-activator
    aps join auto
  exit
  airtune
    enable
  exit
  ap-location default-location
    description "default-location"
    mode tunnel
    ap-profile default-ap
    ssid-profile default-ssid
  exit
  ssid-profile default-ssid
    description "default-ssid"
    ssid "default-ssid"
    radius-profile default-radius
    vlan-id 3
    security-mode WPA2_1X
    802.11kv
    band 2g
    band 5g
    enable
  exit
  ap-profile default-ap
    password ascii-text password
  exit
  radius-profile default-radius
    auth-address 192.168.1.1
    auth-password ascii-text password
    domain default
  exit
  ip-pool default-ip-pool
    description "default-ip-pool"
    ap-location default-location
  exit
  enable
exit

ip ssh server

clock timezone gmt +7

ntp enable
ntp server 100.110.0.65
  minpoll 1
  maxpoll 4
exit

...

Создайте object-group для открытия портов в настройках Firewall, через которые синхронизируются журналы WLC:

Блок кода
titleWLC-1
wlc-1(config)# object-group service journal_sync

Укажите порт, который используется для синхронизации журналов WLC:

Блок кода
titleWLC-1
wlc-1(config-object-group-service)# port-range 5432
wlc-1(config-object-group-service)# exit

Создайте object-group для открытия портов в настройках Firewall, через которые синхронизируются туннели SoftGRE:

Блок кода
titleWLC-1
wlc-1(config)# object-group service softgre_controller

...

Перейдите в конфигурацию security-zone и откройте порты для синхронизации сертификатов и , SoftGRE-туннелей и журналов WLC:

Блок кода
titleWLC-1
wlc-1(config)# security zone-pair SYNC self

Создайте новое правило:

Блок кода
titleWLC-1
wlc-1(config-security-zone-pair)# rule 4

Укажите действие правила – разрешение:

Блок кода
titleWLC-1
wlc-1(config-security-zone-pair-rule)# action permit

Укажите совпадение по протоколу TCP:

Блок кода
titleWLC-1
wlc-1(config-security-zone-pair SYNC self-rule)# match protocol tcp

Укажите совпадение по порту назначения, в качестве которого выступает object-group:

Блок кода
titleWLC-1
wlc-1(config-security-zone-pair-rule)# match destination-port object-group softgre_controller

Включите правило:

Блок кода
titleWLC-1
wlc-1(config-security-zone-pair-rule)# enable
wlc-1(config-security-zone-pair-rule)# exit
wlc-1(config-security-zone-pair)# exit

Создайте новое правило:

Блок кода
titleWLC-1
wlc-1(config-security-zone-pair)# rule 410

Укажите действие правила – разрешение:

...

Блок кода
titleWLC-1
wlc-1(config-security-zone-pair-rule)# match destination-port object-group softgre_controllerjournal_sync

Scroll Pagebreak

Включите правило:

Блок кода
titleWLC-1
wlc-1(config-security-zone-pair-rule)# enable
wlc-1(config-security-zone-pair-rule)# exit
wlc-1(config-security-zone-pair)# exit

...

Раскрыть
Блок кода
cluster
  cluster-interface bridge 1
  unit 1
    mac-address e4:5a:d4:a0:be:35
  exit
  unit 2
    mac-address a8:f9:4b:af:35:84
  exit
  enable
exit

hostname wlc-1 
hostname wlc-1 unit 1
hostname wlc-2 unit 2

object-group service airtune
  port-range 8099
exit
object-group service dhcp_client
  port-range 68
exit
object-group service dhcp_server
  port-range 67
exit
object-group service dns
  port-range 53
exit
object-group service netconf
  port-range 830
exit
object-group service ntp
  port-range 123
exit
object-group service radius_auth
  port-range 1812
exit
object-group service sa
  port-range 8043-8044
exit
object-group service ssh
  port-range 22
exit
object-group service sync
  port-range 873
exit
object-group service journal_sync
  port-range 5432
exit
object-group service softgre_controller
  port-range 1337
exit
object-group service FAILOVER
  port-range 9999
exit
object-group network SYNC_SRC
  ip address-range 198.51.100.254 unit 1
  ip address-range 198.51.100.253 unit 2
exit
object-group network SYNC_DST
  ip address-range 198.51.100.253 unit 1
  ip address-range 198.51.100.254 unit 2
exit

syslog max-files 3
syslog file-size 512
syslog file tmpsys:syslog/default
  severity info
exit

radius-server local
  nas ap
    key ascii-text password
    network 192.168.1.0/24
  exit
  nas local
    key ascii-text password
    network 127.0.0.1/32
  exit
  domain default
    user test
      password ascii-text password1
    exit
  exit
  virtual-server default
    enable
  exit
  enable
exit
radius-server host 127.0.0.1
  key ascii-text password
exit
aaa radius-profile default_radius
  radius-server host 127.0.0.1
exit

boot host auto-config
boot host auto-update

vlan 3
  force-up
exit
vlan 2449
  force-up
exit
vlan 2
exit

no spanning-tree

domain lookup enable

security zone trusted
exit
security zone untrusted
exit
security zone users
exit
security zone SYNC
exit

bridge 1
  vlan 1
  security-zone SYNC
  ip address 198.51.100.254/24 unit 1
  ip address 198.51.100.253/24 unit 2
  vrrp id 1
  vrrp ip 198.51.100.1/24
  vrrp group 1
  vrrp
  enable
exit
bridge 2
  vlan 2
  security-zone untrusted
  ip address dhcp
  no spanning-tree
  enable
exit
bridge 3
  vlan 3
  mtu 1458
  security-zone users
  ip address 192.168.2.3/24 unit 1
  ip address 192.168.2.2/24 unit 2
  vrrp id 3
  vrrp ip 192.168.2.1/32
  vrrp group 1
  vrrp timers garp refresh 60
  vrrp
  no spanning-tree
  enable
exit
bridge 5
  vlan 2449
  security-zone trusted
  ip address 192.168.1.3/24 unit 1
  ip address 192.168.1.2/24 unit 2
  vrrp id 2
  vrrp ip 192.168.1.1/32
  vrrp group 1
  vrrp
  no spanning-tree
  enable
exit
interface gigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 1/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 1/0/4
  mode switchport
exit
interface tengigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 1/0/2
  mode switchport
exit
interface gigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 2/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 2/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 2/0/4
  mode switchport
exit
interface tengigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 2/0/2
  mode switchport
exit

tunnel softgre 1
  mode data
  local address 192.168.1.1
  default-profile
  enable
exit

ip failover
  local-address object-group SYNC_SRC
  remote-address object-group SYNC_DST
  vrrp-group 1
exit

security zone-pair trusted self
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group ssh
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 12
    action permit
    match protocol tcp
    match destination-port object-group sync
    enable
  exit
  rule 20
    action permit
    match protocol icmp
    enable
  exit
  rule 30
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group ntp
    enable
  exit
  rule 50
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 60
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
  rule 70
    action permit
    match protocol tcp
    match destination-port object-group netconf
    enable
  exit
  rule 80
    action permit
    match protocol tcp
    match destination-port object-group sa
    enable
  exit
  rule 90
    action permit
    match protocol udp
    match destination-port object-group radius_auth
    enable
  exit
  rule 100
    action permit
    match protocol gre
    enable
  exit
  rule 110
    action permit
    match protocol tcp
    match destination-port object-group airtune
    enable
  exit
exit
security zone-pair trusted trusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair trusted untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair untrusted self
  rule 1
    action permit
    match protocol udp
    match source-port object-group dhcp_server
    match destination-port object-group dhcp_client
    enable
  exit
exit
security zone-pair users self
  rule 10
    action permit
    match protocol icmp
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 20
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 30
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
exit
security zone-pair users untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair SYNC self
  rule 1
    action permit
    match protocol icmp
    enable
  exit
  rule 2
    action permit
    match protocol vrrp
    enable
  exit
  rule 3
    action permit
    match protocol ah
    enable
  exit
  rule 4
    action permit
    match protocol tcp
    match destination-port object-group softgre_controller
    enable 
  exit
  rule 5
    action permit
    match protocol udp
    match destination-port object-group FAILOVER
    enable
  exit
exit
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group journal_sync
    enable
  exit
exit 

security passwords default-expired

nat source
  ruleset factory
    to zone untrusted
    rule 10
      description "replace 'source ip' by outgoing interface ip address"
      action source-nat interface
      enable
    exit
  exit
exit

ip dhcp-server
ip dhcp-server pool ap-pool
  network 192.168.1.0/24
  address-range 192.168.1.4-192.168.1.254
  default-router 192.168.1.1
  dns-server 192.168.1.1
  option 42 ip-address 192.168.1.1
  vendor-specific
    suboption 12 ascii-text "192.168.1.1"
    suboption 15 ascii-text "https://192.168.1.1:8043"
  exit
exit
ip dhcp-server pool users-pool
  network 192.168.2.0/24
  address-range 192.168.2.4-192.168.2.254
  default-router 192.168.2.1
  dns-server 192.168.2.1
exit
ip dhcp-server failover
  mode active-standby
  enable
exit

softgre-controller
  nas-ip-address 127.0.0.1
  failover
  data-tunnel configuration wlc
  aaa radius-profile default_radius
  keepalive-disable
  service-vlan add 3
  enable
exit

wlc
  outside-address 192.168.1.1
  service-activator
    aps join auto
  exit
  airtune
    enable
  exit
  failover
  ap-location default-location
    description "default-location"
    mode tunnel
    ap-profile default-ap
    ssid-profile default-ssid
  exit
  ssid-profile default-ssid
    description "default-ssid"
    ssid "default-ssid"
    radius-profile default-radius
    vlan-id 3
    security-mode WPA2_1X
    802.11kv
    band 2g
    band 5g
    enable
  exit
  ap-profile default-ap
    password ascii-text password
  exit
  radius-profile default-radius
    auth-address 192.168.1.1
    auth-password ascii-text password
    domain default
  exit
  ip-pool default-ip-pool
    description "default-ip-pool"
    ap-location default-location
  exit
  enable
exit

ip ssh server

clock timezone gmt +7

ntp enable
ntp server 100.110.0.65
  minpoll 1
  maxpoll 4
exit

crypto-sync
  remote-delete
  enable
exit

...

Раскрыть
Блок кода
cluster
  cluster-interface bridge 1
  unit 1
    mac-address e4:5a:d4:a0:be:35
  exit
  unit 2
    mac-address a8:f9:4b:af:35:84
  exit
  enable
exit

hostname wlc-1 
hostname wlc-1 unit 1
hostname wlc-2 unit 2

object-group service airtune
  port-range 8099
exit
object-group service dhcp_client
  port-range 68
exit
object-group service dhcp_server
  port-range 67
exit
object-group service dns
  port-range 53
exit
object-group service netconf
  port-range 830
exit
object-group service ntp
  port-range 123
exit
object-group service radius_auth
  port-range 1812
exit
object-group service sa
  port-range 8043-8044
exit
object-group service ssh
  port-range 22
exit
object-group service sync
  port-range 873
exit
object-group service journal_sync
  port-range 5432
exit
object-group service softgre_controller
  port-range 1337
exit
object-group network SYNC_SRC
  ip address-range 198.51.100.254 unit 1
  ip address-range 198.51.100.253 unit 2
exit
object-group network SYNC_DST
  ip address-range 198.51.100.253 unit 1
  ip address-range 198.51.100.254 unit 2
exit

syslog max-files 3
syslog file-size 512
syslog file tmpsys:syslog/default
  severity info
exit

radius-server local
  nas ap
    key ascii-text password
    network 192.168.1.0/24
  exit
  nas local
    key ascii-text password
    network 127.0.0.1/32
  exit
  domain default
    user test
      password ascii-text password1
    exit
  exit
  virtual-server default
    enable
  exit
  enable
exit
radius-server host 127.0.0.1
  key ascii-text password
exit
aaa radius-profile default_radius
  radius-server host 127.0.0.1
exit

boot host auto-config
boot host auto-update

vlan 3
  force-up
exit
vlan 2449
  force-up
exit
vlan 2
exit
vlan 20
exit

no spanning-tree

domain lookup enable

security zone trusted
exit
security zone untrusted
exit
security zone users
exit
security zone SYNC
exit

bridge 1
  vlan 1
  security-zone SYNC
  ip address 198.51.100.254/24 unit 1
  ip address 198.51.100.253/24 unit 2
  vrrp id 1
  vrrp ip 198.51.100.1/24
  vrrp group 1
  vrrp
  enable
exit
bridge 2
  description "ISP1_ISP2"
  vlan 2
  security-zone untrusted
  ip address 192.0.3.4/24 unit 1
  ip address 192.0.3.3/24 unit 2
  vrrp id 4
  vrrp ip 192.0.3.2/24
  vrrp group 1
  vrrp
  no spanning-tree
  enable 
exit
bridge 3
  vlan 3
  mtu 1458
  security-zone users
  ip address 192.168.2.3/24 unit 1
  ip address 192.168.2.2/24 unit 2
  vrrp id 3
  vrrp ip 192.168.2.1/32
  vrrp group 1
  vrrp timers garp refresh 60
  vrrp
  no spanning-tree
  enable
exit
bridge 5
  vlan 2449
  security-zone trusted
  ip address 192.168.1.3/24 unit 1
  ip address 192.168.1.2/24 unit 2
  vrrp id 2
  vrrp ip 192.168.1.1/32
  vrrp group 1
  vrrp
  no spanning-tree
  enable
exit
 bridge 20
  description "ISP1_ISP2"
  vlan 20
  security-zone untrusted
  ip address 192.0.4.4/24 unit 1
  ip address 192.0.4.3/24 unit 2
  vrrp id 4
  vrrp ip 192.0.4.2/32
  vrrp group 1
  vrrp
  no spanning-tree
  enable  
exit

interface gigabitethernet 1/0/1
  mode switchport
  switchport trunk allowed vlan add 2,20
exit
interface gigabitethernet 1/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 1/0/4
  mode switchport
exit
interface tengigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 1/0/2
  mode switchport
exit
interface gigabitethernet 2/0/1
  mode switchport
  switchport trunk allowed vlan add 2,20
exit
interface gigabitethernet 2/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 2/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 2/0/4
  mode switchport
exit
interface tengigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 2/0/2
  mode switchport
exit

tunnel softgre 1
  mode data
  local address 192.168.1.1
  default-profile
  enable
exit

ip failover
  local-address object-group SYNC_SRC
  remote-address object-group SYNC_DST
  vrrp-group 1
exit

security zone-pair trusted self
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group ssh
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 12
    action permit
    match protocol tcp
    match destination-port object-group softgre_controller
    enable
  exit
  rule 13
    action permit
    match protocol tcp
    match destination-port object-group sync
    enable
  exit
  rule 20
    action permit
    match protocol icmp
    enable
  exit
  rule 30
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group ntp
    enable
  exit
  rule 50
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 60
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
  rule 70
    action permit
    match protocol tcp
    match destination-port object-group netconf
    enable
  exit
  rule 80
    action permit
    match protocol tcp
    match destination-port object-group sa
    enable
  exit
  rule 90
    action permit
    match protocol udp
    match destination-port object-group radius_auth
    enable
  exit
  rule 100
    action permit
    match protocol gre
    enable
  exit
  rule 110
    action permit
    match protocol tcp
    match destination-port object-group airtune
    enable
  exit
exit
security zone-pair trusted trusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair trusted untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair untrusted self
  rule 1
    action permit
    match protocol udp
    match source-port object-group dhcp_server
    match destination-port object-group dhcp_client
    enable
  exit
exit
security zone-pair users self
  rule 10
    action permit
    match protocol icmp
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 20
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 30
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
exit
security zone-pair users untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair SYNC self
  rule 1
    action permit
    match protocol icmp
    enable
  exit
  rule 2
    action permit
    match protocol vrrp
    enable
  exit
  rule 3
    action permit
    match protocol ah
    enable
  exit
exit


security passwords default-expired

nat source
  ruleset factory
    to zone untrusted
    rule 10
      description "replace 'source ip' by outgoing interface ip address"
      action source-nat interface
      enable
    exit
  exit
exit

ip dhcp-server
ip dhcp-server pool ap-pool
  network 192.168.1.0/24
  address-range 192.168.1.4-192.168.1.254
  default-router 192.168.1.1
  dns-server 192.168.1.1
  option 42 ip-address 192.168.1.1
  vendor-specific
    suboption 12 ascii-text "192.168.1.1"
    suboption 15 ascii-text "https://192.168.1.1:8043"
  exit
exit
ip dhcp-server pool users-pool
  network 192.168.2.0/24
  address-range 192.168.2.4-192.168.2.254
  default-router 192.168.2.1
  dns-server 192.168.2.1
exit
ip dhcp-server failover
  mode active-standby
  enable
exit

softgre-controller
  nas-ip-address 127.0.0.1
  failover
  data-tunnel configuration wlc
  aaa radius-profile default_radius
  keepalive-disable
  service-vlan add 3
  enable
exit

wlc
  outside-address 192.168.1.1
  service-activator
    aps join auto
  exit
  airtune
    enable
  exit
  failover
  ap-location default-location
    description "default-location"
    mode tunnel
    ap-profile default-ap
    ssid-profile default-ssid
  exit
  ssid-profile default-ssid
    description "default-ssid"
    ssid "default-ssid"
    radius-profile default-radius
    vlan-id 3
    security-mode WPA2_1X
    802.11kv
    band 2g
    band 5g
    enable
  exit
  ap-profile default-ap
    password ascii-text password
  exit
  radius-profile default-radius
    auth-address 192.168.1.1
    auth-password ascii-text password
    domain default
  exit
  ip-pool default-ip-pool
    description "default-ip-pool"
    ap-location default-location
  exit
  enable
exit

ip ssh server

clock timezone gmt +7

ntp enable
ntp server 100.110.0.65
  minpoll 1
  maxpoll 4
exit

crypto-sync
  remote-delete
  enable
exit

...

Раскрыть
Блок кода
cluster
  cluster-interface bridge 1
  unit 1
    mac-address e4:5a:d4:a0:be:35
  exit
  unit 2
    mac-address a8:f9:4b:af:35:84
  exit
  enable
exit

hostname wlc-1 
hostname wlc-1 unit 1
hostname wlc-2 unit 2

object-group service airtune
  port-range 8099
exit
object-group service dhcp_client
  port-range 68
exit
object-group service dhcp_server
  port-range 67
exit
object-group service dns
  port-range 53
exit
object-group service netconf
  port-range 830
exit
object-group service ntp
  port-range 123
exit
object-group service radius_auth
  port-range 1812
exit
object-group service sa
  port-range 8043-8044
exit
object-group service ssh
  port-range 22
exit
object-group service sync
  port-range 873
exit
object-group service journal_sync
  port-range 5432
exit
object-group service softgre_controller
  port-range 1337
exit
object-group network SYNC_SRC
  ip address-range 198.51.100.254 unit 1
  ip address-range 198.51.100.253 unit 2
exit
object-group network SYNC_DST
  ip address-range 198.51.100.253 unit 1
  ip address-range 198.51.100.254 unit 2
exit

syslog max-files 3
syslog file-size 512
syslog file tmpsys:syslog/default
  severity info
exit

radius-server local
  nas ap
    key ascii-text password
    network 192.168.1.0/24
  exit
  nas local
    key ascii-text password
    network 127.0.0.1/32
  exit
  domain default
    user test
      password ascii-text password1
    exit
  exit
  virtual-server default
    enable
  exit
  enable
exit
radius-server host 127.0.0.1
  key ascii-text password
exit
aaa radius-profile default_radius
  radius-server host 127.0.0.1
exit

boot host auto-config
boot host auto-update

vlan 3
  force-up
exit
vlan 2449
  force-up
exit
vlan 2
exit

no spanning-tree

domain lookup enable

security zone trusted
exit
security zone untrusted
exit
security zone users
exit
security zone SYNC
exit

bridge 1
  vlan 1
  security-zone SYNC
  ip address 198.51.100.254/24 unit 1
  ip address 198.51.100.253/24 unit 2
  vrrp id 1
  vrrp ip 198.51.100.1/24
  vrrp group 1
  vrrp
  enable
exit
bridge 2
  vlan 2
  security-zone untrusted
  ip address 192.0.3.2/24 unit 1
  ip address 192.0.3.1/24 unit 2
  vrrp id 4
  vrrp ip 203.0.113.252/32
  vrrp group 1
  vrrp
  no spanning-tree
  enable 
exit
bridge 3
  vlan 3
  mtu 1458
  security-zone users
  ip address 192.168.2.3/24 unit 1
  ip address 192.168.2.2/24 unit 2
  vrrp id 3
  vrrp ip 192.168.2.1/32
  vrrp group 1
  vrrp timers garp refresh 60 
  vrrp
  no spanning-tree
  enable
exit
bridge 5
  vlan 2449
  security-zone trusted
  ip address 192.168.1.3/24 unit 1
  ip address 192.168.1.2/24 unit 2
  vrrp id 2
  vrrp ip 192.168.1.1/32
  vrrp group 1
  vrrp
  no spanning-tree
  enable
exit
interface gigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 1/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 1/0/4
  mode switchport
exit
interface tengigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 1/0/2
  mode switchport
exit
interface gigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 2/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 2/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 2/0/4
  mode switchport
exit
interface tengigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 2/0/2
  mode switchport
exit

tunnel softgre 1
  mode data
  local address 192.168.1.1
  default-profile
  enable
exit

ip failover
  local-address object-group SYNC_SRC
  remote-address object-group SYNC_DST
  vrrp-group 1
exit

security zone-pair trusted self
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group ssh
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 12
    action permit
    match protocol tcp
    match destination-port object-group softgre_controller
    enable
  exit
  rule 13
    action permit
    match protocol tcp
    match destination-port object-group sync
    enable
  exit
  rule 20
    action permit
    match protocol icmp
    enable
  exit
  rule 30
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group ntp
    enable
  exit
  rule 50
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 60
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
  rule 70
    action permit
    match protocol tcp
    match destination-port object-group netconf
    enable
  exit
  rule 80
    action permit
    match protocol tcp
    match destination-port object-group sa
    enable
  exit
  rule 90
    action permit
    match protocol udp
    match destination-port object-group radius_auth
    enable
  exit
  rule 100
    action permit
    match protocol gre
    enable
  exit
  rule 110
    action permit
    match protocol tcp
    match destination-port object-group airtune
    enable
  exit
exit
security zone-pair trusted trusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair trusted untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair untrusted self
  rule 1
    action permit
    match protocol udp
    match source-port object-group dhcp_server
    match destination-port object-group dhcp_client
    enable
  exit
exit
security zone-pair users self
  rule 10
    action permit
    match protocol icmp
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 20
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 30
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
exit
security zone-pair users untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair SYNC self
  rule 1
    action permit
    match protocol icmp
    enable
  exit
  rule 2
    action permit
    match protocol vrrp
    enable
  exit
  rule 3
    action permit
    match protocol ah
    enable
  exit
exit

security passwords default-expired

nat source
  ruleset factory
    to zone untrusted
    rule 10
      description "replace 'source ip' by outgoing interface ip address"
      action source-nat interface
      enable
    exit
  exit
exit

ip dhcp-server
ip dhcp-server pool ap-pool
  network 192.168.1.0/24
  address-range 192.168.1.4-192.168.1.254
  default-router 192.168.1.1
  dns-server 192.168.1.1
  option 42 ip-address 192.168.1.1
  vendor-specific
    suboption 12 ascii-text "192.168.1.1"
    suboption 15 ascii-text "https://192.168.1.1:8043"
  exit
exit
ip dhcp-server pool users-pool
  network 192.168.2.0/24
  address-range 192.168.2.4-192.168.2.254
  default-router 192.168.2.1
  dns-server 192.168.2.1
exit
ip dhcp-server failover
  mode active-standby
  enable
exit

softgre-controller
  nas-ip-address 127.0.0.1
  failover
  data-tunnel configuration wlc
  aaa radius-profile default_radius
  keepalive-disable
  service-vlan add 3
  enable
exit

wlc
  outside-address 192.168.1.1
  service-activator
    aps join auto
  exit
  airtune
    enable
  exit
  failover
  ap-location default-location
    description "default-location"
    mode tunnel
    ap-profile default-ap
    ssid-profile default-ssid
  exit
  ssid-profile default-ssid
    description "default-ssid"
    ssid "default-ssid"
    radius-profile default-radius
    vlan-id 3
    security-mode WPA2_1X
    802.11kv
    band 2g
    band 5g
    enable
  exit
  ap-profile default-ap
    password ascii-text password
  exit
  radius-profile default-radius
    auth-address 192.168.1.1
    auth-password ascii-text password
    domain default
  exit
  ip-pool default-ip-pool
    description "default-ip-pool"
    ap-location default-location
  exit
  enable
exit

ip ssh server

clock timezone gmt +7

ntp enable
ntp server 100.110.0.65
  minpoll 1
  maxpoll 4
exit

crypto-sync
  remote-delete
  enable
exit

...

Раскрыть
Блок кода
cluster
  cluster-interface bridge 1
  unit 1
    mac-address e4:5a:d4:a0:be:35
  exit
  unit 2
    mac-address a8:f9:4b:af:35:84
  exit
  enable
exit

hostname wlc-1 
hostname wlc-1 unit 1
hostname wlc-2 unit 2

object-group service airtune
  port-range 8099
exit
object-group service dhcp_client
  port-range 68
exit
object-group service dhcp_server
  port-range 67
exit
object-group service dns
  port-range 53
exit
object-group service netconf
  port-range 830
exit
object-group service ntp
  port-range 123
exit
object-group service radius_auth
  port-range 1812
exit
object-group service sa
  port-range 8043-8044
exit
object-group service ssh
  port-range 22
exit
object-group service sync
  port-range 873
exit
object-group service journal_sync
  port-range 5432
exit
object-group service softgre_controller
  port-range 1337
exit
object-group network SYNC_SRC
  ip address-range 198.51.100.254 unit 1
  ip address-range 198.51.100.253 unit 2
exit
object-group network SYNC_DST
  ip address-range 198.51.100.253 unit 1
  ip address-range 198.51.100.254 unit 2
exit

syslog max-files 3
syslog file-size 512
syslog file tmpsys:syslog/default
  severity info
exit

radius-server local
  nas ap
    key ascii-text password
    network 192.168.1.0/24
  exit
  nas local
    key ascii-text password
    network 127.0.0.1/32
  exit
  domain default
    user test
      password ascii-text password1
    exit
  exit
  virtual-server default
    enable
  exit
  enable
exit
radius-server host 127.0.0.1
  key ascii-text password
exit
aaa radius-profile default_radius
  radius-server host 127.0.0.1
exit

boot host auto-config
boot host auto-update

vlan 3
  force-up
exit
vlan 2449
  force-up
exit
vlan 2
exit

no spanning-tree

domain lookup enable

security zone trusted
exit
security zone untrusted
exit
security zone users
exit
security zone SYNC
exit

bridge 1
  vlan 1
  security-zone SYNC
  ip address 198.51.100.254/24 unit 1
  ip address 198.51.100.253/24 unit 2
  vrrp id 1
  vrrp ip 198.51.100.1/24
  vrrp group 1
  vrrp
  enable
exit
bridge 2
  vlan 2
  security-zone untrusted
  ip address dhcp
  no spanning-tree
  enable
exit
bridge 3
  vlan 3
  mtu 1458
  security-zone users
  ip address 192.168.2.3/24 unit 1
  ip address 192.168.2.2/24 unit 2
  vrrp id 3
  vrrp ip 192.168.2.1/32
  vrrp group 1
  vrrp timers garp refresh 60 
  vrrp
  no spanning-tree
  enable
exit
bridge 5
  vlan 2449
  security-zone trusted
  ip address 192.168.1.3/24 unit 1
  ip address 192.168.1.2/24 unit 2
  vrrp id 2
  vrrp ip 192.168.1.1/32
  vrrp group 1
  vrrp
  no spanning-tree
  enable
exit
interface gigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 1/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 1/0/4
  mode switchport
exit
interface tengigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 1/0/2
  mode switchport
exit
interface gigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 2/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 2/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 2/0/4
  mode switchport
exit
interface tengigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 2/0/2
  mode switchport
exit

tunnel softgre 1
  mode data
  local address 192.168.1.1
  default-profile
  enable
exit

ip failover
  local-address object-group SYNC_SRC
  remote-address object-group SYNC_DST
  vrrp-group 1
exit

security zone-pair trusted self
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group ssh
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 12
    action permit
    match protocol tcp
    match destination-port object-group softgre_controller
    enable
  exit
  rule 13
    action permit
    match protocol tcp
    match destination-port object-group sync
    enable
  exit
  rule 20
    action permit
    match protocol icmp
    enable
  exit
  rule 30
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group ntp
    enable
  exit
  rule 50
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 60
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
  rule 70
    action permit
    match protocol tcp
    match destination-port object-group netconf
    enable
  exit
  rule 80
    action permit
    match protocol tcp
    match destination-port object-group sa
    enable
  exit
  rule 90
    action permit
    match protocol udp
    match destination-port object-group radius_auth
    enable
  exit
  rule 100
    action permit
    match protocol gre
    enable
  exit
  rule 110
    action permit
    match protocol tcp
    match destination-port object-group airtune
    enable
  exit
exit
security zone-pair trusted trusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair trusted untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair untrusted self
  rule 1
    action permit
    match protocol udp
    match source-port object-group dhcp_server
    match destination-port object-group dhcp_client
    enable
  exit
exit
security zone-pair users self
  rule 10
    action permit
    match protocol icmp
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 20
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 30
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
exit
security zone-pair users untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair SYNC self
  rule 1
    action permit
    match protocol icmp
    enable
  exit
  rule 2
    action permit
    match protocol vrrp
    enable
  exit
  rule 3
    action permit
    match protocol ah
    enable
  exit
exit

security passwords default-expired

nat source
  ruleset factory
    to zone untrusted
    rule 10
      description "replace 'source ip' by outgoing interface ip address"
      action source-nat interface
      enable
    exit
  exit
exit

ip dhcp-server
ip dhcp-server pool ap-pool
  network 192.168.1.0/24
  address-range 192.168.1.4-192.168.1.254
  default-router 192.168.1.1
  dns-server 192.168.1.1
  option 42 ip-address 192.168.1.1
  vendor-specific
    suboption 12 ascii-text "192.168.1.1"
    suboption 15 ascii-text "https://192.168.1.1:8043"
  exit
exit
ip dhcp-server pool users-pool
  network 192.168.2.0/24
  address-range 192.168.2.4-192.168.2.254
  default-router 192.168.2.1
  dns-server 192.168.2.1
exit
ip dhcp-server failover
  mode active-standby
  enable
exit

softgre-controller
  nas-ip-address 127.0.0.1
  failover
  data-tunnel configuration wlc
  aaa radius-profile default_radius
  keepalive-disable
  service-vlan add 3
  enable
exit

wlc
  outside-address 192.168.1.1
  service-activator
    aps join auto
  exit
  airtune
    enable
  exit
  failover
  ap-location default-location
    description "default-location"
    mode tunnel
    ap-profile default-ap
    ssid-profile default-ssid
  exit
  ssid-profile default-ssid
    description "default-ssid"
    ssid "default-ssid"
    radius-profile default-radius
    vlan-id 3
    security-mode WPA2_1X
    802.11kv
    band 2g
    band 5g
    enable
  exit
  ap-profile default-ap
    password ascii-text password
  exit
  radius-profile default-radius
    auth-address 192.168.1.1
    auth-password ascii-text password
    domain default
  exit
  ip-pool default-ip-pool
    description "default-ip-pool"
    ap-location default-location
  exit
  enable
exit

ip ssh server

clock timezone gmt +7

ntp enable
ntp server 100.110.0.65
  minpoll 1
  maxpoll 4
exit

crypto-sync
  remote-delete
  enable
exit

...

Раскрыть
Блок кода
cluster
  cluster-interface bridge 1
  unit 1
    mac-address e4:5a:d4:a0:be:35
  exit
  unit 2
    mac-address a8:f9:4b:af:35:84
  exit
  enable
exit

hostname wlc-1 
hostname wlc-1 unit 1
hostname wlc-2 unit 2

object-group service airtune
  port-range 8099
exit
object-group service dhcp_client
  port-range 68
exit
object-group service dhcp_server
  port-range 67
exit
object-group service dns
  port-range 53
exit
object-group service netconf
  port-range 830
exit
object-group service ntp
  port-range 123
exit
object-group service radius_auth
  port-range 1812
exit
object-group service sa
  port-range 8043-8044
exit
object-group service ssh
  port-range 22
exit
object-group service sync
  port-range 873
exit
object-group service journal_sync
  port-range 5432
exit
object-group service softgre_controller
  port-range 1337
exit
object-group network SYNC_SRC
  ip address-range 198.51.100.254 unit 1
  ip address-range 198.51.100.253 unit 2
exit
object-group network SYNC_DST
  ip address-range 198.51.100.253 unit 1
  ip address-range 198.51.100.254 unit 2
exit

syslog max-files 3
syslog file-size 512
syslog file tmpsys:syslog/default
  severity info
exit

radius-server local
  nas ap
    key ascii-text password
    network 192.168.1.0/24
  exit
  nas local
    key ascii-text password
    network 127.0.0.1/32
  exit
  domain default
    user test
      password ascii-text password1
    exit
  exit
  virtual-server default
    enable
  exit
  enable
exit
radius-server host 127.0.0.1
  key ascii-text password
exit
aaa radius-profile default_radius
  radius-server host 127.0.0.1
exit

boot host auto-config
boot host auto-update

vlan 3
  force-up
exit
vlan 2449
  force-up
exit
vlan 2
exit

no spanning-tree

domain lookup enable

security zone trusted
exit
security zone untrusted
exit
security zone users
exit
security zone SYNC
exit

bridge 1
  vlan 1
  security-zone SYNC
  ip address 198.51.100.254/24 unit 1
  ip address 198.51.100.253/24 unit 2
  vrrp id 1
  vrrp ip 198.51.100.1/24
  vrrp group 1
  vrrp
  enable
exit
bridge 2
  vlan 2
  security-zone untrusted
  ip address dhcp
  no spanning-tree
  enable
exit
bridge 3
  vlan 3
  mtu 1458
  security-zone users
  ip address 192.168.2.3/24 unit 1
  ip address 192.168.2.2/24 unit 2
  vrrp id 3
  vrrp ip 192.168.2.1/32
  vrrp group 1
  vrrp timers garp refresh 60 
  vrrp
  no spanning-tree
  enable
exit
bridge 5
  vlan 2449
  security-zone trusted
  ip address 192.168.1.3/24 unit 1
  ip address 192.168.1.2/24 unit 2
  vrrp id 2
  vrrp ip 192.168.1.1/32
  vrrp group 1
  vrrp
  no spanning-tree
  enable
exit
interface gigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 1/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 1/0/4
  mode switchport
exit
interface tengigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 1/0/2
  mode switchport
exit
interface gigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 2/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 2/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 2/0/4
  mode switchport
exit
interface tengigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 2/0/2
  mode switchport
exit

tunnel softgre 1
  mode data
  local address 192.168.1.1
  default-profile
  enable
exit

ip failover
  local-address object-group SYNC_SRC
  remote-address object-group SYNC_DST
  vrrp-group 1
exit

security zone-pair trusted self
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group ssh
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 12
    action permit
    match protocol tcp
    match destination-port object-group softgre_controller
    enable
  exit
  rule 13
    action permit
    match protocol tcp
    match destination-port object-group sync
    enable
  exit
  rule 20
    action permit
    match protocol icmp
    enable
  exit
  rule 30
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group ntp
    enable
  exit
  rule 50
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 60
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
  rule 70
    action permit
    match protocol tcp
    match destination-port object-group netconf
    enable
  exit
  rule 80
    action permit
    match protocol tcp
    match destination-port object-group sa
    enable
  exit
  rule 90
    action permit
    match protocol udp
    match destination-port object-group radius_auth
    enable
  exit
  rule 100
    action permit
    match protocol gre
    enable
  exit
  rule 110
    action permit
    match protocol tcp
    match destination-port object-group airtune
    enable
  exit
exit
security zone-pair trusted trusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair trusted untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair untrusted self
  rule 1
    action permit
    match protocol udp
    match source-port object-group dhcp_server
    match destination-port object-group dhcp_client
    enable
  exit
exit
security zone-pair users self
  rule 10
    action permit
    match protocol icmp
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 20
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 30
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
exit
security zone-pair users untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair SYNC self
  rule 1
    action permit
    match protocol icmp
    enable
  exit
  rule 2
    action permit
    match protocol vrrp
    enable
  exit
  rule 3
    action permit
    match protocol ah
    enable
  exit
exit

security passwords default-expired

nat source
  ruleset factory
    to zone untrusted
    rule 10
      description "replace 'source ip' by outgoing interface ip address"
      action source-nat interface
      enable
    exit
  exit
exit

ip dhcp-server
ip dhcp-server pool ap-pool
  network 192.168.1.0/24
  address-range 192.168.1.4-192.168.1.254
  default-router 192.168.1.1
  dns-server 192.168.1.1
  option 42 ip-address 192.168.1.1
  vendor-specific
    suboption 12 ascii-text "192.168.1.1"
    suboption 15 ascii-text "https://192.168.1.1:8043"
  exit
exit
ip dhcp-server pool users-pool
  network 192.168.2.0/24
  address-range 192.168.2.4-192.168.2.254
  default-router 192.168.2.1
  dns-server 192.168.2.1
exit

softgre-controller
  nas-ip-address 127.0.0.1
  failover
  data-tunnel configuration wlc
  aaa radius-profile default_radius
  keepalive-disable
  service-vlan add 3
  enable
exit

wlc
  outside-address 192.168.1.1
  service-activator
    aps join auto
  exit
  airtune
    enable
  exit
  failover
  ap-location default-location
    description "default-location"
    mode tunnel
    ap-profile default-ap
    ssid-profile default-ssid
  exit
  ssid-profile default-ssid
    description "default-ssid"
    ssid "default-ssid"
    radius-profile default-radius
    vlan-id 3
    security-mode WPA2_1X
    802.11kv
    band 2g
    band 5g
    enable
  exit
  ap-profile default-ap
    password ascii-text password
  exit
  radius-profile default-radius
    auth-address 192.168.1.1
    auth-password ascii-text password
    domain default
  exit
  ip-pool default-ip-pool
    description "default-ip-pool"
    ap-location default-location
  exit
  enable
exit

ip ssh server

clock timezone gmt +7

ntp enable
ntp server 100.110.0.65
  minpoll 1
  maxpoll 4
exit

crypto-sync
  remote-delete
  enable
exit

...

Раскрыть
Блок кода
cluster
  cluster-interface bridge 1
  unit 1
    mac-address e4:5a:d4:a0:be:35
  exit
  unit 2
    mac-address a8:f9:4b:af:35:84
  exit
  enable
exit

hostname wlc-1 
hostname wlc-1 unit 1
hostname wlc-2 unit 2

object-group service airtune
  port-range 8099
exit
object-group service dhcp_client
  port-range 68
exit
object-group service dhcp_server
  port-range 67
exit
object-group service dns
  port-range 53
exit
object-group service netconf
  port-range 830
exit
object-group service ntp
  port-range 123
exit
object-group service radius_auth
  port-range 1812
exit
object-group service sa
  port-range 8043-8044
exit
object-group service ssh
  port-range 22
exit
object-group service sync
  port-range 873
exit
object-group service journal_sync
  port-range 5432
exit
object-group service softgre_controller
  port-range 1337
exit
object-group network SYNC_SRC
  ip address-range 198.51.100.254 unit 1
  ip address-range 198.51.100.253 unit 2
exit
object-group network SYNC_DST
  ip address-range 198.51.100.253 unit 1
  ip address-range 198.51.100.254 unit 2
exit

syslog max-files 3
syslog file-size 512
syslog file tmpsys:syslog/default
  severity info
exit

radius-server local
  nas ap
    key ascii-text password
    network 192.168.1.0/24
  exit
  nas local
    key ascii-text password
    network 127.0.0.1/32
  exit
  domain default
    user test
      password ascii-text password1
    exit
  exit
  virtual-server default
    enable
  exit
  enable
exit
radius-server host 127.0.0.1
  key ascii-text password
exit
aaa radius-profile default_radius
  radius-server host 127.0.0.1
exit

boot host auto-config
boot host auto-update

vlan 3
  force-up
exit
vlan 2449
  force-up
exit
vlan 2
exit

no spanning-tree

domain lookup enable

security zone trusted
exit
security zone untrusted
exit
security zone users
exit
security zone SYNC
exit

bridge 1
  vlan 1
  security-zone SYNC
  ip address 198.51.100.254/24 unit 1
  ip address 198.51.100.253/24 unit 2
  vrrp id 1
  vrrp ip 198.51.100.1/24
  vrrp group 1
  vrrp
  enable
exit
bridge 2
  vlan 2
  security-zone untrusted
  ip address dhcp
  no spanning-tree
  enable
exit
bridge 3
  vlan 3
  mtu 1458
  security-zone users
  ip address 192.168.2.3/24 unit 1
  ip address 192.168.2.2/24 unit 2
  vrrp id 3
  vrrp ip 192.168.2.1/32
  vrrp group 1
  vrrp timers garp refresh 60
  vrrp
  no spanning-tree
  enable
exit
bridge 5
  vlan 2449
  security-zone trusted
  ip address 192.168.1.3/24 unit 1
  ip address 192.168.1.2/24 unit 2
  vrrp id 2
  vrrp ip 192.168.1.1/32
  vrrp group 1
  vrrp
  no spanning-tree
  enable
exit
interface gigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 1/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 1/0/4
  mode switchport
exit
interface tengigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 1/0/2
  mode switchport
exit
interface gigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 2/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 2/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 2/0/4
  mode switchport
exit
interface tengigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 2/0/2
  mode switchport
exit

tunnel softgre 1
  mode data
  local address 192.168.1.1
  default-profile
  enable
exit

ip failover
  local-address object-group SYNC_SRC
  remote-address object-group SYNC_DST
  vrrp-group 1
exit

security zone-pair trusted self
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group ssh
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 12
    action permit
    match protocol tcp
    match destination-port object-group softgre_controller
    enable
  exit
  rule 13
    action permit
    match protocol tcp
    match destination-port object-group sync
    enable
  exit
  rule 20
    action permit
    match protocol icmp
    enable
  exit
  rule 30
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group ntp
    enable
  exit
  rule 50
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 60
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
  rule 70
    action permit
    match protocol tcp
    match destination-port object-group netconf
    enable
  exit
  rule 80
    action permit
    match protocol tcp
    match destination-port object-group sa
    enable
  exit
  rule 90
    action permit
    match protocol udp
    match destination-port object-group radius_auth
    enable
  exit
  rule 100
    action permit
    match protocol gre
    enable
  exit
  rule 110
    action permit
    match protocol tcp
    match destination-port object-group airtune
    enable
  exit
exit
security zone-pair trusted trusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair trusted untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair untrusted self
  rule 1
    action permit
    match protocol udp
    match source-port object-group dhcp_server
    match destination-port object-group dhcp_client
    enable
  exit
exit
security zone-pair users self
  rule 10
    action permit
    match protocol icmp
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 20
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 30
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
exit
security zone-pair users untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair SYNC self
  rule 1
    action permit
    match protocol icmp
    enable
  exit
  rule 2
    action permit
    match protocol vrrp
    enable
  exit
  rule 3
    action permit
    match protocol ah
    enable
  exit
exit

security passwords default-expired

nat source
  ruleset factory
    to zone untrusted
    rule 10
      description "replace 'source ip' by outgoing interface ip address"
      action source-nat interface
      enable
    exit
  exit
exit

ip dhcp-server
ip dhcp-server pool ap-pool
  network 192.168.1.0/24
  address-range 192.168.1.4-192.168.1.254
  default-router 192.168.1.1
  dns-server 192.168.1.1
  option 42 ip-address 192.168.1.1
  vendor-specific
    suboption 12 ascii-text "192.168.1.1"
    suboption 15 ascii-text "https://192.168.1.1:8043"
  exit
exit
ip dhcp-server pool users-pool
  network 192.168.2.0/24
  address-range 192.168.2.4-192.168.2.254
  default-router 192.168.2.1
  dns-server 192.168.2.1
exit
ip dhcp-server failover
  mode active-standby
  enable
exit

softgre-controller
  nas-ip-address 127.0.0.1
  failover
  data-tunnel configuration wlc
  aaa radius-profile default_radius
  keepalive-disable
  service-vlan add 3
  enable
exit

wlc
  outside-address 192.168.1.1
  service-activator
    aps join auto
  exit
  airtune
    enable
  exit
  failover
  ap-location default-location
    description "default-location"
    mode tunnel
    ap-profile default-ap
    ssid-profile default-ssid
  exit
  ssid-profile default-ssid
    description "default-ssid"
    ssid "default-ssid"
    radius-profile default-radius
    vlan-id 3
    security-mode WPA2_1X
    802.11kv
    band 2g
    band 5g
    enable
  exit
  ap-profile default-ap
    password ascii-text password
  exit
  radius-profile default-radius
    auth-address 192.168.1.1
    auth-password ascii-text password
    domain default
  exit
  ip-pool default-ip-pool
    description "default-ip-pool"
    ap-location default-location
  exit
  enable
exit

ip ssh server

clock timezone gmt +7

ntp enable
ntp server 100.110.0.65
  minpoll 1
  maxpoll 4
exit

crypto-sync
  remote-delete
  enable
exit

...

Раскрыть
Блок кода
cluster
  cluster-interface bridge 1
  unit 1
    mac-address e4:5a:d4:a0:be:35
  exit
  unit 2
    mac-address a8:f9:4b:af:35:84
  exit
  enable
exit

hostname wlc-1 
hostname wlc-1 unit 1
hostname wlc-2 unit 2

object-group service airtune
  port-range 8099
exit
object-group service dhcp_client
  port-range 68
exit
object-group service dhcp_server
  port-range 67
exit
object-group service dns
  port-range 53
exit
object-group service netconf
  port-range 830
exit
object-group service ntp
  port-range 123
exit
object-group service radius_auth
  port-range 1812
exit
object-group service sa
  port-range 8043-8044
exit
object-group service ssh
  port-range 22
exit
object-group service sync
  port-range 873
exit
object-group service journal_sync
  port-range 5432
exit
object-group service softgre_controller
  port-range 1337
exit
object-group network SYNC_SRC
  ip address-range 198.51.100.254 unit 1
  ip address-range 198.51.100.253 unit 2
exit
object-group network SYNC_DST
  ip address-range 198.51.100.253 unit 1
  ip address-range 198.51.100.254 unit 2
exit

syslog max-files 3
syslog file-size 512
syslog file tmpsys:syslog/default
  severity info
exit

radius-server local
  nas ap
    key ascii-text password
    network 192.168.1.0/24
  exit
  nas local
    key ascii-text password
    network 127.0.0.1/32
  exit
  domain default
    user test
      password ascii-text password1
    exit
  exit
  virtual-server default
    enable
  exit
  enable
exit
radius-server host 127.0.0.1
  key ascii-text password
exit
aaa radius-profile default_radius
  radius-server host 127.0.0.1
exit

boot host auto-config
boot host auto-update

vlan 3
  force-up
exit
vlan 2449
  force-up
exit
vlan 2
exit

no spanning-tree

domain lookup enable

security zone trusted
exit
security zone untrusted
exit
security zone users
exit
security zone SYNC
exit

bridge 1
  vlan 1
  security-zone SYNC
  ip address 198.51.100.254/24 unit 1
  ip address 198.51.100.253/24 unit 2
  vrrp id 1
  vrrp ip 198.51.100.1/24
  vrrp group 1
  vrrp
  enable
exit
bridge 2
  vlan 2
  security-zone untrusted
  ip address dhcp
  no spanning-tree
  enable
exit
bridge 3
  vlan 3
  mtu 1458
  security-zone users
  ip address 192.168.2.3/24 unit 1
  ip address 192.168.2.2/24 unit 2
  vrrp id 3
  vrrp ip 192.168.2.1/32
  vrrp group 1
  vrrp timers garp refresh 60 
  vrrp
  no spanning-tree
  enable
exit
bridge 5
  vlan 2449
  security-zone trusted
  ip address 192.168.1.3/24 unit 1
  ip address 192.168.1.2/24 unit 2
  vrrp id 2
  vrrp ip 192.168.1.1/32
  vrrp group 1
  vrrp
  no spanning-tree
  enable
exit
interface gigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 1/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 1/0/4
  mode switchport
exit
interface tengigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 1/0/2
  mode switchport
exit
interface gigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 2/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 2/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 2/0/4
  mode switchport
exit
interface tengigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 2/0/2
  mode switchport
exit

tunnel softgre 1
  mode data
  local address 192.168.1.1
  default-profile
  enable
exit

ip failover
  local-address object-group SYNC_SRC
  remote-address object-group SYNC_DST
  vrrp-group 1
exit

security zone-pair trusted self
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group ssh
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 12
    action permit
    match protocol tcp
    match destination-port object-group softgre_controller
    enable
  exit
  rule 13
    action permit
    match protocol tcp
    match destination-port object-group sync
    enable
  exit
  rule 20
    action permit
    match protocol icmp
    enable
  exit
  rule 30
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group ntp
    enable
  exit
  rule 50
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 60
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
  rule 70
    action permit
    match protocol tcp
    match destination-port object-group netconf
    enable
  exit
  rule 80
    action permit
    match protocol tcp
    match destination-port object-group sa
    enable
  exit
  rule 90
    action permit
    match protocol udp
    match destination-port object-group radius_auth
    enable
  exit
  rule 100
    action permit
    match protocol gre
    enable
  exit
  rule 110
    action permit
    match protocol tcp
    match destination-port object-group airtune
    enable
  exit
exit
security zone-pair trusted trusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair trusted untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair untrusted self
  rule 1
    action permit
    match protocol udp
    match source-port object-group dhcp_server
    match destination-port object-group dhcp_client
    enable
  exit
exit
security zone-pair users self
  rule 10
    action permit
    match protocol icmp
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 20
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 30
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
exit
security zone-pair users untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair SYNC self
  rule 1
    action permit
    match protocol icmp
    enable
  exit
  rule 2
    action permit
    match protocol vrrp
    enable
  exit
  rule 3
    action permit
    match protocol ah
    enable
  exit
exit

security passwords default-expired

nat source
  ruleset factory
    to zone untrusted
    rule 10
      description "replace 'source ip' by outgoing interface ip address"
      action source-nat interface
      enable
    exit
  exit
exit

ip dhcp-server
ip dhcp-server pool ap-pool
  network 192.168.1.0/24
  address-range 192.168.1.4-192.168.1.254
  default-router 192.168.1.1
  dns-server 192.168.1.1
  option 42 ip-address 192.168.1.1
  vendor-specific
    suboption 12 ascii-text "192.168.1.1"
    suboption 15 ascii-text "https://192.168.1.1:8043"
  exit
exit
ip dhcp-server pool users-pool
  network 192.168.2.0/24
  address-range 192.168.2.4-192.168.2.254
  default-router 192.168.2.1
  dns-server 192.168.2.1
exit
ip dhcp-server failover
  mode active-standby
  enable
exit

softgre-controller
  nas-ip-address 127.0.0.1
  failover
  data-tunnel configuration wlc
  aaa radius-profile default_radius
  keepalive-disable
  service-vlan add 3
  enable
exit

wlc
  outside-address 192.168.1.1
  service-activator
    aps join auto
  exit
  airtune
    enable
  exit
  failover
  ap-location default-location
    description "default-location"
    mode tunnel
    ap-profile default-ap
    ssid-profile default-ssid
  exit
  ssid-profile default-ssid
    description "default-ssid"
    ssid "default-ssid"
    radius-profile default-radius
    vlan-id 3
    security-mode WPA2_1X
    802.11kv
    band 2g
    band 5g
    enable
  exit
  ap-profile default-ap
    password ascii-text password
  exit
  radius-profile default-radius
    auth-address 192.168.1.1
    auth-password ascii-text password
    domain default
  exit
  ip-pool default-ip-pool
    description "default-ip-pool"
    ap-location default-location
  exit
  enable
exit

ip ssh server

clock timezone gmt +7

ntp enable
ntp server 100.110.0.65
  minpoll 1
  maxpoll 4
exit

crypto-sync
  remote-delete
  enable
exit

...

Раскрыть
Блок кода
cluster
  cluster-interface bridge 1
  unit 1
    mac-address e4:5a:d4:a0:be:35
  exit
  unit 2
    mac-address a8:f9:4b:af:35:84
  exit
  enable
exit

hostname wlc-1 
hostname wlc-1 unit 1
hostname wlc-2 unit 2

object-group service airtune
  port-range 8099
exit
object-group service dhcp_client
  port-range 68
exit
object-group service dhcp_server
  port-range 67
exit
object-group service dns
  port-range 53
exit
object-group service netconf
  port-range 830
exit
object-group service ntp
  port-range 123
exit
object-group service radius_auth
  port-range 1812
exit
object-group service sa
  port-range 8043-8044
exit
object-group service ssh
  port-range 22
exit
object-group service sync
  port-range 873
exit
object-group service journal_sync
  port-range 5432
exit
object-group service softgre_controller
  port-range 1337
exit
object-group network SYNC_SRC
  ip address-range 198.51.100.254 unit 1
  ip address-range 198.51.100.253 unit 2
exit
object-group network SYNC_DST
  ip address-range 198.51.100.253 unit 1
  ip address-range 198.51.100.254 unit 2
exit

syslog max-files 3
syslog file-size 512
syslog file tmpsys:syslog/default
  severity info
exit

radius-server local
  nas ap
    key ascii-text password
    network 192.168.1.0/24
  exit
  nas local
    key ascii-text password
    network 127.0.0.1/32
  exit
  domain default
    user test
      password ascii-text password1
    exit
  exit
  virtual-server default
    enable
  exit
  enable
exit
radius-server host 127.0.0.1
  key ascii-text password
exit
aaa radius-profile default_radius
  radius-server host 127.0.0.1
exit

boot host auto-config
boot host auto-update

vlan 3
  force-up
exit
vlan 2449
  force-up
exit
vlan 2
exit

no spanning-tree

domain lookup enable

security zone trusted
exit
security zone untrusted
exit
security zone users
exit
security zone SYNC
exit

bridge 1
  vlan 1
  security-zone SYNC
  ip address 198.51.100.254/24 unit 1
  ip address 198.51.100.253/24 unit 2
  vrrp id 1
  vrrp ip 198.51.100.1/24
  vrrp group 1
  vrrp
  enable
exit
bridge 2
  vlan 2
  security-zone untrusted
  ip address 192.0.3.2/24 unit 1
  ip address 192.0.3.1/24 unit 2
  vrrp id 4
  vrrp ip 203.0.113.252/32
  vrrp group 1
  vrrp
  no spanning-tree
  enable
exit
bridge 3
  vlan 3
  mtu 1458
  security-zone users
  ip address 192.168.2.3/24 unit 1
  ip address 192.168.2.2/24 unit 2
  vrrp id 3
  vrrp ip 192.168.2.1/32
  vrrp group 1
  vrrp timers garp refresh 60 
  vrrp
  no spanning-tree
  enable
exit
bridge 5
  vlan 2449
  security-zone trusted
  ip address 192.168.1.3/24 unit 1
  ip address 192.168.1.2/24 unit 2
  vrrp id 2
  vrrp ip 192.168.1.1/32
  vrrp group 1
  vrrp
  no spanning-tree
  enable
exit
interface gigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 1/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 1/0/4
  mode switchport
exit
interface tengigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 1/0/2
  mode switchport
exit
interface gigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 2/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 2/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 2/0/4
  mode switchport
exit
interface tengigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 2/0/2
  mode switchport
exit

tunnel softgre 1
  mode data
  local address 192.168.1.1
  default-profile
  enable
exit

ip failover
  local-address object-group SYNC_SRC
  remote-address object-group SYNC_DST
  vrrp-group 1
exit

security zone-pair trusted self
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group ssh
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 12
    action permit
    match protocol tcp
    match destination-port object-group softgre_controller
    enable
  exit
  rule 13
    action permit
    match protocol tcp
    match destination-port object-group sync
    enable
  exit
  rule 20
    action permit
    match protocol icmp
    enable
  exit
  rule 30
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group ntp
    enable
  exit
  rule 50
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 60
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
  rule 70
    action permit
    match protocol tcp
    match destination-port object-group netconf
    enable
  exit
  rule 80
    action permit
    match protocol tcp
    match destination-port object-group sa
    enable
  exit
  rule 90
    action permit
    match protocol udp
    match destination-port object-group radius_auth
    enable
  exit
  rule 100
    action permit
    match protocol gre
    enable
  exit
  rule 110
    action permit
    match protocol tcp
    match destination-port object-group airtune
    enable
  exit
exit
security zone-pair trusted trusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair trusted untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair untrusted self
  rule 1
    action permit
    match protocol udp
    match source-port object-group dhcp_server
    match destination-port object-group dhcp_client
    enable
  exit
exit
security zone-pair users self
  rule 10
    action permit
    match protocol icmp
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 20
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 30
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
exit
security zone-pair users untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair SYNC self
  rule 1
    action permit
    match protocol icmp
    enable
  exit
  rule 2
    action permit
    match protocol vrrp
    enable
  exit
  rule 3
    action permit
    match protocol ah
    enable
  exit
exit

security passwords default-expired

nat source
  ruleset factory
    to zone untrusted
    rule 10
      description "replace 'source ip' by outgoing interface ip address"
      action source-nat interface
      enable
    exit
  exit
exit

ip dhcp-server
ip dhcp-server pool ap-pool
  network 192.168.1.0/24
  address-range 192.168.1.4-192.168.1.254
  default-router 192.168.1.1
  dns-server 192.168.1.1
  option 42 ip-address 192.168.1.1
  vendor-specific
    suboption 12 ascii-text "192.168.1.1"
    suboption 15 ascii-text "https://192.168.1.1:8043"
  exit
exit
ip dhcp-server pool users-pool
  network 192.168.2.0/24
  address-range 192.168.2.4-192.168.2.254
  default-router 192.168.2.1
  dns-server 192.168.2.1
exit
ip dhcp-server failover
  mode active-standby
  enable
exit

softgre-controller
  nas-ip-address 127.0.0.1
  failover
  data-tunnel configuration wlc
  aaa radius-profile default_radius
  keepalive-disable
  service-vlan add 3
  enable
exit

wlc
  outside-address 192.168.1.1
  service-activator
    aps join auto
  exit
  airtune
    enable
  exit
  failover
  ap-location default-location
    description "default-location"
    mode tunnel
    ap-profile default-ap
    ssid-profile default-ssid
  exit
  ssid-profile default-ssid
    description "default-ssid"
    ssid "default-ssid"
    radius-profile default-radius
    vlan-id 3
    security-mode WPA2_1X
    802.11kv
    band 2g
    band 5g
    enable
  exit
  ap-profile default-ap
    password ascii-text password
  exit
  radius-profile default-radius
    auth-address 192.168.1.1
    auth-password ascii-text password
    domain default
  exit
  ip-pool default-ip-pool
    description "default-ip-pool"
    ap-location default-location
  exit
  enable
exit

ip ssh server

clock timezone gmt +7

ntp enable
ntp server 100.110.0.65
  minpoll 1
  maxpoll 4
exit

crypto-sync
  remote-delete
  enable
exit

...