История страницы

...

A Shared Block

hidden	true
shared-block-key	1

Metadata list

hidden	true

|| DeviceType | Wireless access controllers  |
|| DeviceName1 | WLC-15, WLC-30, WLC-3200 |
|| DeviceType2 | ESR series service routers |
|| DeviceName2 | ESR-15, ESR-30, ESR-3100, ESR-3200 |
|| DocTitleAdditional | Release notes |
|| fwversion | 1.30.6 |

Version 1.30.6

Revisions:

...

Monitoring and management:
- CLI:
...
- - - snmp-server enable traps wlc-wids
...
- - - command to enable sending SNMP traps for WIDS events
    - Реализован функционал конвертации 43 опции DHCP из ASCII в hex (format dhcp option-43 в разделе debug)
  - WEB:
    - Реализовано улучшение UI-интерфейса
    - Monitoring
...
- - - - WIDS log
      - Доработана сортировка файлов конфигурации по дате
...
- - - - Displaying the hostname on AP monitoring pages
      - Изменён формат задания даты в фильтрах в разделе "Журнал событий"
      - Добавлено отображение параметров утилизации и интерференции в мониторинг радиоинтерфейсов ТД
    - Configuration
  ...
  - - - RADIUS server settings section
        VLAN settings section
  ...
  - - - Реализована настройка для портальной авторизации на ТД
  ...
  - - - ARP suppression configuration in the radio profile (not supported for WEP/WOP-2ac, WEP-3ax, WEP-550K)
    - WLC:
    ...
    - - Support for WEP-550K, WEP-30L-NB, WOP-3L-EX AP
    ...
    - - Synchronization of WLC logs during redundancy
        Support for portal authorization with
    - - Eltex-NAICE (
    ...
    - - for WEP-30L/WEP-30L-NB/30L-Z
    ...
    - - and WOP-30L/30LI/30LS)
    ...
    - - Support for redirecting CoA requests to radius-server local
    ...
    - - for portal authorization
        Monitoring
        Displaying the utilization and interference parameters in extended AP monitoring
        Unified format for displaying AP firmware in the
    - - show wlc ap firmwarecommand
    ...
    - - show wlc journal
    ...
    - - info command for viewing summary information about WLC logs
        Units of measurement for speed in the
    - - show wlc ap interfaces <mac>output
        Configuration
      ...
      - disconnect-on-reject
      ...
      - command in portal-profile
      ...
      - to disconnect the user upon Reject from RADIUS during MAB authentication (supported for WEP-30L/WEP-30L-NB/30L-Z
      ...
      - and WOP-30L/30LI/30LS)
      ...
      - http-auth-
      ...
      - disable command in portal-profile
      ...
      - to disable portal interaction with the AP via HTTP/HTTPS
      ...
      - during user authorization
        neighbor-scan command in ap-profile to configure passive scanning has been extended for
      ...
      - WEP-200L, WOP-20L
      ...
      - , and WEP-3ax
      ...
      - captive-adaptive
      ...
      - command in ap-profile
      ...
      - to enable portal authorization compatibility mode for iOS devices
      - redirect-url-format
      ...
      - command in portal-profile
      ...
      - to specify the format of the user's MAC address and the format of the NAS ID in the redirect address when configuring portal authorization
        description command for user in radius-server local
      ...
      - Configuring url-acl-profile
      ...
      - and ipv4-acl
      ...
      - in ap-profile
      ...
      - and portal-profile
      ...
      - to configure domain and IP address lists on the AP. The lists are used for unauthorized portal users
        Block of commands in ap-profile for configuring DAS parameters on the AP
        Block of commands in radius-server local for configuring DAS parameters used when redirecting CoA requests
        Ability to add a location name
      ...
      - (location=<AP_LOCATION>)
      ...
      - to redirect-url-custom
      ...
      - in portal-profile
      ...
      - Ability to redirect AAA RADIUS requests for different SSID to different servers
        The default value for the load-balance command in airtune-profile has been changed from “enabled” to “disabled”
      ...
      - SNMP:
        В ELTEX-WLC-MIB реализована таблица eltWlcApInfoByMacTable (1.3.6.1.4.1.35265.1.224.1.3.2.7), содержащая информацию о ТД с индексацией по MAC-адресу
        В ELTEX-WLC-MIB добавлен OID eltWlcRadioRxUtilization (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.14) для просмотра RX утилизации на ТД
        В ELTEX-WLC-MIB добавлен OID eltWlcRadioTxUtilization (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.15) для просмотра TX утилизации на ТД
        В ELTEX-WLC-MIB добавлен OID eltWlcRadioApInterferenceRatio (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.17) для просмотра помех между Wi-Fi-устройствами, которые работают на близких, но не полностью независимых каналах
        В ELTEX-WLC-MIB добавлен OID eltWlcRadioCoChannelInterference (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.18) для просмотра помех между Wi-Fi-устройствами, которые работают на одном и том же канале
        В ELTEX-WLC-MIB добавлен OID eltWlcRadioNoiseLevel (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.19) для просмотра уровня шума на радиоканала
        В ELTEX-WLC-MIB добавлен OID eltWlcRadioPacketErrorRate (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.20) для просмотра процента пакетов, повреждённых из-за помех, слабого сигнала или коллизий
        В ELTEX-WLC-MIB добавлены трапы WIDS
        В ELTEX-GENERIC-MIB добавлен OID eltexEnvMemoryAvailable (OID .1.3.6.1.4.1.35265.38.40.40.11) для просмотра available памяти
        Syslog:
        Реализована команда match process-name web для фильтрации событий WEB-сервера
      - Security:
        Licensing:
      ...
      - Increased license lifetime when ELM is unavailable
      Fixed:
      - Erroneous termination of the lic-mgr
      - Не обновляются загрузчики при обновлении ПО через WEB
      - service
      - Bootloaders are not updated when updating firmware via the WEB
      - After deleting radio-5g-profile
      - , APs switch to Cfg failed status
      - In ldap-profile
      - , it is not possible to set ldap-server
      - via a domain name
      - Not all AirTune sessions are displayed
      Version 1.30.4
      Revisions:
      - Implemented synchronization of AP firmware in the backup scheme
      - Monitoring and management:
        Addedcritlog directory to show tech-support command output
        WEB:
        Full audit of administrator actions in the WEB interface via TACACS+ / RADIUS
        Optimized operation of WEB server when operating with clients and AP
        Improved adaptation of the WEB interface to different screen resolution
        Monitoring
        Filtering on the "Access points" and "Clients" pages
        Pagination when displaying data on the "Access points", "Clients", "Event log" pages
        CPU load graph
        Client IP address on client monitoring pages
        "VLAN number" column in the virtual access points table
        "Range" column in the clients table
        Monitoring of the 802.11v parameter on the "Roaming data" page
        Client IP address changed check-box in the client log
        Unified pop-up windows and snack bars when operating with tables
        Configuration
        Portal authorization settings
        Ability to limit the traffic speed (clients, VAP, broadcast, multicast)
        Configuring the 82 DHCP option on AP in radio profile
        Configuring the 802.11v in the AirTune profile
        Configuring the "Country code" in the AP profile tocomply with localrestrictionsonchannelsandtransmitterpowercorresponding to the selectedcountry
        Changed order of settings in the SSID profile
        Configuring the IEEE 802.11 n/ac, a/n/ac modes for 5 GHz radio interface in the individual AP settings
        WLC:
        wlc-journal storage command to transfer WLC logs to HDD
        Optimized AP connection speed
        Optimized AP connection stability
        Monitoring
        Display the "VLAN" in the show wlc ap vap command output
        Display the range in which the client operates in the show wlc clients command output
        Display the ap-location in the AP log(show wlc journal ap)
        Display the band in the AP log (show wlc journal client)
        Configuration
        country-code command in the ap-profile tocomply with localrestrictionsonchannelsandtransmitterpowercorresponding to the selectedcountry
        The maximum size of WLC logs is limited to 90 days. When updating to 1.30.4 firmware version, the size of existing logs will be automatically reduced
        Configuring the MQTT positioning for WEP-1L, WEP-2L, WOP-2L, WEP-3L
        Configuring the WIDS/WIPS for WEP-200L and WOP-20L
        neighbour-scan command in the ap-profile for configuring passive scanning on WOP/WEP-30L, WEP-30L-Z, WOP-30LS, WOP-30LI
        show wlc statistics command block for displaying statistics on clients and AP events
        arp suppression command for configuring ARP conversion
        lldp-server command block in ap-profile/services for configuring LLDP
        lldp command block in ap-profile/trace for configuring LLDP logging
        Ability to add NAS IP to the redirect address when configuring portal authorization via RADIUS
        Processing of deauth-attack in WIDS
        load-balance roaming clients max/min commands in airtune-profile for configuring the maximum/minimum number of users during balancing
        802.11r cross-location-roaming command in AirTune settings to enable 802.11r roaming between locations
        Syslog:
        syslog web-commands for logging actions on WEB
        logging wlc-events/logging wlc-journal command for enabling WLC logs to syslog server
        SNMP:
        Optimization of WLC tables
      ...

Дерево страниц

Сравнение версий

Старая версия 2

Новая версия 3

Ключ

Version 1.30.6

Version 1.30.4