История страницы

...

• Monitoring and management:
  • CLI:
    • snmp-server enable traps wlc-wids command to enable sending SNMP traps for WIDS events
    • Functionality of converting 43 DHCP options from ASCII to hex has been implemented (format dhcp option-43 in the debug section)
  • WEB:
    • UI interface has been improved
    • Monitoring
      
      • WIDS log
      • Sorting of configuration files by date has been improved
      • Displaying the hostname on AP monitoring pages
      • Date format in filters in the “Event Log” section has been changed
      • Displaying the utilization and interference parameters in AP radio interfaces monitoring
    • Configuration
      • RADIUS server settings section
      • VLAN settings section
      • The configuration for portal authorization on AP has been implemented
      • ARP suppression configuration in the radio profile (not supported for WEP/WOP-2ac, WEP-3ax, WEP-550K)
  • WLC:
    • Support for WEP-550K, WEP-30L-NB, WOP-3L-EX AP
    • Synchronization of WLC logs during redundancy
    • Support for portal authorization with Eltex-NAICE (for WEP-30L/WEP-30L-NB/30L-Z and WOP-30L/30LI/30LS)
    • Support for redirecting CoA requests to radius-server local for portal authorization
    • Monitoring
      
      • Displaying the utilization and interference parameters in extended AP monitoring
      • Unified format for displaying AP firmware in the show wlc ap firmware command
      • show wlc journal info command for viewing summary information about WLC logs
      • Units of measurement for speed in the show wlc ap interfaces <mac> output
    • Configuration
      • disconnect-on-reject command in portal-profile to disconnect the user upon Reject from RADIUS during MAB authentication (supported for WEP-30L/WEP-30L-NB/30L-Z and WOP-30L/30LI/30LS)
      • http-auth-disable command in portal-profile to disable portal interaction with the AP via HTTP/HTTPS during user authorization
      • neighbor-scan command in ap-profile to configure passive scanning has been extended for WEP-200L, WOP-20L, and WEP-3ax
      • captive-adaptive command in ap-profile to enable portal authorization compatibility mode for iOS devices
      • redirect-url-format command in portal-profile to specify the format of the user's MAC address and the format of the NAS ID in the redirect address when configuring portal authorization
      • description command for user in radius-server local
      • Configuring url-acl-profile and ipv4-acl in ap-profile and portal-profile to configure domain and IP address lists on the AP. The lists are used for unauthorized portal users
      • Block of commands in ap-profile for configuring DAS parameters on the AP
      • Block of commands in radius-server local for configuring DAS parameters used when redirecting CoA requests
      • Ability to add a location name (location=<AP_LOCATION>) to redirect-url-custom in portal-profile
      • Ability to redirect AAA RADIUS requests for different SSID to different servers
      • The default value for the load-balance command in airtune-profile has been changed from “enabled” to “disabled”
  • SNMP:
    • OID eltWlcApInfoByMacTable (1.3.6.1.4.1.35265.1.224.1.3.2.7) is added to ELTEX-WLC-MIB which containsinformationabout the AP indexedbyMACaddress
    • OID eltWlcRadioRxUtilization (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.14) is added to ELTEX-WLC-MIB toview the RXdisposalon the AP
    • OID eltWlcRadioTxUtilization (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.15) is added to ELTEX-WLC-MIB toview the disposal TXT on the AP
    • OID eltWlcRadioApInterferenceRatio (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.17) is added to ELTEX-WLC-MIB toview interference between Wi-Fi devices that operate on close but not completely independent channels 
    • OID eltWlcRadioCoChannelInterference (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.18) is added to ELTEX-WLC-MIB toview interferencebetweenWi-Fidevicesthatoperateonthesamechannel
    • OID eltWlcRadioNoiseLevel (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.19) is added to ELTEX-WLC-MIB toview the noiselevelon the radio channel
    • OID eltWlcRadioPacketErrorRate (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.20) is added to ELTEX-WLC-MIB toview the percentage of packetscorrupteddue to interference,weaksignal, orcollisions
    • WIDS ladders are added to ELTEX-WLC-MIB
    • OID eltexEnvMemoryAvailable (OID .1.3.6.1.4.1.35265.38.40.40.11) is added to ELTEX-GENERIC-MIB toview available memory
  • Syslog:
    • match process-name web command to filter WEB server events
• Security:
  • Licensing:

• • • Increased license lifetime when ELM is unavailable

...