Сравнение версий

Старая версия 2

changes.mady.by.user Отдел Документации

Сохранено

по сравнению с

Новая версия 3

changes.mady.by.user Отдел Документации

Сохранено

Ключ

  • Эта строка добавлена.
  • Эта строка удалена.
  • Изменено форматирование.

...

Table 18 lists rear panel connectors of the router. 

Scroll PagebreakTable 18 – Rear panel connectors description

...

№

Front panel element

Description

1

HDD1

Connector for HDD installation.

2

HDD2

Connector for HDD installation.

3

USB1

Port for USB device connection.

4

USB2

Port for USB device connection.

5

Combo Ports [1 .. 4]

4 ports of Gigabit Ethernet 10/100/1000BASE-X (SFP).

6

XG1 – XG8

Slots for 10G SFP+/1G SFP transceivers.

7

Status

Current device status LED.

Alarm

Alarm LED.

VPN

VPN gateway operation mode LED (is not supported in the current version).

Flash

Activity of exchange with data storage – SD card or USB Flash.

Power

Device power LED.

Master

Failover mode operation LED (is not supported in the current version).

Fan

Fan operation LED.

RPS

Redundant power supply LED.

8

F

Functional key that reboots the device and resets it to factory default configuration:

  • Pressing the key for less than 10 seconds reboots the device;
  • Pressing the key for more than 10 seconds resets the terminal to factory settings.

9

Console

Console port RS-232 for local management of the device.

10

OOB

Ethernet port for router management.

Scroll Pagebreak


ESR-1700 rear panel

The rear panel of ESR-1700 is shown in the picture below.

...

№

Front panel element

Description

1

Status

Current device status LED.

Alarm

Alarm LED.

VPN

VPN gateway operation mode LED (is not supported in the current version).

Flash

Activity of exchange with data storage – SD card or USB Flash.

Power

Device power LED.

Master

Failover mode operation LED (is not supported in the current version).

Fan

Fan operation LED.

RPS

Redundant power supply LED.

2

Console

Console port RS-232 for local management of the device.

3

OOB

Ethernet port for router management.

4

SD

SD-card connector.

5

USB1

Port for USB device connection.

6

F

Functional key that reboots the device and resets it to factory default configuration:

  • Pressing the key for less than 10 seconds reboots the device;
  • Pressing the key for more than 10 seconds resets the terminal to factory settings.

7

USB2

Port for USB device connection.

8

Ethernet

4 ports of Ethernet 10/100/1000BASE-T.

9

Combo Ports [1 .. 4]

4 ports of Gigabit Ethernet 10/100/1000BASE-X (SFP).

10

XG1 – XG4

Slots for 10G SFP+/1G SFP transceivers.

...

ESR-1511, ESR-1500 rear panel

...

Side panels of the device have air vents for heat removal. Do not block air vents. This may cause the components to overheat, which may result in device malfunction. For recommendations on device installation, see section Installation and connection.scroll-pagebreak

ESR-1200, ESR-1000 design

...

Table 26 lists rear panel connectors of the router.

Scroll PagebreakTable 26 – Rear panel connectors description

...

Figure 35 – ESR-200 front panel

...

The front panel layout of ESR-100 is depicted in figure below.

...

№

Front panel element

Description

1

SD

SD-card connector.

2

USB1, USB2

2 × USB-enabled devices connection port.

3

[1 .. 4]

4 ports of Gigabit Ethernet 10/100/1000BASE-T (RJ-45).

4

Combo Ports

4 ports of Gigabit Ethernet 10/100/1000BASE-X (SFP).

5

Power

Device power LED.

Status

Current device status LED.

Alarm

Alarm LED.

Fan

Fan operation LED.

6

F

Functional key that reboots the device and resets it to factory default configuration:

  • Pressing the key for less than 10 seconds reboots the device;
  • Pressing the key for more than 10 seconds resets the terminal to factory settings.

7

Console

Console port RS-232 for local management of the device.

8

110-250 VAC
60/50 Hz max 1A

Power supply.

...


ESR-200, ESR-100 rear panel

...

Figure 39 – ESR-100 and ESR-200 left side panel

Scroll Pagebreak


ESR-21 design

The device has a metal-enclosed design for 1U 19" racks.

...

№

Front panel element

Description

1F

Functional key that reboots the device and resets it to factory default configuration:

  • pressing the key for less than 10 seconds reboots the device;
  • pressing the key for more than 10 seconds resets the device to factory default configuration.
212V DCPower supply.
3Optical ports2 ports of Gigabit Ethernet – 1000BASE-X (SFP).
4USB1, USB22 USB connectors for connecting external USB devices.

3

Console

Console port RS-232 (RJ-45) for local management of the device.

9

[3 .. 6]

4 ports of Gigabit Ethernet 10/100/1000BASE-T (RJ-45).

...


ESR-15 top panel

The top panel layout of ESR-10 is depicted in figure below.

...

Table 35 – Description of front panel LEDs

№

Top panel element

Description

1

Power

Device power and operation status LED

2

-

The LED is not used

3

USB1, USB2

External USB devices LED

4

[1 .. 2]

Ethernet ports LED

5

[3 .. 6]

Optical interfaces LED

Scroll Pagebreak


ESR-14VF, ESR-12VF design

...

№

Description

1

Earth bonding point of the device.

...


ESR-12VF, ESR-14VF side panels

...

Table 38 lists connectors, LEDs and controls located on the front panel of ESR-12VF router.scroll-pagebreak

Table 38  – Description of connectors, LEDs and controls located on ESR-12V front panel

...

Table 39 lists rear panel connectors of the router.

Scroll PagebreakTable 39 – Rear panel connectors description

...

Table 40 lists connectors, LEDs and controls located on the rear panel of ESR-10. scroll-pagebreak

Table 40 – Description of connectors, LEDs and controls located on ESR-10 rear panel

...

№

Side panel element

Description

1

F

Functional key that reboots the device and resets it to factory default configuration:

  • pressing the key for less than 10 seconds reboots the device.
  • pressing the key for more than 10 seconds resets the device to factory default configuration.

...


ESR-10 top panel

The top panel layout of ESR-10 is depicted in figure below.

...

№

Top panel element

Description

1

Power

Device power and operation status LED.

2

-

The LED is not used.

3

USB1, USB2

External USB devices LED.

4

[1 .. 4]

Ethernet ports LED.

5

[5 .. 6]

Optical interfaces LED.

Scroll Pagebreak


Light Indication
Якорь
light
light

...

Figure 63 – Location of optical interface indicatorsscroll-pagebreak

Table 43 – Light indication of copper interface status

SPEED indicator is lit

LINK/ACT indicator is lit

Ethernet interface state

Off

Off

The port is disabled or connection is not established.

Off

Solid on

10Mbps or 100Mbps connection is established.

Solid on

Solid on

1000Mbps connection is established.

X

Flashes

Data transfer is in progress.

Table 44 – Light indication of SFP/SFP+/QSFP+ interface status

...

Table 45 – Status of system indicators

Indicator name

Indicator function

LED State

Device State

Status

Current device status LED.

Green

Device is in normal operation state.

Red

The device is in the firmware download state.

Alarm

Alarm LED.

-

-

VPN

Active VPN sessions indicator.

-

-

Flash

Activity indicator of exchange with data storages: SD-card or USB Flash.

Green

Read/write operation execution with 'copy' command.

Power

Device power LED.

Green

Device power is normal. Main power supply, if installed, is operational.

Orange

Main power supply failure, fault, or the primary network is missing.

Off

Device internal power supply failure.

Master

Indicator of failover modes operation.

-

-

Fan

Cooling fan status.

Off

All fans are operational.

Red

One or more fans has failed. Possible cause of failure: at least one of the fans has stopped or is working at lower rpm.

RPS

Backup power supply operation mode.

Green

Backup power supply is installed and operational.

Off

Backup power supply is not installed.

Red

Backup power supply is missing or failed.

WLC-3200, ESR-3200, ESR-3100, ESR-1511, ESR-1500 light indication

...

scroll-pagebreak
Якорь
table33_desc
table33_desc


ESR-200/ESR-100 light indication

...

The following table lists description of system indicator statuses and meanings.

Scroll Pagebreak


Table 60 – Status of system indicators

...

Indicator name

Indicator function

LED State

Device State

Power

Device power LED.

Green

Device power is normal operation state. Main power supply, if installed, is operational. The main software is uploaded.

Red

The main software is not loaded.

Off

Device internal power supply failure.

USB1, USB2



Indicators of operation of external USB devices.

Green

USB device is connected.

Flashes green

Read/write operation execution.

OffNo devices connected or connectivity issues.

...


Delivery package

WLC-15 standard delivery package includes:

...

  • ESR-14VF router;
  • Power cable;
  • 19” rack mounting kit;
  • Documentation (optional);
  • Technical passport.

Scroll Pagebreak
ESR-15 standard delivery package includes:

...

  • ESR-1000 router;
  • Console cable;
  • 19” rack mounting kit;
  • Documentation (optional);
  • Technical passport.

...

ESR-1200 standard delivery package includes:

...