...
Side panels of the device have air vents for heat removal. Do not block air vents. This may cause the components to overheat, which may result in device malfunction. For recommendations on device installation, see section Installation and connection.
Scroll Pagebreak
ESR-3100 design
ESR-3100 front panel
...
№ | Front panel element | Description |
|---|---|---|
1 | Status | Current device status LED. |
Alarm | Alarm LED. | |
VPN | VPN gateway operation mode LED. | |
Flash | Activity of exchange with data storage – SD card or USB Flash. | |
Power | Device power LED. | |
Master | Failover mode operation LED (is not supported in the current version). | |
Fan | Fan operation LED. | |
RPS | Redundant power supply LED. | |
2 | F | Functional key that reboots the device and resets it to factory default configuration:
|
3 | Console | Console port RS-232 (RJ-45) for local management of the device. |
4 | SD | SD-card connector. |
5 | USB1 | USB 3.0 port for USB device connection. |
6 | USB2 | USB 3.0 port for USB device connection. |
7 | [1 .. 8] | 8 ports of Gigabit Ethernet 10/100/1000BASE-T (RJ-45). |
8 | XG1 – XG8 | Slots for 10G SFP+/1G SFP transceivers. |
Scroll Pagebreak
ESR-3100 rear panel
The rear panel of ESR-3100 is depicted in the figure below.
...
Side panels of the device have air vents for heat removal. Do not block air vents. This may cause the components to overheat, which may result in device malfunction. For recommendations on device installation, see section Installation and connection.
Scroll Pagebreak
ESR-1700 design
ESR-1700 front panel
...
№ | Description |
|---|---|
1 | Main power supply. |
2 | Earth bonding point of the device. |
3 | Hot-swappable removable ventilation modules. |
4 | Place for installation of a redundant power supply. |
Scroll Pagebreak
ESR-1511, ESR-1500 side panels
...
№ | Front panel element | Description |
|---|---|---|
1 | SD | SD-card connector. |
2 | USB1 | Port for USB device connection. |
3 | USB2 | Port for USB device connection. |
4 | XG1, XG2 | Slots for 10G SFP+/1G SFP transceivers. |
5 | [1 .. 24] | 24 ports of Gigabit Ethernet 10/100/1000BASE-T (RJ-45). |
6 | Status | Current device status LED. |
Alarm | Alarm LED. | |
VPN | Active VPN sessions indicator. | |
Flash | Activity indicator of exchange with data storages (SD-card or USB Flash). | |
Power | Device power LED. | |
Master | Indicator of failover modes operation. | |
Fan | Fan operation LED. | |
RPS | Redundant power supply LED. | |
7 | F | Functional key that reboots the device and resets it to factory default configuration:
|
8 | Console | Console port RS-232 for local management of the device. |
Scroll Pagebreak
ESR-1200, 1000 rear panel
...
№ | Front panel element | Description |
|---|---|---|
1 | 110-250 VAC | Power supply. |
2 | Power | Device power LED. |
Status | Current device status LED. | |
Alarm | Alarm LED. | |
HA | HA operation mode LED (is not supported in the current version). | |
3 | F | Functional key that reboots the device and resets it to factory default configuration: - pressing the key for less than 10 seconds reboots the device. – pressing the key for more than 10 seconds resets the device to factory default configuration. |
4 | Console | Console port RS-232 (RJ-45) for local management of the device. |
5 | SD | SD-card connector. |
6 | USB1 | USB 2.0 connector for connecting external USB devices. |
7 | USB2 | USB 3.0 connector for connecting external USB devices. |
8 | 1, 2 | 2 ports of Gigabit Ethernet 10/100/1000BASE-T (RJ-45). |
9 | [1 .. 4] | 2 Combo ports of Ethernet 10/100/1000BASE-X/10/100/1000BASE-T. |
Scroll Pagebreak
ESR-20, ESR-30 rear panel
...
Table 35 lists LEDs located on ESR-15 top panel.Scroll Pagebreak
Table 35 – Description of front panel LEDs
...