...
№ | Front panel element | Description |
|---|---|---|
1 | Status | Current device status LED. |
Alarm | Alarm LED. | |
VPN | VPN gateway operation mode LED. | |
Flash | Activity of exchange with data storage – SD card or USB Flash. | |
Power | Device power LED. | |
Master | Failover mode operation LED (is not supported in the current version). | |
Fan | Fan operation LED. | |
RPS | Redundant power supply LED. | |
2 | F | Functional key that reboots the device and resets it to factory default configuration:
|
3 | Console | Console port RS-232 (RJ-45) for local management of the device. |
4 | SD | SD-card connector. |
5 | USB1 | USB 3.0 port for USB device connection. |
6 | USB2 | USB 3.0 port for USB device connection. |
7 | [1 .. 8] | 8 ports of Gigabit Ethernet 10/100/1000BASE-T (RJ-45). |
8 | XG1 – XG8 | Slots for 10G SFP+/1G SFP transceivers. |
Scroll Pagebreak
ESR-3100 rear panel
The rear panel of ESR-3100 is depicted in the figure below.
...
№ | Front panel element | Description |
|---|---|---|
1 | HDD1 | Connector for HDD installation. |
2 | HDD2 | Connector for HDD installation. |
3 | USB1 | Port for USB device connection. |
4 | USB2 | Port for USB device connection. |
5 | Combo Ports [1 .. 4] | 4 ports of Gigabit Ethernet 10/100/1000BASE-X (SFP). |
6 | XG1 – XG8 | Slots for 10G SFP+/1G SFP transceivers. |
7 | Status | Current device status LED. |
Alarm | Alarm LED. | |
VPN | VPN gateway operation mode LED (is not supported in the current version). | |
Flash | Activity of exchange with data storage – SD card or USB Flash. | |
Power | Device power LED. | |
Master | Failover mode operation LED (is not supported in the current version). | |
Fan | Fan operation LED. | |
RPS | Redundant power supply LED. | |
8 | F | Functional key that reboots the device and resets it to factory default configuration:
|
9 | Console | Console port RS-232 for local management of the device. |
10 | OOB | Ethernet port for router management. |
ESR-1700 rear panel
The rear panel of ESR-1700 is shown in the picture below.
...
Figure 23 – ESR-1700 right side panel
Scroll Pagebreak
Figure 24 – ESR-1700 left side panel
...
Table 30 lists rear panel connectors of the router.
Scroll Pagebreak
Table 30 – Rear panel connectors description
...
№ | Front panel element | Description |
|---|---|---|
1 | 110-250 VAC | Power supply. |
2 | Power | Device power LED. |
Status | Current device status LED. | |
Alarm | Alarm LED. | |
HA | HA operation mode LED (is not supported in the current version). | |
3 | F | Functional key that reboots the device and resets it to factory default configuration: - pressing the key for less than 10 seconds reboots the device. – pressing the key for more than 10 seconds resets the device to factory default configuration. |
4 | Console | Console port RS-232 (RJ-45) for local management of the device. |
5 | SD | SD-card connector. |
6 | USB1 | USB 2.0 connector for connecting external USB devices. |
7 | USB2 | USB 3.0 connector for connecting external USB devices. |
8 | 1, 2 | 2 ports of Gigabit Ethernet 10/100/1000BASE-T (RJ-45). |
9 | [1 .. 4] | 2 Combo ports of Ethernet 10/100/1000BASE-X/10/100/1000BASE-T. |
...
ESR-20, ESR-30 rear panel
...
Table 35 lists LEDs located on ESR-15 top panel.scroll-pagebreak
Table 35 – Description of front panel LEDs
...
№ | Side panel element | Description |
|---|---|---|
1 | F | Functional key that reboots the device and resets it to factory default configuration:
|
ESR-10 top panel
The top panel layout of ESR-10 is depicted in figure below.
...
№ | Top panel element | Description |
|---|---|---|
1 | Power | Device power and operation status LED. |
2 | - | The LED is not used. |
3 | USB1, USB2 | External USB devices LED. |
4 | [1 .. 4] | Ethernet ports LED. |
5 | [5 .. 6] | Optical interfaces LED. |
Light Indication
| Якорь | ||||
|---|---|---|---|---|
|
ESR-1700, ESR-1200, ESR-1000 light indication
...
Якорь table33_desc table33_desc
ESR-200/ESR-100 light indication
Gigabit Ethernet copper interface and SFP interface statuses are represented by two LEDs – green LINK/ACT LED and amber SPEED LED. Location of the copper interface LEDs is depicted in figure 62. SFP interface status is depicted in figure66. For light indication meaning, see Table 49.
...