Сравнение версий

Старая версия 14

changes.mady.by.user Городской Илья Сергеевич

Сохранено

по сравнению с

Новая версия 15

changes.mady.by.user Городской Илья Сергеевич

Сохранено

Ключ

  • Эта строка добавлена.
  • Эта строка удалена.
  • Изменено форматирование.

...

Шаг

Описание

Команда

Ключи

1Перейти в режим конфигурирования сетевого моста, который будет использован в качестве кластерного интерфейса.wlc(config)# bridge <BR-NUM><BR-NUM> – номер сетевого моста.
2Указать IPv4-адрес и маску подсети для кластерного интерфейса. Необходимо установить адрес для всех юнитов кластера. (Для работы кластерного интерфейса поддерживается только IPv4-адресация.)wlc(config-bridge)# ip address <ADDR/LEN> [unit <ID>]

<ADDR/LEN> – IP-адрес и длина маски подсети, задаётся в виде AAA.BBB.CCC.DDD/EE, где каждая часть AAA – DDD принимает значения [0..255] и EE принимает значения [1..32].

<ID> – номер юнита, принимает значения [1..2].

Дополнительные функции IPv4-адресации см. в разделе Настройка IP-адресации.

3Установить идентификатор VRRP-маршрутизатора.wlc(config-bridge)# vrrp id <VRID><VRID> – идентификатора VRRP-маршрутизатора, принимает значения [1..255].
4Установить виртуальный IP-адрес VRRP-маршрутизатора (адрес должен быть из той же подсети, что и ip address).wlc(config-bridgevrrp)# vrrp ip #ip <ADDR/LEN> LEN> [ secondary ]<ADDR/LEN> – виртуальный IP-адрес и длина маски, задаётся в виде AAA.BBB.CCC.DDD/EE, где каждая часть AAA – DDD принимает значения [0..255] и EE принимает значения [1..32]. Можно указать несколько
IP-адресов перечислением через запятую. Может быть назначено до 8  IP-адресов на интерфейс.
secondary – ключ для установки дополнительного IP-адреса.
5Установить принадлежность VRRP-маршрутизатора к группе. Группа предоставляет возможность синхронизировать несколько VRRP-процессов, так если в одном из процессов произойдет смена мастера, то в другом процессе также произойдёт смена ролей.wlc(config-bridgevrrp)# vrrp group # group <GRID><GRID> – идентификатор группы VRRP-маршрутизатора, принимает значения [1..32].
6Включить VRRP-процесс на IP-интерфейсе.wlc(config-bridgevrrp)# vrrpenable
7Активировать сетевой мост.wlc(config-bridge)# enable

8

Перейти в режим конфигурирования кластера.

wlc(config)# cluster


9Установить интерфейс, через который будет происходить обмен служебными сообщениями между юнитами в кластере.wlc(config-cluster)# cluster-interface bridge [<BRIDGE-ID>]

<BRIDGE-ID> – идентификационный номер моста, задается в виде, описанном в разделе Типы и порядок именования интерфейсов маршрутизатора.

10Отключить синхронизацию конфигураций в кластере между юнитами (не обязательно).wlc(config-cluster)# sync config disable
11Перейти в режим конфигурирования юнита в кластере.wlc(config-cluster)# unit <ID><ID> – номер юнита, принимает значения [1..4].
12Настроить MAC-адрес для определенного юнита.wlc(config-cluster-unit)# mac-address <ADDR>

<ADDR> – МАС-адрес сетевого моста, задаётся в виде XX:XX:XX:XX:XX:XX, где каждая часть принимает значения [00..FF].

13Включить работу кластера.wlc(config-cluster)# enable
14Сменить юнит у устройства (смена юнита устройства вступает в силу после перезагрузки.)wlc# set unit id <ID><ID> – номер юнита, принимает значения [1..4].

...

Блок кода
titleWLC-1
wlc-1(config-bridge)# vrrp id 2
wlc-1(config-bridgevrrp)# vrrp ip 192.168.1.1/32
wlc-1(config-bridgevrrp)# vrrp group 1
wlc-1(config-bridgevrrp)# enable  
wlc-1(config-vrrp)#  exit

Отключите работу spanning-tree и включите работу Bridge:

...

Блок кода
titleWLC-1
wlc-1(config-bridgevrrp)# vrrp id 1
wlc-1(config-bridgevrrp)# vrrp group 1
wlc-1(config-bridgevrrp)# vrrp ip 198.51.100.1/24
wlc-1(config-vrrp)# enable
wlc-1(config-vrrp)# exit
Примечание

Для настройки кластера адрес VRRP должен быть исключительно из той же подсети, что и адреса на интерфейсе.

Включите протокол VRRP и bridge:

Блок кода
titleWLC-1
wlc-1(config-bridge)# vrrp 
wlc-1(config-bridge)# enable
wlc-1(config-bridge)# exit

...

Раскрыть
Блок кода
cluster
  cluster-interface bridge 1
  unit 1
    mac-address e4:5a:d4:a0:be:35
  exit
  unit 2
    mac-address a8:f9:4b:af:35:84
  exit
  enable
exit

hostname wlc-1 
hostname wlc-1 unit 1
hostname wlc-2 unit 2

object-group service airtune
  port-range 8099
exit
object-group service dhcp_client
  port-range 68
exit
object-group service dhcp_server
  port-range 67
exit
object-group service dns
  port-range 53
exit
object-group service netconf
  port-range 830
exit
object-group service ntp
  port-range 123
exit
object-group service radius_auth
  port-range 1812
exit
object-group service sa
  port-range 8043-8044
exit
object-group service ssh
  port-range 22
exit
object-group service sync
  port-range 873
exit
object-group service journal_sync
  port-range 5432
exit

syslog max-files 3
syslog file-size 512
syslog file tmpsys:syslog/default
  severity info
exit

radius-server local
  nas ap
    key ascii-text password
    network 192.168.1.0/24
  exit
  nas local
    key ascii-text password
    network 127.0.0.1/32
  exit
  domain default
    user test
      password ascii-text password1
    exit
  exit
  virtual-server default
    enable
  exit
  enable
exit
radius-server host 127.0.0.1
  key ascii-text password
exit
aaa radius-profile default_radius
  radius-server host 127.0.0.1
exit

boot host auto-config
boot host auto-update

vlan 3
  force-up
exit
vlan 2449
  force-up
exit
vlan 2
exit

no spanning-tree

domain lookup enable

security zone trusted
exit
security zone untrusted
exit
security zone users
exit
security zone SYNC
exit

bridge 1
  vlan 1
  security-zone SYNC
  ip address 198.51.100.254/24 unit 1
  ip address 198.51.100.253/24 unit 2
  vrrp id 1
  vrrp  ip 198.51.100.1/24
   vrrp group 1
  vrrp  enable
  exit
  enable
exit
bridge 2
  vlan 2
  security-zone untrusted
  ip address dhcp
  no spanning-tree
  enable
exit
bridge 3
  vlan 3
  mtu 1458
  security-zone users
  ip address 192.168.2.1/24
  no spanning-tree
  enable
exit
bridge 5
  vlan 2449
  security-zone trusted
  ip address 192.168.1.3/24 unit 1
  ip address 192.168.1.2/24 unit 2
  vrrp id 2
  vrrp  ip 192.168.1.1/32
  vrrp  group 1
    vrrpenable
  exit 
  no spanning-tree
  enable
exit
interface gigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 1/0/2
  description "Local"
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 1/0/4
  mode switchport
exit
interface tengigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 1/0/2
  mode switchport
exit
interface gigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 2/0/2
  description "Local"
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 2/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 2/0/4
  mode switchport
exit
interface tengigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 2/0/2
  mode switchport
exit

tunnel softgre 1
  mode data
  local address 192.168.1.1
  default-profile
  enable
exit

security zone-pair trusted self
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group ssh
    enable
  exit
  rule 20
    action permit
    match protocol icmp
    enable
  exit
  rule 30
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group ntp
    enable
  exit
  rule 50
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 60
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
  rule 70
    action permit
    match protocol tcp
    match destination-port object-group netconf
    enable
  exit
  rule 80
    action permit
    match protocol tcp
    match destination-port object-group sa
    enable
  exit
  rule 90
    action permit
    match protocol udp
    match destination-port object-group radius_auth
    enable
  exit
  rule 100
    action permit
    match protocol gre
    enable
  exit
  rule 110
    action permit
    match protocol tcp
    match destination-port object-group airtune
    enable
  exit
exit
security zone-pair trusted trusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair trusted untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair untrusted self
  rule 1
    action permit
    match protocol udp
    match source-port object-group dhcp_server
    match destination-port object-group dhcp_client
    enable
  exit
exit
security zone-pair users self
  rule 10
    action permit
    match protocol icmp
    enable
  exit
  rule 20
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 30
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
exit
security zone-pair users untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair SYNC self
  rule 1
    action permit
    match protocol icmp
    enable
  exit
  rule 2
    action permit
    match protocol vrrp
    enable
  exit
  rule 3
    action permit
    match protocol ah
    enable
  exit
exit

security passwords default-expired

nat source
  ruleset factory
    to zone untrusted
    rule 10
      description "replace 'source ip' by outgoing interface ip address"
      action source-nat interface
      enable
    exit
  exit
exit

ip dhcp-server
ip dhcp-server pool ap-pool
  network 192.168.1.0/24
  address-range 192.168.1.4-192.168.1.254
  default-router 192.168.1.1
  dns-server 192.168.1.1
  option 42 ip-address 192.168.1.1
  vendor-specific
    suboption 12 ascii-text "192.168.1.1"
    suboption 15 ascii-text "https://192.168.1.1:8043"
  exit
exit
ip dhcp-server pool users-pool
  network 192.168.2.0/24
  address-range 192.168.2.4-192.168.2.254
  default-router 192.168.2.1
  dns-server 192.168.2.1
exit

softgre-controller
  nas-ip-address 127.0.0.1
  data-tunnel configuration wlc
  aaa radius-profile default_radius
  keepalive-disable
  service-vlan add 3
  enable
exit

wlc
  outside-address 192.168.1.1
  service-activator
    aps join auto
  exit
  airtune
    enable
  exit
  ap-location default-location
    description "default-location"
    mode tunnel
    ap-profile default-ap
    ssid-profile default-ssid
  exit
  ssid-profile default-ssid
    description "default-ssid"
    ssid "default-ssid"
    radius-profile default-radius
    vlan-id 3
    security-mode WPA2_1X
    802.11kv
    band 2g
    band 5g
    enable
  exit
  ap-profile default-ap
    password ascii-text password
  exit
  radius-profile default-radius
    auth-address 192.168.1.1
    auth-password ascii-text password
    domain default
  exit
  ip-pool default-ip-pool
    description "default-ip-pool"
    ap-location default-location
  exit
  enable
exit

ip ssh server

clock timezone gmt +7

ntp enable
ntp server 100.110.0.65
  minpoll 1
  maxpoll 4
exit

...

Блок кода
titleWLC-1
cluster
  cluster-interface bridge 1
  unit 1
    mac-address e4:5a:d4:a0:be:35
  exit
  unit 2
    mac-address a8:f9:4b:af:35:84
  exit
  enable
exit
 
hostname wlc-1
hostname wlc-1 unit 1
hostname wlc-2 unit 2
 
vlan 2449
 force-up
exit

security zone SYNC
exit
  
bridge 1
   vlan 1
  security-zone SYNC
  ip address 198.51.100.254/24 unit 1
  ip address 198.51.100.253/24 unit 2
  vrrp id 1
  vrrp  ip 198.51.100.1/24
  vrrp  group 1
    enable
   vrrpexit
  enable
exit
bridge 5
  vlan 2449
  security-zone trusted
  ip address 192.168.1.3/24 unit 1
  ip address 192.168.1.2/24 unit 2
  vrrp id 2
   vrrp ip 192.168.1.1/32
  vrrp  group 1
    vrrp enable
  exit 
  no spanning-tree
  enable
exit

interface gigabitethernet 1/0/2
  description "Local"
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 2/0/2
  description "Local"
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 2/0/3
  mode switchport
  spanning-tree disable
exit

security zone-pair SYNC self
  rule 1
    action permit
    match protocol icmp
    enable
  exit
  rule 2
    action permit
    match protocol vrrp
    enable
  exit
  rule 3
    action permit
    match protocol ah
    enable
  exit
exit

...

Блок кода
titleWLC-1
wlc-1(config-bridge)# vrrp id 3

Укажите виртуальный VRRP-адрес:

Блок кода
titleWLC-1
wlc-1(config-bridgevrrp)# vrrp ip 192.168.2.1/24

Укажите группу VRRP:

Блок кода
titleWLC-1
wlc-1(config-bridgevrrp)# vrrp group 1

Включить периодическую отправку Gratuituous ARP-сообщений, когда контроллер находится в состоянии Master:

Блок кода
titleWLC-1
wlc-1(config-bridgevrrp)# vrrp timers garp refresh 60

Включите работу VRRP:

Блок кода
titleWLC-1
wlc-1(config-bridgevrrp)# vrrp enable

Отключите работу spanning-tree:

...

Раскрыть
Блок кода
cluster
  cluster-interface bridge 1
  unit 1
    mac-address e4:5a:d4:a0:be:35
  exit
  unit 2
    mac-address a8:f9:4b:af:35:84
  exit
  enable
exit

hostname wlc-1 
hostname wlc-1 unit 1
hostname wlc-2 unit 2

object-group service airtune
  port-range 8099
exit
object-group service dhcp_client
  port-range 68
exit
object-group service dhcp_server
  port-range 67
exit
object-group service dns
  port-range 53
exit
object-group service netconf
  port-range 830
exit
object-group service ntp
  port-range 123
exit
object-group service radius_auth
  port-range 1812
exit
object-group service sa
  port-range 8043-8044
exit
object-group service ssh
  port-range 22
exit
object-group service sync
  port-range 873
exit
object-group service journal_sync
  port-range 5432
exit
object-group service softgre_controller
  port-range 1337
exit
object-group service FAILOVER
  port-range 9999
exit
object-group network SYNC_SRC
  ip address-range 198.51.100.254 unit 1
  ip address-range 198.51.100.253 unit 2
exit
object-group network SYNC_DST
  ip address-range 198.51.100.253 unit 1
  ip address-range 198.51.100.254 unit 2
exit

syslog max-files 3
syslog file-size 512
syslog file tmpsys:syslog/default
  severity info
exit

radius-server local
  nas ap
    key ascii-text password
    network 192.168.1.0/24
  exit
  nas local
    key ascii-text password
    network 127.0.0.1/32
  exit
  domain default
    user test
      password ascii-text password1
    exit
  exit
  virtual-server default
    enable
  exit
  enable
exit
radius-server host 127.0.0.1
  key ascii-text password
exit
aaa radius-profile default_radius
  radius-server host 127.0.0.1
exit

boot host auto-config
boot host auto-update

vlan 3
  force-up
exit
vlan 2449
  force-up
exit
vlan 2
exit

no spanning-tree

domain lookup enable

security zone trusted
exit
security zone untrusted
exit
security zone users
exit
security zone SYNC
exit

bridge 1
  vlan 1
  security-zone SYNC
  ip address 198.51.100.254/24 unit 1
  ip address 198.51.100.253/24 unit 2
  vrrp id1
 1
  vrrp ip 198.51.100.1/24
  vrrp  group 1
    enable
  vrrpexit
  enable
exit
bridge 2
  vlan 2
  security-zone untrusted
  ip address dhcp
  no spanning-tree
  enable
exit
bridge 3
  vlan 3
  mtu 1458
  security-zone users
  ip address 192.168.2.3/24 unit 1
  ip address 192.168.2.2/24 unit 2
  vrrp id 3
  vrrp  ip 192.168.2.1/32
  vrrp  group 1
  vrrp  timers garp refresh 60
  vrrp  enable
  no spanning-tree
  enable
exit
bridge 5
  vlan 2449
  security security-zone trusted
   ipip address 192.168.1.3/24 unit 1
  ip address 192.168.1.2/24 unit 2
  vrrp idvrrp 2
  vrrp  ip 192.168.1.1/32
  vrrp   group 1
  vrrp
  no    enable
  exit 
  no spanning-tree
  enable
exit
interface gigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 1/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 1/0/4
  mode switchport
exit
interface tengigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 1/0/2
  mode switchport
exit
interface gigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 2/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 2/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 2/0/4
  mode switchport
exit
interface tengigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 2/0/2
  mode switchport
exit

tunnel softgre 1
  mode data
  local address 192.168.1.1
  default-profile
  enable
exit

ip failover
  local-address object-group SYNC_SRC
  remote-address object-group SYNC_DST
  vrrp-group 1
exit

security zone-pair trusted self
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group ssh
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 12
    action permit
    match protocol tcp
    match destination-port object-group sync
    enable
  exit
  rule 20
    action permit
    match protocol icmp
    enable
  exit
  rule 30
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group ntp
    enable
  exit
  rule 50
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 60
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
  rule 70
    action permit
    match protocol tcp
    match destination-port object-group netconf
    enable
  exit
  rule 80
    action permit
    match protocol tcp
    match destination-port object-group sa
    enable
  exit
  rule 90
    action permit
    match protocol udp
    match destination-port object-group radius_auth
    enable
  exit
  rule 100
    action permit
    match protocol gre
    enable
  exit
  rule 110
    action permit
    match protocol tcp
    match destination-port object-group airtune
    enable
  exit
exit
security zone-pair trusted trusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair trusted untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair untrusted self
  rule 1
    action permit
    match protocol udp
    match source-port object-group dhcp_server
    match destination-port object-group dhcp_client
    enable
  exit
exit
security zone-pair users self
  rule 10
    action permit
    match protocol icmp
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 20
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 30
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
exit
security zone-pair users untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair SYNC self
  rule 1
    action permit
    match protocol icmp
    enable
  exit
  rule 2
    action permit
    match protocol vrrp
    enable
  exit
  rule 3
    action permit
    match protocol ah
    enable
  exit
  rule 4
    action permit
    match protocol tcp
    match destination-port object-group softgre_controller
    enable 
  exit
  rule 5
    action permit
    match protocol udp
    match destination-port object-group FAILOVER
    enable
  exit
exit
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group journal_sync
    enable
  exit
exit 

security passwords default-expired

nat source
  ruleset factory
    to zone untrusted
    rule 10
      description "replace 'source ip' by outgoing interface ip address"
      action source-nat interface
      enable
    exit
  exit
exit

ip dhcp-server
ip dhcp-server pool ap-pool
  network 192.168.1.0/24
  address-range 192.168.1.4-192.168.1.254
  default-router 192.168.1.1
  dns-server 192.168.1.1
  option 42 ip-address 192.168.1.1
  vendor-specific
    suboption 12 ascii-text "192.168.1.1"
    suboption 15 ascii-text "https://192.168.1.1:8043"
  exit
exit
ip dhcp-server pool users-pool
  network 192.168.2.0/24
  address-range 192.168.2.4-192.168.2.254
  default-router 192.168.2.1
  dns-server 192.168.2.1
exit
ip dhcp-server failover
  mode active-standby
  enable
exit

softgre-controller
  nas-ip-address 127.0.0.1
  failover
  data-tunnel configuration wlc
  aaa radius-profile default_radius
  keepalive-disable
  service-vlan add 3
  enable
exit

wlc
  outside-address 192.168.1.1
  service-activator
    aps join auto
  exit
  airtune
    enable
  exit
  failover
  ap-location default-location
    description "default-location"
    mode tunnel
    ap-profile default-ap
    ssid-profile default-ssid
  exit
  ssid-profile default-ssid
    description "default-ssid"
    ssid "default-ssid"
    radius-profile default-radius
    vlan-id 3
    security-mode WPA2_1X
    802.11kv
    band 2g
    band 5g
    enable
  exit
  ap-profile default-ap
    password ascii-text password
  exit
  radius-profile default-radius
    auth-address 192.168.1.1
    auth-password ascii-text password
    domain default
  exit
  ip-pool default-ip-pool
    description "default-ip-pool"
    ap-location default-location
  exit
  enable
exit

ip ssh server

clock timezone gmt +7

ntp enable
ntp server 100.110.0.65
  minpoll 1
  maxpoll 4
exit

crypto-sync
  remote-delete
  enable
exit

...

Блок кода
titleWLC-1
cluster
  cluster-interface bridge 1
  unit 1
    mac-address e4:5a:d4:a0:be:35
  exit
  unit 2
    mac-address a8:f9:4b:af:35:84
  exit
  unit 3
    mac-address 68:13:e2:7e:80:46
  exit
  enable
exit
 
hostname wlc-1 unit 1
hostname wlc-2 unit 2
hostname wlc-2 unit 3
 
vlan 2449
 force-up
exit

security zone SYNC
exit
  
bridge 1
   vlan 1
  security-zone SYNC
  ip address 198.51.100.254/24 unit 1
   ip address 198.51.100.253/24 unit 2
  ip address 198.51.100.252/24 unit 3
  vrrp id 1
  vrrp  ip 198.51.100.1/24
   vrrp group 1
    enable
   vrrpexit
  enable
exit
bridge 5
  vlan 2449
  security-zone trusted
  ip address 192.168.1.43/24 unit 1
  ip address 192.168.1.3/24 unit 2
  ip address 192.168.1.2/24 unit 32
  vrrp id 2
   vrrp ip 192.168.1.1/32
  vrrp  group 1
    vrrp enable
  exit 
  no spanning-tree
  enable
exit

interface gigabitethernet 1/0/2
  description "Local"
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 2/0/2
  description "Local"
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 2/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 3/0/2
  description "Local"
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 3/0/3
  mode switchport
  spanning-tree disable
exit

security zone-pair SYNC self
  rule 1
    action permit
    match protocol icmp
    enable
  exit
  rule 2
    action permit
    match protocol vrrp
    enable
  exit
  rule 3
    action permit
    match protocol ah
    enable
  exit
exit

...

Блок кода
titleWLC-1
wlc-1(config-bridge)# vrrp id 3

Укажите виртуальный VRRP-адрес:

Блок кода
titleWLC-1
wlc-1(config-bridgevrrp)# vrrp ip 192.168.2.1/24

Укажите группу VRRP:

Блок кода
titleWLC-1
wlc-1(config-bridgevrrp)# vrrp group 1

Включить периодическую отправку Gratuituous ARP-сообщений, когда контроллер находится в состоянии Master:

Блок кода
titleWLC-1
wlc-1(config-bridgevrrp)# vrrp timers garp refresh 60

Включите работу VRRP:

Блок кода
titleWLC-1
wlc-1(config-bridgevrrp)# vrrpenable

Отключите работу spanning-tree:

...

Раскрыть
Блок кода
cluster
  cluster-interface bridge 1
  unit 1
    mac-address e4:5a:d4:a0:be:35
  exit
  unit 2
    mac-address a8:f9:4b:af:35:84
  exit
  unit 3
    mac-address 68:13:e2:7e:80:46 
  exit 
  enable
exit

hostname wlc-1 
hostname wlc-1 unit 1
hostname wlc-2 unit 2
hostname wlc-3 unit 3

object-group service airtune
  port-range 8099
exit
object-group service dhcp_client
  port-range 68
exit
object-group service dhcp_server
  port-range 67
exit
object-group service dns
  port-range 53
exit
object-group service netconf
  port-range 830
exit
object-group service ntp
  port-range 123
exit
object-group service radius_auth
  port-range 1812
exit
object-group service sa
  port-range 8043-8044
exit
object-group service ssh
  port-range 22
exit
object-group service sync
  port-range 873
exit
object-group service journal_sync
  port-range 5432
exit
object-group service softgre_controller
  port-range 1337
exit
object-group service FAILOVER
  port-range 9999
exit
object-group network SYNC_SRC
  ip address-range 198.51.100.254 unit 1
  ip address-range 198.51.100.253 unit 2
  ip address-range 198.51.100.252 unit 3
exit
object-group network SYNC_DST
  ip address-range 198.51.100.253 unit 1
  ip address-range 198.51.100.252 unit 1
  ip address-range 198.51.100.254 unit 2
  ip address-range 198.51.100.252 unit 2
  ip address-range 198.51.100.253 unit 3
  ip address-range 198.51.100.254 unit 3
exit

syslog max-files 3
syslog file-size 512
syslog file tmpsys:syslog/default
  severity info
exit

radius-server local
  nas ap
    key ascii-text password
    network 192.168.1.0/24
  exit
  nas local
    key ascii-text password
    network 127.0.0.1/32
  exit
  domain default
    user test
      password ascii-text password1
    exit
  exit
  virtual-server default
    enable
  exit
  enable
exit
radius-server host 127.0.0.1
  key ascii-text password
exit
aaa radius-profile default_radius
  radius-server host 127.0.0.1
exit

boot host auto-config
boot host auto-update

vlan 3
  force-up
exit
vlan 2449
  force-up
exit
vlan 2
exit

no spanning-tree

domain lookup enable

security zone trusted
exit
security zone untrusted
exit
security zone users
exit
security zone SYNC
exit

bridge 1
  vlan 1
  security-zone SYNC
  ip address 198.51.100.254/24 unit 1
  ip address 198.51.100.253/24 unit 2
  ip address 198.51.100.252/24 unit 3
  vrrp id 1
  vrrp  ip 198.51.100.1/24
  vrrp  group 1
    vrrpenable
  exit
  enable
exit
bridge 2
  vlan 2
  security-zone untrusted
  ip address dhcp
  no spanning-tree
  enable
exit
bridge 3
  vlan 3
  mtu 1458
  security-zone users
   ip address 192.168.2.43/24 unit 1
  ip ip address 192.168.2.32/24 unit 2
  ip address 192.168.2.2/24 unit 3
  vrrp id 3
   vrrp ip 192.168.2.1/32
   vrrp group 1
   vrrp timers garp refresh 60
   vrrp enable
  no spanning-tree
  enable
exit
bridge 5
  vlan 2449
  security security-zone trusted
  ip address 192.168.1.43/24 unit 1
  ip address 192.168.1.32/24 unit 2
  ip address 192.168.1.2/24 unit 3
  vrrp id 2
  vrrpvrrp 2
    ip 192.168.1.1/32
  vrrp   group 1
  vrrp
  no   enable
  exit 
  no spanning-tree
  enable
exit
interface gigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 1/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 1/0/4
  mode switchport
exit
interface tengigabitethernet 1/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 1/0/2
  mode switchport
exit
interface gigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 2/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 2/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 2/0/4
  mode switchport
exit
interface tengigabitethernet 2/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 2/0/2
  mode switchport
exit
interface gigabitethernet 3/0/1
  mode switchport
  switchport access vlan 2
exit
interface gigabitethernet 3/0/2
  mode switchport
  switchport mode trunk
  switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 3/0/3
  mode switchport
  spanning-tree disable
exit
interface gigabitethernet 3/0/4
  mode switchport
exit
interface tengigabitethernet 3/0/1
  mode switchport
  switchport access vlan 2
exit
interface tengigabitethernet 3/0/2
  mode switchport
exit

tunnel softgre 1
  mode data
  local address 192.168.1.1
  default-profile
  enable
exit

ip failover
  local-address object-group SYNC_SRC
  remote-address object-group SYNC_DST
  vrrp-group 1
exit

security zone-pair trusted self
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group ssh
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 12
    action permit
    match protocol tcp
    match destination-port object-group sync
    enable
  exit
  rule 20
    action permit
    match protocol icmp
    enable
  exit
  rule 30
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group ntp
    enable
  exit
  rule 50
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 60
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
  rule 70
    action permit
    match protocol tcp
    match destination-port object-group netconf
    enable
  exit
  rule 80
    action permit
    match protocol tcp
    match destination-port object-group sa
    enable
  exit
  rule 90
    action permit
    match protocol udp
    match destination-port object-group radius_auth
    enable
  exit
  rule 100
    action permit
    match protocol gre
    enable
  exit
  rule 110
    action permit
    match protocol tcp
    match destination-port object-group airtune
    enable
  exit
exit
security zone-pair trusted trusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair trusted untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair untrusted self
  rule 1
    action permit
    match protocol udp
    match source-port object-group dhcp_server
    match destination-port object-group dhcp_client
    enable
  exit
exit
security zone-pair users self
  rule 10
    action permit
    match protocol icmp
    enable
  exit
  rule 11
    action permit
    match protocol vrrp
    enable
  exit
  rule 20
    action permit
    match protocol udp
    match source-port object-group dhcp_client
    match destination-port object-group dhcp_server
    enable
  exit
  rule 30
    action permit
    match protocol tcp
    match destination-port object-group dns
    enable
  exit
  rule 40
    action permit
    match protocol udp
    match destination-port object-group dns
    enable
  exit
exit
security zone-pair users untrusted
  rule 1
    action permit
    enable
  exit
exit
security zone-pair SYNC self
  rule 1
    action permit
    match protocol icmp
    enable
  exit
  rule 2
    action permit
    match protocol vrrp
    enable
  exit
  rule 3
    action permit
    match protocol ah
    enable
  exit
  rule 4
    action permit
    match protocol tcp
    match destination-port object-group softgre_controller
    enable 
  exit
  rule 5
    action permit
    match protocol udp
    match destination-port object-group FAILOVER
    enable
  exit
exit
  rule 10
    action permit
    match protocol tcp
    match destination-port object-group journal_sync
    enable
  exit
exit 

security passwords default-expired

nat source
  ruleset factory
    to zone untrusted
    rule 10
      description "replace 'source ip' by outgoing interface ip address"
      action source-nat interface
      enable
    exit
  exit
exit

ip dhcp-server
ip dhcp-server pool ap-pool
  network 192.168.1.0/24
  address-range 192.168.1.4-192.168.1.254
  default-router 192.168.1.1
  dns-server 192.168.1.1
  option 42 ip-address 192.168.1.1
  vendor-specific
    suboption 12 ascii-text "192.168.1.1"
    suboption 15 ascii-text "https://192.168.1.1:8043"
  exit
exit
ip dhcp-server pool users-pool
  network 192.168.2.0/24
  address-range 192.168.2.4-192.168.2.254
  default-router 192.168.2.1
  dns-server 192.168.2.1
exit
ip dhcp-server failover
  mode active-standby
  enable
exit

softgre-controller
  nas-ip-address 127.0.0.1
  failover
  data-tunnel configuration wlc
  aaa radius-profile default_radius
  keepalive-disable
  service-vlan add 3
  enable
exit

wlc
  outside-address 192.168.1.1
  service-activator
    aps join auto
  exit
  airtune
    enable
  exit
  failover
  ap-location default-location
    description "default-location"
    mode tunnel
    ap-profile default-ap
    ssid-profile default-ssid
  exit
  ssid-profile default-ssid
    description "default-ssid"
    ssid "default-ssid"
    radius-profile default-radius
    vlan-id 3
    security-mode WPA2_1X
    802.11kv
    band 2g
    band 5g
    enable
  exit
  ap-profile default-ap
    password ascii-text password
  exit
  radius-profile default-radius
    auth-address 192.168.1.1
    auth-password ascii-text password
    domain default
  exit
  ip-pool default-ip-pool
    description "default-ip-pool"
    ap-location default-location
  exit
  enable
exit

ip ssh server

clock timezone gmt +7

ntp enable
ntp server 100.110.0.65
  minpoll 1
  maxpoll 4
exit

crypto-sync
  remote-delete
  enable
exit

...