%CFG_MGR-I-AUTOUPDATE: start with firmware file '198.51.100.1:/esr.firmware'
%FILE_MGR-I-INFO: operation started: 'copy tftp://198.51.100.1:/esr.firmware system:firmware' (index: 1, origin: Cfgsync-mgr)
%CFG_MGR-I-AUTOCONFIG: start with configuration file '198.51.100.1:/esr-ztp-config.txt'
%FIRMWARE-I-INFO: Verify firmware...
%FIRMWARE-I-INFO: Firmware version: 1.37.4 build 2[4b06f2c798] 2025-12-03 14:23:46
%FIRMWARE-I-INFO: Check firmware version...
%FILE_MGR-I-INFO: operation is finished: 'copy tftp://198.51.100.1:/esr.firmware system:firmware' (index: 1, origin: Cfgsync-mgr)
%CFG_MGR-I-AUTOUPDATE: firmware file loaded (Firmware is same version.)
%CFG_MGR-I-AUTOUPDATE: loaded firmware have older or same version, nothing to update
%FILE_MGR-I-INFO: operation started: 'copy tftp://198.51.100.1:/esr-ztp-config.txt system:candidate-config' (index: 2, origin: Cfgsync-mgr)
%FILE_MGR-I-INFO: operation is finished: 'copy tftp://198.51.100.1:/esr-ztp-config.txt system:candidate-config' (index: 2, origin: Cfgsync-mgr)
%CFG_MGR-I-AUTOCONFIG: configuration file loaded succesfully
%SYS-W-EVENT: WARNING!!! the device can be accessed using the admin user with the default password
%SYS-W-EVENT: WARNING!!! 'boot host auto-config' will be disabled after reboot hardware
%SYS-W-EVENT: WARNING!!! 'boot host auto-update' will be disabled after reboot hardware
%LINK-W-DOWN: bridge 1 changed state to down
%CFG_MGR-I-AUTOCONFIG: completed successfully

%SYS-W-EVENT: The configuration has been loaded from '/media/usb/FAT32/startup-config.conf' path successfully