История страницы

ssh admin@localhost -p 8023

To use the media resource and establish connections, it is necessary to activate it in the media resource creation command: /system/media/resource/declare (parameter "is active"=true) or /system/media/resource/set (parameter "active"=true), if activation was not performed during creation. Activation can also be performed through the web interface, application - MSR network terminations (MSR-registrars).

declare

The command to declare a media server connection to ECSS-10.

To operate in preconfigured mode, one can pre-register media resources with known information.

To do this, it is necessary to create a description of known media servers with all parameters specified, allowing to start working with the media server immediately after its registration.

The command to create a media server configuration:

Command path:

/system/media/resource/declare

Syntax:

declare <node> by_contact <contact> <zone> <site> <is active>

or

declare <node> by_iface <msr> <acc_id> <iface> <zone> <site> <is active>

Parameters:

<node> — core node name;

<contact> — contact uri of the declared media resource;

<zone> — logical service zone of the MSR;

<site> — MSR service network identifier;

<is active> — media resource activity status, true/false values;

<msr> — MSR name;

<acc_id> — resource identifier number;

<iface> — interface name.

set

A command for changing media resource settings.

Command path:

/system/media/resource/set

Syntax:

set <node|*> <contact> <active|zone|site> <value>

Parameters:

<node|*> — node name;
<contact> — contact uri of the declared media resource;
<active|zone|site> — activation | zone | site;
<value> — parameter value.

/system/media/resource/declare core1@ecss1 contact net.20@msr.ecss1 default local true

/system/media/resource/declare core1@ecss1 contact net.20@msr.ecss1 default local true
  Declared media resources
┌─────────────┬───────────────────────┬────────┬─────────┬───────┐
│    Node     │        Contact        │ Active │   Zone  │  Site │
├─────────────┼───────────────────────┼────────┼─────────┼───────┤
│ core1@ecss1 │ net.20@msr.ecss1      │ true   │ default │ local │
└─────────────┴───────────────────────┴────────┴─────────┴───────┘

info

A command for viewing connection status information for a specific media resource.

Command path:

/system/media/resource/info

Syntax:

info <node>  <contact>

Parameters:

<contact> — contact uri of the declared media resource;
<node> — node name.

/system/media/resource/info core1@ecss1 net.20@msr.ecss1
  Media resource specific for node core1@ecss1:
┌─┬─────────────────┬─────────────────────┐
│F│    Parameter    │        Value        │
├─┼─────────────────┼─────────────────────┤
│r│ Contact         │ net.20@msr.ecss1    │
│r│ Status          │ registered          │
│r│ Cc-status       │ connected           │
│r│ Cc-status uptime│ 00:16:48            │
│r│ Cc-id           │ cb6599              │
│r│ Address         │ 10.0.20.41:5700     │
│r│ Register time   │ 2025/12/03 09:40:25 │
│r│ Expired         │ 131                 │
│r│ Iface           │ net.20(10.0.20.41)  │
│ │ Active          │ true                │
│ │ Zone            │ default             │
│ │ Site            │ local               │
│r│ MSR version     │ 3.18.1.0.12         │
│r│ MSR load        │ 0                   │
│r│ MSR perf coef   │ 1.0                 │
└─┴─────────────────┴─────────────────────┘
Legend:
Column F - means Flag, values r - flag for readonly parameter

list
A command for viewing a list of media resources in the ECSS-10 system.

Command path:

/system/media/resource/list

Syntax:

list [active | all | register]

Parameters:

active — display only active media resources (default);
register — display only registered media resources;
short — display minimal information;
all — display all declared media resources.

By default, the command displays a list of registered media servers.

/system/media/resource/list all                      
  All media resource selected list specific:
┌─────────────┬───────────┬──────────────┬───────────┬──────┬────────┬───────────┬───────────┬─────────────────┬────────┬────────────┬────────┬─────────┬───────┬──────────────────┬────────────┬─────────┐
│    Node     │    MSR    │     MSR      │    MSR    │ MSR  │ Cc-id  │ Cc-status │ Cc-uptime │   Cc-address    │ Iface  │   Iface    │ Active │  Zone   │ Site  │     Contact      │   Status   │ Expired │
│             │           │   version    │ perf coef │ load │        │           │           │                 │  name  │    addr    │        │         │       │                  │            │         │
├─────────────┼───────────┼──────────────┼───────────┼──────┼────────┼───────────┼───────────┼─────────────────┼────────┼────────────┼────────┼─────────┼───────┼──────────────────┼────────────┼─────────┤
│ core1@ecss1 │ msr.ecss1 │ 3.18.1.0.12  │       1.0 │    0 │ 54faa9 │ connected │ 00:54:48  │ 10.0.20.41:5700 │ net.20 │ 10.0.20.41 │ true   │ default │ local │ net.20@msr.ecss1 │ registered │     129 │
└─────────────┴───────────┴──────────────┴───────────┴──────┴────────┴───────────┴───────────┴─────────────────┴────────┴────────────┴────────┴─────────┴───────┴──────────────────┴────────────┴─────────┘

set

A command for changing common and individual parameters.

Command path:

/system/media/registrar/set

Syntax for setting common parameters:

set common <FIELD> <VALUE>

Parameters:

<FIELD> — name of the parameter being configured;

<VALUE> — value of the parameter being configured

Where:

• common — the type of parameter being set;
• <common parameter> — a common media registrar parameter for all nodes: registration-timeout;
• private — the type of parameter being set;
• <node name> — the name of the node on which the media registrarresides;
• <private parameter> — a media registrar parameter that is set on <node name>: is-active, listen-interface, and listen-port.

List of parameters available for configuration:

• is-active — enables or disables the registrar (false - deactivates the registrar, the registrar stops receiving SIP traffic);

• listen-interface — the name of the interface the registrar uses;

• listen-port — the port on which the registrar accepts registration requests (default 5000);

• registration-timeout — re-registration timer, range from 60 to 86400.

In the general settings you can set the registration time; by default it is 60 seconds.

Example:
Set the registration time to 60 seconds:

/system/media/registrar/set common registration-timeout 60
Common parameter registration-timeout set to 60.

Syntax for configuring individual parameters:

system/media/registrar/set private <CORE> <FIELD> <VALUE>

Parameters:

<CORE> — the core node for which the Registrar server is being configured;

<FIELD> — the name of the configurable parameter;

<VALUE> — the value of the configurable parameter.

Configurable parameters:

• is-active — whether the Registrar server is active, true | false;
• listen-ip — the IP address on which the Registrar server will accept connections (default 0.0.0.0);
• listen-port — the network port on which the Registrar server will accept connections (default 5000).

/system/media/registrar/set private core1@ecss1 listen-ip 10.0.20.41

/system/media/registrar/set private core1@ecss1 listen-ip 10.0.20.41   
Private parameter listen-ip set to 10.0.20.41 at node core1@ecss1.

info

Command for viewing the current Registrar server settings.

Command path:

/system/media/registrar/info

/system/media/registrar/info
 Common parameters:
┌───────────────────────────┬───────┐
│         Parameter         │ Value │
├───────────────────────────┼───────┤
│ registration-timeout, sec │   180 │
└───────────────────────────┴───────┘
 Private parameters:
┌─────────────┬─────────┬───────────┬────────────┬─────────────┐
│    Node     │ Status  │ Is-active │ Listen-ip  │ Listen-port │
├─────────────┼─────────┼───────────┼────────────┼─────────────┤
│ core1@ecss1 │ active  │ true      │ 10.0.20.41 │        5000 │
└─────────────┴─────────┴───────────┴────────────┴─────────────┘

It is also possible to add media resources through the web configurator application — MSR-registrars.

/system-status   
Checking...
┌─┬───────────────┬───────────────────────────┬────────────────┬──────────────┬──────┐
│ │     Node      │          Release          │  Erlang nodes  │ Mnesia nodes │Uptime│
├─┼───────────────┼───────────────────────────┼────────────────┼──────────────┼──────┤
│ │core1@ecss1    │ecss-core-3.18.1.0.1657    │core1@ecss1     │not running   │1h 23m│
│ │ds1@ecss1      │ecss-ds-3.18.1.0.1657      │ds1@ecss1       │ds1@ecss1     │1h 23m│
│ │md1@ecss1      │ecss-mediator-3.18.1.0.1657│md1@ecss1       │md1@ecss1     │1h 23m│
│ │mycelium1@ecss1│ecss-mycelium-3.18.1.0.1657│mycelium1@ecss1 │not running   │1h 23m│
│ │sip1@ecss1     │ecss-pa-sip-3.18.1.0.1657  │sip1@ecss1      │sip1@ecss1    │1h 23m│
└─┴───────────────┴───────────────────────────┴────────────────┴──────────────┴──────┘

All services are started.

  Active media resource selected list specific:
┌─────────────┬───────────┬──────────────┬───────────┬───────────┐
│    Node     │    MSR    │     MSR      │ Cc-status │ Cc-uptime │
│             │           │   version    │           │           │
├─────────────┼───────────┼──────────────┼───────────┼───────────┤
│ core1@ecss1 │ msr.ecss1 │ 3.18.1.0.12  │ connected │ 00:04:15  │
└─────────────┴───────────┴──────────────┴───────────┴───────────┘

/cluster/adapter/sip1/sip/network/set ip_set test_set node-ip node = sip1@ecss1 ip = 10.0.20.41

/cluster/adapter/sip1/sip/network/set ip_set test_set listen-ports list = [5060]

/cluster/adapter/sip1/sip/network/set ip_set test_set node-ip node = sip1@ecss1 ip = 10.0.20.41
        
Property "ip_set" successfully changed from: 
    
        to
test_set: no ports set
test_set: sip1@ecss1 10.0.20.41
test_set: dscp 0.

/cluster/adapter/sip1/sip/network/set ip_set test_set listen-ports list = [5060]
Property "ip_set" successfully changed from:
test_set: no ports set
test_set: sip1@ecss1 10.0.20.41
test_set: dscp 0
        to
test_set: 5060
test_set: sip1@ecss1 10.0.20.41
test_set: dscp 0

/domain/declare test_domain --add-domain-admin-privileges --add-domain-user-privileges

/domain/test_domain/sip/network/set ip_set [test_set]

/domain/declare test_domain --add-domain-admin-privileges --add-domain-user-privileges
New domain test_domain is declared


/domain/test_domain/sip/network/set ip_set [test_set]
Property "ip_set" successfully changed from: 
[]
   to
["test_set"].

/cluster/storage/ds1/ss/access-list add test_domain *

/cluster/storage/ds1/ss/access-list add test_domain *
Supplementary services successfully added in the domain test_domain.

/domain/test_domain/ss/licence/politics/declare new_sub "Set when creating a subscriber"

/domain/test_domain/ss/licence/politics/declare new_sub "Set when creating a subscriber"
Licence politic new_sub successfully declared.

/cluster/storage/ds1/licence/show-licence 1

/cluster/storage/ds1/licence/show-licence 1
SSW ID                                                < Name SSW ID >
Description                                           ECSS ELM License

. . .  

Supplementary Services licence package(s)             
 name                                                 'ECSS-ADV'
 limit                                                600000
 description                                          "The whole package of services"
 SS list                                              [1,2,3,4,5]
                                                      
. . .  

/domain/test_domain/ss/licence/politics/package-add new_sub ECSS-ADV 

/domain/test_domain/ss/licence/politics/package-add new_sub ECSS-ADV 
Licence packages ["ECSS-ADV"] successfully added to politic new_sub.

/domain/test_domain/ss/licence/politics/activate new_sub

/domain/test_domain/ss/licence/politics/activate new_sub
Licence politic new_sub successfully activated.