...
| Блок кода | ||
|---|---|---|
| ||
#Configure interfaces for uplink: wlc(config)# interface gigabitethernet 1/0/1 wlc(config-if-gi)# mode switchport wlc(config-if-gi)# switchport access vlan 2 wlc(config-if-gi)# exit wlc(config)# interface tengigabitethernet 1/0/1 wlc(config-if-te)# mode switchport wlc(config-if-te)# switchport access vlan 2 wlc(config-if-te)# exit #COnfigure#Configure interfaces for access points connection: wlc(config)# interface gigabitethernet 1/0/2 wlc(config-if-gi)# mode switchport wlc(config-if-gi)# exit wlc(config)# interface gigabitethernet 1/0/3 wlc(config-if-gi)# mode switchport wlc(config-if-gi)# exit wlc(config)# interface gigabitethernet 1/0/4 wlc(config-if-gi)# mode switchport wlc(config-if-gi)# exit wlc(config)# interface tengigabitethernet 1/0/2 wlc(config-if-te)# mode switchport wlc(config-if-te)# exit |
...
| Блок кода | ||
|---|---|---|
| ||
#Create airtune profile, by default, it already contains the optimal service settings, so it is needed only to create the profile itself: wlc# configure wlc(config)# wlc wlc(config-wlc)# airtune-profile default_airtune wlc(config-airtune-profile)#exit #Add a profile to a location to allow optimization in the selected location: wlc(config-wlc)# wlc(config-wlc)# ap-location default-location wlc(config-wlc-ap-location)# airtune-profile default_airtune wlc(config-wlc-ap-location)#exit #Globally activate airtune functionality in the controller (optimization will only take place in locations with airtune profile): wlc(config-wlc)# airtune wlc(config-airtune)# enable wlc(config-wlc)# end wlc# commit wlc# confirm |
| Scroll Pagebreak |
|---|