...
Configuration example of WLC-2
Подключаемся к WLC и переходим в режим конфигурирования: Connect to the WLC and enter configuration mode:
Меняем имя устройстваChange the name:
Создаем Create vlan 2449:
Блок кода |
---|
vlan 2449
force-up
exit |
Настраиваем интерфейс Configure gi 1/0/2 для приема тегированного трафика в interface to accept tagged traffic on VLAN 3 и and 2449:
Блок кода |
---|
interface gigabitethernet 1/0/2
mode switchport
switchport mode trunk
switchport trunk allowed vlan add 3,2449
exit |
Создаем Create object-group для настройки for Firewall configuration:
Блок кода |
---|
object-group service sync
port-range 873
exit
object-group service softgre_controller
port-range 1337
exit |
Меняем адресацию и настраиваем VRRP на Change the addressing and configure VRRP on the Bridge: Блок кода |
---|
no bridge 1
no bridge 3
bridge 1
vlan 2449
security-zone trusted
ip address 192.168.1.3/24
vrrp priority 110
vrrp id 1
vrrp ip 192.168.1.1/32
vrrp group 1
vrrp preempt disable
vrrp timers garp refresh 60
vrrp
no spanning-tree
enable
exit
bridge 3
vlan 3
mtu 1458
security-zone users
ip address 192.168.2.3/24
vrrp priority 110
vrrp id 3
vrrp ip 192.168.2.1/32
vrrp group 1
vrrp preempt disable
vrrp timers garp refresh 60
vrrp
no spanning-tree
enable
exit
|
Настраиваем Configure Crypto-Sync для синхронизации сертификатовfor certificate synchronization:
Блок кода |
---|
crypto-sync
local-address 192.168.1.3
remote-address 192.168.1.2
vrrp-group 1
remote-delete
enable
exit |
Настраиваем Configure Softgre-Controller для синхронизации туннелей for SoftGRE tunnels synchronization:
Блок кода |
---|
softgre-controller
peer-address 192.168.1.2
vrrp-group 1
exit |
Настраиваем Softgre-туннель для синхронизации, в качестве local address указывается адрес Configure softgre-tunnel for synchronization, vrrp-ip address is specified as local address: Блок кода |
---|
tunnel softgre 1
mode data
local address 192.168.1.1
default-profile
enable
exit |
Настраиваем WLC для синхронизации точек доступаConfigure WLC for AP synchronization:
Блок кода |
---|
wlc
failover
local-address 192.168.1.3
remote-address 192.168.1.2
vrrp-group 1
enable
exit
exit |
Настраиваем правила Configure Firewall rules, разрешаем протокол VRRP и порты для синхронизации туннелей и сертификатовallow VRRP protocol and ports for tunnel and certificate synchronization:
Блок кода |
---|
security zone-pair trusted self
rule 11
action permit
match protocol vrrp
enable
exit
rule 12
action permit
match protocol tcp
match destination-port softgre_controller
enable
exit
rule 13
action permit
match protocol tcp
match destination-port sync
enable
exit
exit
security zone-pair users self
rule 11
action permit
match protocol vrrp
enable
exit
exit |
Настраиваем Configure DHCP -серверserver: Блок кода |
---|
no ip dhcp-server pool users-pool
no ip dhcp-server pool ap-pool
ip dhcp-server pool ap-pool
network 192.168.1.0/24
address-range 192.168.1.4-192.168.1.254
default-router 192.168.1.1
dns-server 192.168.1.1
option 42 ip-address 192.168.1.1
vendor-specific
suboption 12 ascii-text "192.168.1.1"
suboption 15 ascii-text "https://192.168.1.1:8043"
exit
exit
ip dhcp-server pool users-pool
network 192.168.2.0/24
address-range 192.168.2.4-192.168.2.254
default-router 192.168.2.1
dns-server 192.168.2.1
exit |
Настраиваем Configure DHCP Failover:
Блок кода |
---|
ip dhcp-server failover
mode active-standby
local-address 192.168.1.3
remote-address 192.168.1.2
vrrp-group 1
enable
exit |
Создаем пользователя в локальном Radius-сервереCreate a user in local Radius server:
Блок кода |
---|
radius-server local
domain default
user test
password ascii-text 12345678
exit
exit
exit |
Применяем и подтверждаем конфигурациюCommit and confirm the configuration:
Блок кода |
---|
wlc-2# commit
wlc-2# confirm |
...
Раскрыть |
---|
Блок кода |
---|
#!/usr/bin/clish
#193
#1.19.2
#22/12/2023
#18:22:05
hostname WLC-2
object-group service airtune
port-range 8099
exit
object-group service dhcp_client
port-range 68
exit
object-group service dhcp_server
port-range 67
exit
object-group service dns
port-range 53
exit
object-group service netconf
port-range 830
exit
object-group service ntp
port-range 123
exit
object-group service radius_auth
port-range 1812
exit
object-group service sa
port-range 8043-8044
exit
object-group service ssh
port-range 22
exit
object-group service sync
port-range 873
exit
object-group service softgre_controller
port-range 1337
exit
syslog max-files 3
syslog file-size 512
syslog file tmpsys:syslog/default
severity info
exit
radius-server local
nas ap
key ascii-text encrypted 8CB5107EA7005AFF
network 192.168.1.0/24
exit
nas local
key ascii-text encrypted 8CB5107EA7005AFF
network 127.0.0.1/32
exit
domain default
user test
password ascii-text encrypted CDE65039E5591FA3
exit
exit
virtual-server default
enable
exit
enable
exit
username admin
password encrypted $6$gnFubZbxiPHa/WdA$xEmrfe/dVeVNDGBztQUB1Sk8In.20Hep/LxMJhxcHFWCfs2SPwxaCyyNxmzL3Bqu8buj71PPfp7WdfWz8AqrU/
exit
radius-server host 127.0.0.1
key ascii-text encrypted 8CB5107EA7005AFF
exit
aaa radius-profile default_radius
radius-server host 127.0.0.1
exit
boot host auto-config
boot host auto-update
vlan 3
force-up
exit
vlan 2449
force-up
exit
vlan 2
exit
no spanning-tree
domain lookup enable
security zone trusted
exit
security zone untrusted
exit
security zone users
exit
bridge 1
vlan 2449
security-zone trusted
ip address 192.168.1.3/24
vrrp id 1
vrrp ip 192.168.1.1/32
vrrp priority 110
vrrp group 1
vrrp preempt disable
vrrp timers garp refresh 60
vrrp
no spanning-tree
enable
exit
bridge 2
vlan 2
security-zone untrusted
ip address dhcp
no spanning-tree
enable
exit
bridge 3
vlan 3
mtu 1458
security-zone users
ip address 192.168.2.3/24
vrrp id 3
vrrp ip 192.168.2.1/32
vrrp priority 110
vrrp group 1
vrrp preempt disable
vrrp timers garp refresh 60
vrrp
no spanning-tree
enable
exit
interface gigabitethernet 1/0/1
mode switchport
switchport access vlan 2
exit
interface gigabitethernet 1/0/2
mode switchport
switchport mode trunk
switchport trunk allowed vlan add 3,2449
exit
interface gigabitethernet 1/0/3
mode switchport
exit
interface gigabitethernet 1/0/4
mode switchport
exit
interface tengigabitethernet 1/0/1
mode switchport
switchport access vlan 2
exit
interface tengigabitethernet 1/0/2
mode switchport
exit
tunnel softgre 1
mode data
local address 192.168.1.1
default-profile
enable
exit
security zone-pair trusted self
rule 10
action permit
match protocol tcp
match destination-port ssh
enable
exit
rule 11
action permit
match protocol vrrp
enable
exit
rule 12
action permit
match protocol tcp
match destination-port softgre_controller
enable
exit
rule 13
action permit
match protocol tcp
match destination-port sync
enable
exit
rule 20
action permit
match protocol icmp
enable
exit
rule 30
action permit
match protocol udp
match source-port dhcp_client
match destination-port dhcp_server
enable
exit
rule 40
action permit
match protocol udp
match destination-port ntp
enable
exit
rule 50
action permit
match protocol tcp
match destination-port dns
enable
exit
rule 60
action permit
match protocol udp
match destination-port dns
enable
exit
rule 70
action permit
match protocol tcp
match destination-port netconf
enable
exit
rule 80
action permit
match protocol tcp
match destination-port sa
enable
exit
rule 90
action permit
match protocol udp
match destination-port radius_auth
enable
exit
rule 100
action permit
match protocol gre
enable
exit
rule 110
action permit
match protocol tcp
match destination-port airtune
enable
exit
exit
security zone-pair trusted trusted
rule 1
action permit
enable
exit
exit
security zone-pair trusted untrusted
rule 1
action permit
enable
exit
exit
security zone-pair untrusted self
rule 1
action permit
match protocol udp
match source-port dhcp_server
match destination-port dhcp_client
enable
exit
exit
security zone-pair users self
rule 10
action permit
match protocol icmp
enable
exit
rule 11
action permit
match protocol vrrp
enable
exit
rule 20
action permit
match protocol udp
match source-port dhcp_client
match destination-port dhcp_server
enable
exit
rule 30
action permit
match protocol tcp
match destination-port dns
enable
exit
rule 40
action permit
match protocol udp
match destination-port dns
enable
exit
exit
security zone-pair users untrusted
rule 1
action permit
enable
exit
exit
security passwords default-expired
nat source
ruleset factory
to zone untrusted
rule 10
description "replace 'source ip' by outgoing interface ip address"
action source-nat interface
enable
exit
exit
exit
ip dhcp-server
ip dhcp-server pool ap-pool
network 192.168.1.0/24
address-range 192.168.1.4-192.168.1.254
default-router 192.168.1.1
dns-server 192.168.1.1
option 42 ip-address 192.168.1.1
vendor-specific
suboption 12 ascii-text "192.168.1.1"
suboption 15 ascii-text "https://192.168.1.1:8043"
exit
exit
ip dhcp-server pool users-pool
network 192.168.2.0/24
address-range 192.168.2.4-192.168.2.254
default-router 192.168.2.1
dns-server 192.168.2.1
exit
ip dhcp-server failover
mode active-standby
local-address 192.168.1.3
remote-address 192.168.1.2
vrrp-group 1
enable
exit
softgre-controller
peer-address 192.168.1.2
nas-ip-address 127.0.0.1
vrrp-group 1
data-tunnel configuration wlc
aaa radius-profile default_radius
keepalive-disable
service-vlan add 3
enable
exit
wlc
outside-address 192.168.1.1
service-activator
aps join auto
password private-crt-key ascii-text encrypted 8CB5107EA7005AFF
exit
airtune
enable
exit
failover
local-address 192.168.1.3
remote-address 192.168.1.2
vrrp-group 1
enable
exit
ap-location default-location
description default-location
mode tunnel
ap-profile default-ap
airtune-profile default_airtune
radio-2g-profile default_2g
radio-5g-profile default_5g
ssid-profile default-ssid
exit
airtune-profile default_airtune
exit
ssid-profile default-ssid
description default-ssid
ssid default-ssid
radius-profile default-radius
vlan-id 3
security-mode WPA2_1X
802.11kv
band 2g
band 5g
enable
exit
radio-2g-profile default_2g
obss-coexistence off
exit
radio-5g-profile default_5g
dfs forced
obss-coexistence off
limit-channels 36,40,44,48,52,56,60,64
exit
ap-profile default-ap
password ascii-text encrypted 8CB5107EA7005AFF
exit
radius-profile default-radius
auth-address 192.168.1.1
auth-password ascii-text encrypted 8CB5107EA7005AFF
domain default
exit
ip-pool default-ip-pool
description default-ip-pool
ap-location default-location
exit
enable
exit
ip ssh server
ntp enable
ntp broadcast-client enable
crypto-sync
local-address 192.168.1.3
remote-address 192.168.1.2
vrrp-group 1
remote-delete
enable
exit
|
|
Проверка
...
Verification
To verify the synchronization of tunnels, WLC, DHCP можно посмотреть вывод, you can view the output:
Блок кода |
---|
WLC-1# show high-availability state
VRRP role: Master
AP Tunnels:
State: Successful synchronization
Last synchronization: 06:18:03 25.09.2023
DHCP option 82 table:
State: Disabled
Last state change: --
DHCP server:
VRF: --
State: Successful synchronization
crypto-sync:
State: Successful synchronization
Last synchronization: 06:18:03 25.09.2023
Firewall:
State: Disabled
Last state change: --
WLC:
State: Successful synchronization
Last synchronization: 06:18:03 25.09.2023 |
...