...
Для повышения безопасности передачи данных между клиентом и ТД необходимо обеспечить шифрование трафика с использованием SSL. Это требуетДля этого требуется:
SSL-сертификата сертификат (формат PEM);
Приватного ключа Приватный ключ (формат PEM).
| Предупреждение |
|---|
На На ТД возможно использовать RSA-сертификаты, ECDSA-сертификаты, не . ECDSA-сертификаты не поддержаны. |
Рекомендация по защите Для защиты приватного ключа в схеме с портальной авторизацией , рекомендуется использовать пароль.
Стандартный процесс выпуска сертификатов не предусматривает автоматическое шифрование приватного ключа. Однако это можно выполнить вручную с помощью утилиты OpenSSL.
...
-aes256 – алгоритм шифрования (можно заменить на -aes128 или -aes192);
-in private_key.pem – исходный незашифрованный ключ;
-out private_key_encrypted.pem – зашифрованный ключ.
После выполнения команды OpenSSL команды OpenSSL запросит пароль, который будет использоваться для защиты ключа.
Этот подход обеспечит дополнительный уровень защиты приватного обеспечит дополнительный уровень защиты приватного ключа от несанкционированного доступа.
| Подсказка |
|---|
Данная процедура проводится вне процесса выпуска сертификата и является дополнительной мерой безопасности. |
...
Допустимо использовать сертификат без шифрованного ключа. В таком случае приватный ключ добавляется к сертификату. Настройка crypto private-key-password не требуется.
Формат файла для сертификата без шифрованного ключа:
...
| Раскрыть |
|---|
| Блок кода |
|---|
#!/usr/bin/clish
#260
#1.26.1
#02/07/2024
#21:56:21
object-group service airtune
port-range 8099
exit
object-group service dhcp_client
port-range 68
exit
object-group service dhcp_server
port-range 67
exit
object-group service dns
port-range 53
exit
object-group service netconf
port-range 830
exit
object-group service ntp
port-range 123
exit
object-group service radius_auth
port-range 1812
exit
object-group service sa
port-range 8043-8044
exit
object-group service ssh
port-range 22
exit
object-group service web
port-range 443
exit
object-group network white_ip
ip prefix 192.168.0.0/24
ip prefix 192.168.1.0/24
ip prefix 100.110.0.0/23
exit
object-group url white_url
url eltex-co.ru
regexp '(.+\.)eltex-co\.com'
exit
syslog max-files 3
syslog file-size 512
syslog file tmpsys:syslog/default
severity info
exit
radius-server local
nas ap
key ascii-text encrypted 8CB5107EA7005AFF
network 192.168.1.0/24
exit
nas local
key ascii-text encrypted 8CB5107EA7005AFF
network 127.0.0.1/32
exit
domain default
exit
virtual-server default
enable
exit
enable
exit
username admin
password encrypted $6$mxcmBjMFhD3le5vZ$3qVKBN4Y6Uh126nuH/9VWOiH5m1pMWI1KvRTrrie5ZgmKaYxxZgeinS6Y210.3P2n.ZhlVHbaCcLKlfbOJzEG.
exit
radius-server host 127.0.0.1
key ascii-text encrypted 8CB5107EA7005AFF
exit
aaa radius-profile default_radius
radius-server host 127.0.0.1
exit
boot host auto-config
boot host auto-update
vlan 3
force-up
exit
vlan 2
exit
no spanning-tree
domain lookup enable
security zone trusted
exit
security zone untrusted
exit
security zone users
exit
bridge 1
vlan 1
security-zone trusted
ip address 192.168.1.1/24
no spanning-tree
enable
exit
bridge 2
vlan 2
security-zone untrusted
ip address dhcp
no spanning-tree
enable
exit
bridge 3
vlan 3
mtu 1458
security-zone users
ip address 192.168.2.1/24
no spanning-tree
enable
exit
interface gigabitethernet 1/0/1
mode switchport
switchport access vlan 2
exit
interface gigabitethernet 1/0/2
mode switchport
exit
interface gigabitethernet 1/0/3
mode switchport
exit
interface gigabitethernet 1/0/4
mode switchport
exit
interface tengigabitethernet 1/0/1
mode switchport
switchport access vlan 2
exit
interface tengigabitethernet 1/0/2
mode switchport
exit
tunnel softgre 1
mode data
local address 192.168.1.1
default-profile
enable
exit
security zone-pair trusted self
rule 10
action permit
match protocol tcp
match destination-port object-group ssh
enable
exit
rule 20
action permit
match protocol icmp
enable
exit
rule 30
action permit
match protocol udp
match source-port object-group dhcp_client
match destination-port object-group dhcp_server
enable
exit
rule 40
action permit
match protocol udp
match destination-port object-group ntp
enable
exit
rule 50
action permit
match protocol tcp
match destination-port object-group dns
enable
exit
rule 60
action permit
match protocol udp
match destination-port object-group dns
enable
exit
rule 70
action permit
match protocol tcp
match destination-port object-group netconf
enable
exit
rule 80
action permit
match protocol tcp
match destination-port object-group sa
enable
exit
rule 90
action permit
match protocol udp
match destination-port object-group radius_auth
enable
exit
rule 100
action permit
match protocol gre
enable
exit
rule 110
action permit
match protocol tcp
match destination-port object-group airtune
enable
exit
rule 120
action permit
match protocol tcp
match destination-port object-group web
enable
exit
exit
security zone-pair trusted trusted
rule 1
action permit
enable
exit
exit
security zone-pair trusted untrusted
rule 1
action permit
enable
exit
exit
security zone-pair untrusted self
rule 1
action permit
match protocol udp
match source-port object-group dhcp_server
match destination-port object-group dhcp_client
enable
exit
exit
security zone-pair users self
rule 10
action permit
match protocol icmp
enable
exit
rule 20
action permit
match protocol udp
match source-port object-group dhcp_client
match destination-port object-group dhcp_server
enable
exit
rule 30
action permit
match protocol tcp
match destination-port object-group dns
enable
exit
rule 40
action permit
match protocol udp
match destination-port object-group dns
enable
exit
exit
security zone-pair users untrusted
rule 1
action permit
enable
exit
exit
security passwords default-expired
nat source
ruleset factory
to zone untrusted
rule 10
description "replace 'source ip' by outgoing interface ip address"
action source-nat interface
enable
exit
exit
exit
ip dhcp-server
ip dhcp-server pool ap-pool
network 192.168.1.0/24
address-range 192.168.1.2-192.168.1.254
default-router 192.168.1.1
dns-server 192.168.1.1
option 42 ip-address 192.168.1.1
vendor-specific
suboption 12 ascii-text "192.168.1.1"
suboption 15 ascii-text "https://192.168.1.1:8043"
exit
exit
ip dhcp-server pool users-pool
network 192.168.2.0/24
address-range 192.168.2.2-192.168.2.254
default-router 192.168.2.1
dns-server 192.168.2.1
exit
softgre-controller
nas-ip-address 127.0.0.1
data-tunnel configuration wlc
aaa radius-profile default_radius
keepalive-disable
service-vlan add 3
enable
exit
wlc
outside-address 192.168.1.1
service-activator
aps join auto
exit
airtune
enable
exit
ap-location default-location
description default-location
mode tunnel
ap-profile default-ap
airtune-profile default_airtune
ssid-profile default-ssid
ssid-profile portal_test
exit
airtune-profile default_airtune
description default_airtune
exit
ssid-profile default-ssid
description default-ssid
ssid default-ssid
radius-profile default-radius
vlan-id 3
security-mode WPA2_1X
802.11kv
band 2g
band 5g
enable
exit
ssid-profile portal_test
ssid portal_test
radius-profile portal_radius
portal-enable
portal-profile portal-pr
vlan-id 3
band 5g
enable
exit
radio-2g-profile default_2g
description default_2g
exit
radio-5g-profile default_5g
description default_5g
exit
ap-profile default-ap
description default-ap
password ascii-text encrypted 8CB5107EA7005AFF
exit
portal-profile portal-pr
redirect-url https://eltex-co.ru
age-timeout 10
verification-mode external-portal
white-list domain white_url
white-list address white_ip
exit
radius-profile default-radius
description default-radius
auth-address 192.168.1.1
auth-password ascii-text encrypted 8CB5107EA7005AFF
domain default
exit
radius-profile portal_radius
auth-address 192.168.4.5
auth-password ascii-text encrypted 92BB3C7EB50C5AFE80
auth-acct-id-send
acct-enable
acct-address 192.168.4.5
acct-password ascii-text encrypted 92BB3C7EB50C5AFE80
acct-periodic
acct-interval 300
exit
ip-pool default-ip-pool
description default-ip-pool
ap-location default-location
exit
enable
exit
wlc-journal all
limit days 365
exit
ip ssh server
ntp enable
ntp broadcast-client enable
ip https server |
|
Диаграмма подключения
| draw.io Diagram |
|---|
| border | true |
|---|
| viewerToolbar | true |
|---|
| |
|---|
| fitWindow | false |
|---|
| diagramName | wlc_ap_portal |
|---|
| simpleViewer | false |
|---|
| width | |
|---|
| diagramWidth | 1294 |
|---|
| revision | 1 |
|---|
|
...