Сравнение версий

Ключ

  • Эта строка добавлена.
  • Эта строка удалена.
  • Изменено форматирование.

...

Side panels of the device have air vents for heat removal. Do not block air vents. This may cause the components to overheat, which may result in device malfunction. For recommendations on device installation, see section Installation and connection.

Scroll Pagebreak

ESR-3100 design

ESR-3100 front panel

...

Front panel element

Description

1

HDD1

Connector for HDD installation.

2

HDD2

Connector for HDD installation.

3

USB1

Port for USB device connection.

4

USB2

Port for USB device connection.

5

Combo Ports [1 .. 4]

4 ports of Gigabit Ethernet 10/100/1000BASE-X (SFP).

6

XG1 – XG8

Slots for 10G SFP+/1G SFP transceivers.

7

Status

Current device status LED.

Alarm

Alarm LED.

VPN

VPN gateway operation mode LED (is not supported in the current version).

Flash

Activity of exchange with data storage SD card or USB Flash.

Power

Device power LED.

Master

Failover mode operation LED (is not supported in the current version).

Fan

Fan operation LED.

RPS

Redundant power supply LED.

8

F

Functional key that reboots the device and resets it to factory default configuration:

  • Pressing the key for less than 10 seconds reboots the device;
  • Pressing the key for more than 10 seconds resets the terminal to factory settings.

9

Console

Console port RS-232 for local management of the device.

10

OOB

Ethernet port for router management.

ESR-1700 rear panel

The rear panel of ESR-1700 is shown in the picture below.

...

Figure 23 – ESR-1700 right side panel

Scroll Pagebreak

Figure 24 – ESR-1700 left side panel

...

Front panel element

Description

1

SD

SD-card connector.

2

USB1

Port for USB device connection.

3

USB2

Port for USB device connection.

4

XG1, XG2

Slots for 10G SFP+/1G SFP transceivers.

5

[1 .. 24]

24 ports of Gigabit Ethernet 10/100/1000BASE-T (RJ-45).

6

Status

Current device status LED.

Alarm

Alarm LED.

VPN

Active VPN sessions indicator.

Flash

Activity indicator of exchange with data storages (SD-card or USB Flash).

Power

Device power LED.

Master

Indicator of failover modes operation.

Fan

Fan operation LED.

RPS

Redundant power supply LED.

7

F

Functional key that reboots the device and resets it to factory default configuration:

  • Pressing the key for less than 10 seconds reboots the device;
  • Pressing the key for more than 10 seconds resets the terminal to factory settings.

8

Console

Console port RS-232 for local management of the device.

Scroll Pagebreak

ESR-1200, 1000 rear panel

...

Table 30 lists rear panel connectors of the router.

Scroll Pagebreak

Table 30 – Rear panel connectors description

...

Side panel element

Description

1

F

Functional key that reboots the device and resets it to factory default configuration:

  • pressing the key for less than 10 seconds reboots the device.
  • pressing the key for more than 10 seconds resets the device to factory default configuration.

ESR-10 top panel

The top panel layout of ESR-10 is depicted in figure below.

...

Table 42 lists LEDs located on ESR-10 top panel.

Scroll Pagebreak

Table 42 – Description of front panel LEDs

Top panel element

Description

1

Power

Device power and operation status LED.

2

-

The LED is not used.

3

USB1, USB2

External USB devices LED.

4

[1 .. 4]

Ethernet ports LED.

5

[5 .. 6]

Optical interfaces LED.

Light Indication

Якорь
light
light

ESR-1700, ESR-1200, ESR-1000 light indication

...

SPEED indicator is lit

LINK/ACT indicator is lit

Ethernet interface state

Off

Off

The port is disabled or connection is not established.

Off

Solid on

10 Mbps or 100 Mbps connection is established.

Solid on

Solid on

1000 Mbps connection is established.

X

Flashes

Data transfer is in progress.


Table 47 – Light – Light indication of SFP/SFP+/QSFP+ status

...

Якорь
table33_desc
table33_desc

ESR-200/ESR-100 light indication

Gigabit Ethernet copper interface and SFP interface statuses are represented by two LEDs – green LINK/ACT LED and amber SPEED LED. Location of the copper interface LEDs is depicted in figure 62. SFP interface status is depicted in figure66. For light indication meaning, see Table 49.

...

  • WLC-3200 controller;
  • Power cable;
  • Console cable;
  • 19” rack mounting kit;
  • Documentation (optional);
  • Technical passport.

Scroll Pagebreak

ESR-10 standard delivery package includes:

...

  • ESR-1700 router;
  • Console cable;
  • 19” rack mounting kit;
  • Documentation (optional);
  • Technical passport.

Scroll Pagebreak

ESR-3100 standard delivery package includes:

...