Сравнение версий

Старая версия 4

changes.mady.by.user Отдел Документации

Сохранено

по сравнению с

Новая версия Текущий

changes.mady.by.user Отдел Документации

Сохранено

Ключ

  • Эта строка добавлена.
  • Эта строка удалена.
  • Изменено форматирование.

...

A Shared Block
hiddentrue
shared-block-key1


Metadata list
hiddentrue
|| DeviceType | Wireless access controllers  |
|| DeviceName1 | WLC-15, WLC-30, WLC-3200 |
|| DeviceType2 | ESR series service routers |
|| DeviceName2 | ESR-15, ESR-30, ESR-3100, ESR-3200 |
|| DocTitleAdditional | Release notes |
|| fwversion | 1.30.6 |


Version 1.30.6

Revisions:

  • Monitoring and management:
    • CLI:
      • snmp-server enable traps wlc-wids command to enable sending SNMP traps for WIDS events
      • Functionality of converting 43 DHCP options from ASCII to hex has been implemented (format dhcp option-43 in the debug section)
    • WEB:
      • UI interface has been improved
      • Monitoring
        • WIDS log
        • Sorting of configuration files by date has been improved
        • Displaying the hostname on AP monitoring pages
        • Date format in filters in the “Event Log” section has been changed
        • Displaying the utilization and interference parameters in AP radio interfaces monitoring
      • Configuration
        • RADIUS server settings section
        • VLAN settings section
        • The configuration for portal authorization on AP has been implemented
        • ARP suppression configuration in the radio profile (not supported for WEP/WOP-2ac, WEP-3ax, WEP-550K)
    • WLC:
      • Support for WEP-550K, WEP-30L-NB, WOP-3L-EX AP
      • Synchronization of WLC logs during redundancy
      • Support for portal authorization with Eltex-NAICE (for WEP-30L/WEP-30L-NB/30L-Z and WOP-30L/30LI/30LS)
      • Support for redirecting CoA requests to radius-server local for portal authorization
      • Monitoring
        • Displaying the utilization and interference parameters in extended AP monitoring
        • Unified format for displaying AP firmware in the show wlc ap firmware command
        • show wlc journal info command for viewing summary information about WLC logs
        • Units of measurement for speed in the show wlc ap interfaces <mac> output
      • Configuration
        • disconnect-on-reject command in portal-profile to disconnect the user upon Reject from RADIUS during MAB authentication (supported for WEP-30L/WEP-30L-NB/30L-Z and WOP-30L/30LI/30LS)
        • http-auth-disable command in portal-profile to disable portal interaction with the AP via HTTP/HTTPS during user authorization
        • neighbor-scan command in ap-profile to configure passive scanning has been extended for WEP-200L, WOP-20L, and WEP-3ax
        • captive-adaptive command in ap-profile to enable portal authorization compatibility mode for iOS devices
        • redirect-url-format command in portal-profile to specify the format of the user's MAC address and the format of the NAS ID in the redirect address when configuring portal authorization
        • description command for user in radius-server local
        • Configuring url-acl-profile and ipv4-acl in ap-profile and portal-profile to configure domain and IP address lists on the AP. The lists are used for unauthorized portal users
        • Block of commands in ap-profile for configuring DAS parameters on the AP
        • Block of commands in radius-server local for configuring DAS parameters used when redirecting CoA requests
        • Ability to add a location name (location=<AP_LOCATION>) to redirect-url-custom in portal-profile
        • Ability to redirect AAA RADIUS requests for different SSID to different servers
        • The default value for the load-balance command in airtune-profile has been changed from “enabled” to “disabled”
    • SNMP:
      • OID eltWlcApInfoByMacTable (1.3.6.1.4.1.35265.1.224.1.3.2.7) is added to ELTEX-WLC-MIB which containsinformationabout the AP indexedbyMACaddress
      • OID eltWlcRadioRxUtilization (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.14) is added to ELTEX-WLC-MIB toview the RXdisposalon the AP
      • OID eltWlcRadioTxUtilization (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.15) is added to ELTEX-WLC-MIB toview the disposal TXT on the AP
      • OID eltWlcRadioApInterferenceRatio (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.17) is added to ELTEX-WLC-MIB toview interference between Wi-Fi devices that operate on close but not completely independent channels 
      • OID eltWlcRadioCoChannelInterference (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.18) is added to ELTEX-WLC-MIB toview interferencebetweenWi-Fidevicesthatoperateonthesamechannel
      • OID eltWlcRadioNoiseLevel (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.19) is added to ELTEX-WLC-MIB toview the noiselevelon the radio channel
      • OID eltWlcRadioPacketErrorRate (OID .1.3.6.1.4.1.35265.1.224.1.3.2.4.1.20) is added to ELTEX-WLC-MIB toview the percentage of packetscorrupteddue to interference,weaksignal, orcollisions
      • WIDS ladders are added to ELTEX-WLC-MIB
      • OID eltexEnvMemoryAvailable (OID .1.3.6.1.4.1.35265.38.40.40.11) is added to ELTEX-GENERIC-MIB toview available memory
    • Syslog:
      • match process-name web command to filter WEB server events
  • Security:
    • Licensing:
      • Increased license lifetime when ELM is unavailable

...

  • Erroneous termination of the lic-mgr service
  • Bootloaders are not updated when updating firmware via the WEB
  • After deleting radio-5g-profile, APs switch to Cfg failed status
  • In ldap-profile, it is not possible to set ldap-server via a domain name
  • Not all AirTune sessions are displayed

Version 1.30.4

Revisions:

  • Implemented synchronization of AP firmware in the backup scheme
  • Monitoring and management:
    • Addedcritlog directory to show tech-support command output
    • WEB:
      • Full audit of administrator actions in the WEB interface via TACACS+ / RADIUS 
      • Optimized operation of WEB server when operating with clients and AP
      • Improved adaptation of the WEB interface to different screen resolution
      • Monitoring
        • Filtering on the "Access points" and "Clients" pages
        • Pagination when displaying data on the "Access points", "Clients", "Event log" pages
        • CPU load graph
        • Client IP address on client monitoring pages 
        • "VLAN number" column in the virtual access points table
        • "Range" column in the clients table
        • Monitoring of the 802.11v parameter on the "Roaming data" page
        • Client IP address changed check-box in the client log
        • Unified pop-up windows and snack bars when operating with tables
      • Configuration
        • Portal authorization settings
        • Ability to limit the traffic speed (clients, VAP, broadcast, multicast)
        • Configuring the 82 DHCP option on AP in radio profile
        • Configuring the 802.11v in the AirTune profile
        • Configuring the "Country code" in the AP profile tocomply with localrestrictionsonchannelsandtransmitterpowercorresponding to the selectedcountry
        • Changed order of settings in the SSID profile
        • Configuring the IEEE 802.11 n/ac, a/n/ac modes for 5 GHz radio interface in the individual AP settings
    • WLC:
      • wlc-journal storage command to transfer WLC logs to HDD
      • Optimized AP connection speed
      • Optimized AP connection stability
      • Monitoring
        • Display the "VLAN" in the show wlc ap vap command output
        • Display the range in which the client operates in the show wlc clients command output
        • Display the ap-location in the AP log(show wlc journal ap)
        • Display the band in the AP log (show wlc journal client)
      • Configuration
        • country-code command in the ap-profile tocomply with localrestrictionsonchannelsandtransmitterpowercorresponding to the selectedcountry
        • The maximum size of WLC logs is limited to 90 days. When updating to 1.30.4 firmware version, the size of existing logs will be automatically reduced
        • Configuring the MQTT positioning for WEP-1L, WEP-2L, WOP-2L, WEP-3L
        • Configuring the WIDS/WIPS for WEP-200L and WOP-20L
        • neighbour-scan command in the ap-profile for configuring passive scanning on WOP/WEP-30L, WEP-30L-Z, WOP-30LS, WOP-30LI
        • show wlc statistics command block for displaying statistics on clients and AP events
        • arp suppression command for configuring ARP conversion
        • lldp-server command block in ap-profile/services for configuring LLDP 
        • lldp command block in ap-profile/trace for configuring LLDP logging
        • Ability to add NAS IP to the redirect address when configuring portal authorization via RADIUS
        • Processing of deauth-attack in WIDS
        • load-balance roaming clients max/min commands in airtune-profile for configuring the maximum/minimum number of users during balancing
        • 802.11r cross-location-roaming command in AirTune settings to enable 802.11r roaming between locations
    • Syslog:
      • syslog web-commands for logging actions on WEB 
      • logging wlc-events/logging wlc-journal command for enabling WLC logs to syslog server
    • SNMP:
      • Optimization of WLC tables

...