This command sets the requested lease time for the IP address.
The use of a negative form (no) of the command sets the default value.
dhclient lease-time <TIME>
no dhclient lease-time
<TIME> – IP address leasing time, may take values [0 .. 3600] s.
100 seconds
CONFIG
ma4000(config)# dhclient lease-time 200 |
This command specifies the time during which a restarted DHCP client requests a previously issued IP address.
The use of a negative form (no) of the command sets the default value.
dhclient reboot <TIME>
no dhclient reboot
<TIME> – IP address request time, may take values [0 .. 3600] s.
10 seconds
CONFIG
ma4000(config)# dhclient reboot 20 |
This command sets the time between attempts to obtain an IP address.
The use of a negative form (no) of the command sets the default value.
dhclient retry <TIME>
no dhclient retry
<TIME> – timeout for IP address re-obtaining, may take values [0 .. 3600] s.
120 seconds
CONFIG
ma4000(config)# dhclient retry 120 |
This command sets the time of waiting for the response from the DHCP server to the request.
The use of a negative form (no) of the command sets the default value.
dhclient select-timeout <TIME>
no dhclient select-timeout
<TIME> – DHCP server response waiting time, take values [0 .. 3600] s.
3 seconds
CONFIG
ma4000(config)# dhclientselect-timeout 3 |
This command specifies the time during which a DHCP client tries to obtain an IP address.
The use of a negative form (no) of the command sets the default value.
dhclient timeout <TIME>
no dhclient timeout
<TIME> – time for IP address obtaining by DHCP client, may take values [0 .. 3600] s.
60 seconds
CONFIG
ma4000(config)# dhclient timeout 90 |