In the ONT configuration 'TEMPLATE' mode, you can configure a set of profiles and ONT configuration parameters which will be used as a template. You can assign the template to an ONT or a group of ONTs, and all configuration template settings will overwrite those performed on ONT.
This command allows to create a new template and/or switch to its configuration mode.
The use of a negative form (no) of the command removes the template.
[no] template <NAME>
<NAME> – template name, case sensitive.
CONFIG
ma4000(config)# template name ma4000(ont-template)("name")# |
The command changes the name of the configured template.
name <STRING>
<STRING> – template name, case sensitive.
TEMPLATE
ma4000(ont-template)("name")# name test |
This command allows to add a description for the profile to be configured.
The use of a negative form (no) of the command removes description.
[no] description <STRING>
<STRING> – text description.
TEMPLATE
ma4000(ont-template)("name")# description name |
This command allows to set the error rate count interval for the downstream direction. At the end of the interval, ONT sends a REI message.
The use of a negative form (no) of the command sets the default value.
ber interval <INTERVAL>
no ber interval
<INTERVAL> – number of packets, may take values [0..4294967294]. If 'none' is specified, ONT will not send the REI message.
TEMPLATE
ma4000(ont-template)("name")# ber interval 500000 |
This command allows to set the interval of sending messages to the OLT with error rate data for the downstream direction.
The use of a negative form (no) of the command sets the default value.
ber update-period <PERIOD>
no ber update-period
<PERIOD> – time period, may take values [0..4294967295], in seconds.
TEMPLATE
ma4000(ont-template)("name")#ber update-period 500000 |
This command enables sending broadcast packets in a downstream direction through the dedicated GEM port.
The use of a negative form (no) of the command sets the default value.
[no] broadcast-downstream
The command contains no arguments.
TEMPLATE
ma4000(ont-template)("name")#broadcast-downstream |
This command enables upstream error correction mode when transmitting data from ONT.
The use of a negative form (no) of the command sets the default value.
[no] fec
The command contains no arguments.
TEMPLATE
ma4000(ont-template)("name")#fec |
This command disables the processing of errors that occur during the ONT configuration by OMCI.
The use of a negative form (no) of the command sets the default value.
[no] omci-error-tolerant
The command contains no arguments.
TEMPLATE
ma4000(ont-template)("name")# omci-error-tolerant |
This command sets the OMCI configuration of the ONT password.
The use of a negative form (no) of the command sets the default value.
password <STRING>
no password
<STRING> – authorization OMCI password, 10 characters.
TEMPLATE
ma4000(ont-template)("name")#password |
This command sets the operation mode of the ONT RF port in the configuration. Support for this feature should be implemented on ONT.
The use of a negative form (no) of the command sets the default value.
rf-port-state <STATE>
no rf-port-state
<STATE> – RF port operation mode:
TEMPLATE
ma4000(ont-template)("name")#rf-port-state enabled |
This command sets the ONT serial number (PONSERIAL ONT) in the template configuration.
The use of a negative form (no) of the command sets the default value.
serial <PONSERIAL>
no serial
<PONSERIAL> – ONT serial number in format:
TEMPLATE
ma4000(ont-template)("name")#serial ELTX00000000 |
This command sets ONT configuration profiles to the specified template.
The use of a negative form (no) of the command sets the default value.
profile <TYPE> <NAME>
no profile <TYPE>
<TYPE> – configuration profile type:
<NAME> – configuration profile name, case sensitive.
TEMPLATE
ma4000(ont-template)("name")#profile ports ports-00 |
This command sets ONT service configuration profiles to the specified template.
The use of a negative form (no) of the command sets the default value.
service <SERVICEID> profile <TYPE> <NAME>
no service <SERVICEID> profile <TYPE>
<SERVICEID> – service number, may take values [0..15];
<TYPE> – profile type:
<NAME> – configuration profile name, case sensitive.
TEMPLATE
ma4000(ont-template)("name")# service 0 profile dba dba-00 |
This command adds a parameter to the ONT configuration template.
define <PARAM>
<PARAM> – ONT configuration parameter:
<SERVICEID>– service number, may take values [0..15].
TEMPLATE
ma4000(ont-template)("name")# define rf-port-state |
This command removes a parameter from the ONT configuration template.
undefine <PARAM>
<PARAM> – ONT configuration parameter:
<SERVICEID>– service number, may take values [0..7].
TEMPLATE
ma4000(ont-template)("name")# undefine ber interval |
This command displays the configuration template parameters.
show template <NAME>
<NAME> – template name, case sensitive. Optional parameter
If no template name is specified – the list of all templates is displayed, if the name is specified – the configuration of this template is displayed.
ROOT
Ma4000# show template template-00 Name: 'template-00' Description: 'ONT Template 0' ____________________________________________________________________ Fec up: false Downstream broadcast: true Ber interval: 100000 Ber update period: 60 Rf port state: disabled Omci error tolerant: false ____________________________________________________________________ Profile shaping: shaping-00 ONT Profile Shaping 0 Profile ports: ports-00 ONT Profile Ports 0 Service [0]: Profile cross connect: unassigned Profile dba: dba-00 ONT Profile DBA 0 Service [1]: Profile cross connect: unassigned Profile dba: unassigned Service [2]: Profile cross connect: unassigned Profile dba: unassigned Service [3]: Profile cross connect: unassigned Profile dba: unassigned Service [4]: Profile cross connect: unassigned Profile dba: unassigned Service [5]: Profile cross connect: unassigned Profile dba: unassigned Service [6]: Profile cross connect: unassigned Profile dba: unassigned Service [7]: Profile cross connect: unassigned Profile dba: unassigned Profile management: management-00 ONT Profile Management 0 Profile scripting: unassigned |