OID Type Name Description SET example Possible values Radio configuration .1.3.6.1.4.1.35265.1.127.5.1.1.1.1.0 STRING radioCommonInterface.0 2.4 GHz radio interface name
The parameter is not available for editing, read only.
wlan0 .1.3.6.1.4.1.35265.1.127.5.1.1.1.1.1 STRING radioCommonInterface.1 5 GHz radio interface name The parameter is not available for editing, read only. wlan1 .1.3.6.1.4.1.35265.1.127.5.1.1.1.2.0 STRING radioWorkMode.0 802.11 mode 2.4 GHz
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.2.0 s bg
"bg", "bgn", "n" .1.3.6.1.4.1.35265.1.127.5.1.1.1.2.1 STRING radioWorkMode.1 802.11 mode 5 GHz
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.2.1 s an
"a", "an", "ac" .1.3.6.1.4.1.35265.1.127.5.1.1.1.3.0 INTEGER radioTxPower.0 2.4 GHz transmit power, dBm
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.3.0 i 13
"11 - 16"
.1.3.6.1.4.1.35265.1.127.5.1.1.1.3.1 INTEGER radioTxPower.1 5 GHz transmit power, dBm
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.3.1 i 15
"11- 19" .1.3.6.1.4.1.35265.1.127.5.1.1.1.38.0 INTEGER radioAutoChannel.0 2.4 GHz radio channel auto selection
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.1.1.38.0 i 1
"0" — disable "1" — enable
When auto channel selection is enabled, operational channel is selected from a limited list of channels — radioLimitChannels.0
If use of limited list of channels radioUseLimitChannels.0 is disabled, operational channel will be selected from all channels of the 2.4 GHz range (from 1 to 13 channel)
If auto selection is disabled, the access point will operate on the channel specified in the radioChannel.0 parameter
.1.3.6.1.4.1.35265.1.127.5.1.1.1.38.1 INTEGER radioAutoChannel.1 5 GHz radio channel auto selection
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.1.1.38.1 i 1
"0" — disable "1" — enable
When auto channel selection is enabled, operational channel is selected from a limited list of channels — radioLimitChannels.1
If use of limited list of channels radioUseLimitChannels.0 is disabled, operational channel will be selected from all channels of the 5 GHz range (from 36 to 165 channel)
If auto selection is disabled, the access point will operate on the channel specified in the radioChannel.1 parameter
.1.3.6.1.4.1.35265.1.127.5.1.1.1.39.0 INTEGER radioUseLimitChannels.0 Using a limited channel list in 2.4 GHz auto channel selection
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.1.1.39.0 i 1
"0" — disable "1" — enable
If this parameter is enabled, the auto selection process will utilize the limited list of channels described in the radioLimitChannels.0 parameter
If disabled, the limited list of channels will be ignored, and a channel will be selected from the entire 2.4 GHz range (from channel 1 to 13)
.1.3.6.1.4.1.35265.1.127.5.1.1.1.39.1 INTEGER radioUseLimitChannels.1 Using a limited channel list in 2.4 GHz auto channel selection
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.1.1.39.1 i 1
"0" — disable "1" — enable
If this parameter is enabled, the auto selection process will utilize the limited list of channels described in the radioLimitChannels.1 parameter
If disabled, the limited list of channels will be ignored, and a channel will be selected from the entire 5 GHz range (from channel 36 to 165)
.1.3.6.1.4.1.35265.1.127.5.1.1.1.40.0 STRING radioLimitChannels.0 2.4 GHz limited list of channels
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.40.0 s '1 6 11'
The limited list of channels is specified by a line formatted as '1 6 11'
Use of this list in auto select depends on radioUseLimitChannels.0 parameter state.
.1.3.6.1.4.1.35265.1.127.5.1.1.1.40.1 STRING radioLimitChannels.1 5 GHz limited list of channels
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.40.1 s '36 40 44 48'
The limited list of channels is specified by a line formatted as '36 40 44 48'
Use of this list in auto select depends on radioUseLimitChannels.1 parameter state.
.1.3.6.1.4.1.35265.1.127.5.1.1.1.5.0 INTEGER radioChannel.0 2.4 GHz radio channel number
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.5.0 i 7
At 20 MHz channel width: "1 - 13"
At 40 MHz channel width:
"1 - 9" — Lower "5 - 13" — Upper
.1.3.6.1.4.1.35265.1.127.5.1.1.1.5.1 INTEGER radioChannel.1 5 GHz radio channel number
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.5.1 i 136
At 20 MHz channel width: "36 - 165"
At 40 MHz Lower channel width:
"36, 44, 52, 60, 132,140, 149, 157"
At 40 MHz Upper channel width:
"40, 48, 56, 64, 136,144, 153, 161"
At 80 MHz channel width: "36 - 161"
.1.3.6.1.4.1.35265.1.127.5.1.1.1.6.0 INTEGER radioBandwidth.0 2.4 GHz radio channel width
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.6.0 i 40
"20", "40"
If an error occurs when setting channel width to 40 MHz, check which channel is currently set on the access point. It is possible that this channel does not meet the condition specified in the radioControlSideBand.0 parameter. In this case:
Set channel width to 20 MHz. Change either the channel to one that satisfies the radioControlSideBand.0 condition. (Lower or Upper), or the condition. Set channel width to 40 MHz. .1.3.6.1.4.1.35265.1.127.5.1.1.1.6.1 INTEGER radioBandwidth.1 5 GHz radio channel width
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.6.1 i 80
"20", "40", "80"
If an error occurs when setting channel width to 40 MHz, check which channel is currently set on the access point. It is possible that this channel does not meet the condition specified in the radioControlSideBand.1 parameter.
In this case:
Set channel width to 20 MHz. Change either the channel to one that satisfies the radioControlSideBand.1 condition. (Lower or Upper), or the condition. Set channel width to 40 MHz. .1.3.6.1.4.1.35265.1.127.5.1.1.1.7.0 STRING radioControlSideBand.0 Selection of the main 2.4 GHz channel (lower, upper) for 40 MHz band
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.7.0 s upper
"upper" — upper channel "lower" — lower channel
If an error occurs when changing the parameter value, it may mean that the current operational channel does not match the new value of this parameter.
To change main channel:
Set channel width to 20 MHz. Change the value of the operational channel to match the value of the "Main channel". Change the value of the "Main channel" parameter. Return channel width to initial value — 40 MHz. .1.3.6.1.4.1.35265.1.127.5.1.1.1.7.1 STRING radioControlSideBand.1 Selection of the main 5 GHz channel (lower, upper) for 40 MHz band
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.7.0 s upper
"upper" — upper channel "lower" — lower channel
If an error occurs when changing the parameter value, it may mean that the current operational channel does not match the new value of this parameter.
To change main channel:
Set channel width to 20 MHz. Change the value of the operational channel to match the value of the "Main channel". Change the value of the "Main channel" parameter. Return channel width to initial value — 40 MHz. .1.3.6.1.4.1.35265.1.127.5.1.1.1.8.0 INTEGER radioEnableFixedRate.0 Enabling fixed 2.4 GHz transmission rate
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.1.1.8.0 i 1
"0" — disable "1" — enable .1.3.6.1.4.1.35265.1.127.5.1.1.1.8.1 INTEGER radioEnableFixedRate.1 Enabling fixed 5 GHz transmission rate
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.8.1 i 1
"0" — disable "1" — enable .1.3.6.1.4.1.35265.1.127.5.1.1.1.9.0 STRING radioFixedRate.1 Fixed modulation for 2.4 GHz transmission
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.9.0 s MCS8
At 20 MHz channel width:
DSSS1, DSSS2 CCK5, CKK11 OFDM6, OFDM9, OFDM12, OFDM18, OFDM24, OFDM36, OFDM48, OFDM54 MCS0...MCS15
At 40 MHz channel width:
MCS0...MCS15
.1.3.6.1.4.1.35265.1.127.5.1.1.1.9.1 STRING radioFixedRate.1 Fixed modulation for 5 GHz transmission
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.9.1 s NSS2-MCS4
At 20 MHz channel width:
OFDM6, OFDM9, OFDM12, OFDM18, OFDM24, OFDM36, OFDM48, OFDM54 MCS0...MCS15 NSS1-MCS0...NSS1-MCS8 NSS2-MCS0...NSS2-MCS8
At 40 MHz channel width:
MCS0...MCS15 NSS1-MCS0...NSS1-MCS8 NSS2-MCS0...NSS2-MCS8
At 80 MHz channel width:
NSS1-MCS0...NSS1-MCS8 NSS2-MCS0...NSS2-MCS8
.1.3.6.1.4.1.35265.1.127.5.1.1.1.10.0 INTEGER radioEnableMaximalRate.0 Enabling restrictions for modulation for 2.4 GHz transmission
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.10.0 i 1
"0" — disable "1" — enable .1.3.6.1.4.1.35265.1.127.5.1.1.1.10.1 INTEGER radioEnableMaximalRate.1 Enabling restrictions for modulation for 5 GHz transmission
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.10.1 i 1
"0" — disable "1" — enable .1.3.6.1.4.1.35265.1.127.5.1.1.1.26.0 INTEGER radioAckTimeout.0 2.4 GHz ACK timeout
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.26.0 i 128
[0; 255] .1.3.6.1.4.1.35265.1.127.5.1.1.1.26.1 INTEGER radioAckTimeout.1 5 GHz ACK timeout
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.26.0 i 128
[0; 255] .1.3.6.1.4.1.35265.1.127.5.1.1.1.27.0 INTEGER radioDisableAtf.0 Disabling 2.4 GHz ATF
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.27.0 i 1
"0" — enable ATF "1" — disable ATF .1.3.6.1.4.1.35265.1.127.5.1.1.1.27.1 INTEGER radioDisableAtf.1 Disabling 5 GHz ATF
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.27.1 i 1
"0" — enable ATF "1" — disable ATF .1.3.6.1.4.1.35265.1.127.5.1.1.1.28.0 INTEGER radioObssCoex.0 Enabling 2.4 GHz OBSS
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.28.0 i 1
"0" — disable "1" — enable
Only for 40 MHz
.1.3.6.1.4.1.35265.1.127.5.1.1.1.28.1 INTEGER radioObssCoex.1 Enabling 5 GHz OBSS
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.28.1 i 1
"0" — disable "1" — enable
Only for 40 and 80 MHz
.1.3.6.1.4.1.35265.1.127.5.1.1.1.29.1 STRING radioDfs.1 Selecting 5 GHz DFS mode
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.29.1 s forced
"disabled" — mechanism is off, DFS channels are not available to select;
"auto" — mechanism is enabled;
"forced" — mechanism is enabled, DFS channels are available to select.
.1.3.6.1.4.1.35265.1.127.5.1.1.1.30.0 INTEGER radioSgi.0 Enabling 2.4 GHz SGI
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.30.0 i 1
"0" — disable "1" — enable .1.3.6.1.4.1.35265.1.127.5.1.1.1.30.1 INTEGER radioSgi.1 Enabling 5 GHz SGI
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.30.1 i 1
"0" — disable "1" — enable .1.3.6.1.4.1.35265.1.127.5.1.1.1.31.0 INTEGER radioStbc.0 Enabling 2.4 GHz STBC
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.31.0 i 1
"0" — disable "1" — enable .1.3.6.1.4.1.35265.1.127.5.1.1.1.31.1 INTEGER radioStbc.1 Enabling 5 GHz STBC
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.31.1 i 1
"0" — disable "1" — enable .1.3.6.1.4.1.35265.1.127.5.1.1.1.32.0 INTEGER radioBeaconInterval.0 2.4 GHz beacon interval
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.32.0 i 1000
[20; 2000] .1.3.6.1.4.1.35265.1.127.5.1.1.1.32.1 INTEGER radioBeaconInterval.1 5 GHz beacon interval
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.32.1 i 1000
[20; 2000] .1.3.6.1.4.1.35265.1.127.5.1.1.1.33.0 INTEGER radioFragThreshold.0 2.4 GHz fragmentation threshold
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.33.0 i 1000
[256; 2346] .1.3.6.1.4.1.35265.1.127.5.1.1.1.33.1 INTEGER radioFragThreshold.1 5 GHz fragmentation threshold
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.33.1 i 1000
[256; 2346] .1.3.6.1.4.1.35265.1.127.5.1.1.1.34.0 INTEGER radioRtsThreshold.0 2.4 GHz RTS threshold
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.34.0 i 30000
[0; 65536] .1.3.6.1.4.1.35265.1.127.5.1.1.1.34.1 INTEGER radioRtsThreshold.1 5 GHz RTS threshold
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.34.1 i 30000
[0; 65536] .1.3.6.1.4.1.35265.1.127.5.1.1.1.35.0 INTEGER radioAggregation.0 2.4 GHz frame aggregation
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.35.0 i 1
"0" — disable "1" — enable .1.3.6.1.4.1.35265.1.127.5.1.1.1.35.1 INTEGER radioAggregation.1 5 GHz frame aggregation
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.35.1 i 1
"0" — disable "1" — enable .1.3.6.1.4.1.35265.1.127.5.1.1.1.36.0 INTEGER radioShortPreamble.0 2.4 GHz short preamble
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.36.0 i 1
"0" — disable "1" — enable .1.3.6.1.4.1.35265.1.127.5.1.1.1.36.1 INTEGER radioShortPreamble.1 5 GHz short preamble
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.36.1 i 1
"0" — disable "1" — enable .1.3.6.1.4.1.35265.1.127.5.1.1.1.37.0 INTEGER radioTxBroadcastLimit.0 2.4 GHz Broadcast/Multicast traffic limiting
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.37.0 i 1000000000
[0; 2000000000] .1.3.6.1.4.1.35265.1.127.5.1.1.1.37.1 INTEGER radioTxBroadcastLimit.1 5 GHz Broadcast/Multicast traffic limiting
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.37.1 i 1000000000
[0; 2000000000] QoS configuration .1.3.6.1.4.1.35265.1.127.5.1.2.1.1.0 STRING radioQosInterface.0 Name of the interface on which QoS is configured at 2.4 GHz The parameter is not available for editing, read only wlan0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.1.1 STRING radioQosInterface.1 Name of the interface on which QoS is configured at 5 GHz The parameter is not available for editing, read only wlan1 .1.3.6.1.4.1.35265.1.127.5.1.2.1.2.0 INTEGER radioManualQoSEnable.0 Enabling 2.4 GHz QoS (it is possible to override default EDCA parameters)
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.2.1.2.0 i 1
"0" — disable "1" — enable .1.3.6.1.4.1.35265.1.127.5.1.2.1.2.1 INTEGER radioManualQoSEnable.1 Enabling 5 GHz QoS (it is possible to override default EDCA parameters)
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.2.1.2.1 i 1
"0" — disable "1" — enable EDCA parameters of the base station
.1.3.6.1.4.1.35265.1.127.5.1.2.1.3.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.3.1 INTEGER radioApBkAifs.0 radioApBkAifs.1 2.4 and 5 GHz AIFS Background queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.3.0 i 128
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.3.1 i 128
[1; 255] .1.3.6.1.4.1.35265.1.127.5.1.2.1.4.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.4.1 INTEGER radioApBkCwMin.0 radioApBkCwMin.1 2.4 and 5 GHz cwMin Background queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.4.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.4.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.5.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.5.1 INTEGER radioApBkCwMax.0 radioApBkCwMax.1 2.4 and 5 GHz cwMax for Background queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.5.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.5.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.6.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.6.1 INTEGER radioApBkTxOp.0 radioApBkTxOp.1 2.4 and 5 GHz TXOP Limit for Background queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.6.0 i 30000
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.6.1 i 30000
[0; 65535] .1.3.6.1.4.1.35265.1.127.5.1.2.1.7.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.7.1 INTEGER radioApBeAifs.0 radioApBeAifs.1 2.4 and 5 GHz AIFS for Best Effort queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.7.0 i 128
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.7.1 i 128
[1; 255] .1.3.6.1.4.1.35265.1.127.5.1.2.1.8.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.8.1 INTEGER radioApBeCwMin.0 radioApBeCwMin.1 2.4 and 5 GHz cwMin for Best Effort queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.8.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.8.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.9.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.9.1 INTEGER radioApBeCwMax.0 radioApBeCwMax.1 2.4 and 5 GHz cwMax for Best Effort queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.9.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.9.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.10.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.10.1 INTEGER radioApBeTxOp.0 radioApBeTxOp.1 2.4 and 5 GHz TXOP Limit for Best Effort queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.10.0 i 30000
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.10.1 i 30000
[0; 65535] .1.3.6.1.4.1.35265.1.127.5.1.2.1.11.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.11.1 INTEGER radioApViAifs.0 radioApViAifs.1 2.4 and 5 GHz AIFS for Video queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.11.0 i 128
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.11.1 i 128
[1; 255] .1.3.6.1.4.1.35265.1.127.5.1.2.1.12.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.12.1 INTEGER radioApViCwMin.0 radioApViCwMin.1 2.4 and 5 GHz cwMin for Video queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.12.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.12.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.13.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.13.1
INTEGER radioApViCwMax.0 radioApViCwMax.1
2.4 and 5 GHz cwMax for Video queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.13.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.13.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.14.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.14.1 INTEGER radioApViTxOp.0 radioApViTxOp.1 2.4 and 5 GHz TXOP Limit for Video queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.14.0 i 30000
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.14.1 i 30000
[0; 65535] .1.3.6.1.4.1.35265.1.127.5.1.2.1.15.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.15.1 INTEGER radioApVoAifs.0 radioApVoAifs.1
2.4 and 5 GHz AIFS for Voice queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.15.0 i 128
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.15.1 i 128
[1; 255] .1.3.6.1.4.1.35265.1.127.5.1.2.1.16.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.16.1 INTEGER radioApVoCwMin.0 radioApVoCwMin.1 2.4 and 5 GHz cwMin for Voice queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.16.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.16.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.17.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.17.1 INTEGER radioApVoCwMax.0 radioApVoCwMax.1 2.4 and 5 GHz cwMax for Voice queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.17.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.17.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.18.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.18.1 INTEGER radioApVoTxOp.0 radioApVoTxOp.1 2.4 and 5 GHz TXOP Limit for Voice queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.18.0 i 30000
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.18.1 i 30000
[0; 65535] EDCA parameters for user station
.1.3.6.1.4.1.35265.1.127.5.1.2.1.19.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.19.1 INTEGER radioClientBkAifs.0 radioClientBkAifs.1 2.4 and 5 GHz AIFS for Background queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.19.0 i 128
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.19.1 i 128
[1; 255] .1.3.6.1.4.1.35265.1.127.5.1.2.1.20.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.20.1 INTEGER radioClientBkCwMin.0 radioClientBkCwMin.1 2.4 and 5 GHz cwMin for Background queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.20.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.20.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.21.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.21.1 INTEGER radioClientBkCwMax.0 radioClientBkCwMax.1 2.4 and 5 GHz cwMax for Background queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.21.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.21.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.22.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.22.1 INTEGER radioClientBkTxOp.0 radioClientBkTxOp.1 2.4 and 5 GHz TXOP Limit for Background
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.22.0 i 30000
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.22.1 i 30000
[0; 65535] .1.3.6.1.4.1.35265.1.127.5.1.2.1.23.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.23.1 INTEGER radioClientBeAifs.0 radioClientBeAifs.1 2.4 and 5 GHz AIFS for Best Effort queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.23.0 i 128
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.23.1 i 128
[1; 255] .1.3.6.1.4.1.35265.1.127.5.1.2.1.24.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.24.1 INTEGER radioClientBeCwMin.0 radioClientBeCwMin.1 2.4 and 5 GHz cwMin for Best Effort
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.24.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.24.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.25.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.25.1 INTEGER radioClientBeCwMax.0 radioClientBeCwMax.1 2.4 and 5 GHz cwMax for Best Effort queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.25.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.25.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.26.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.26.1 INTEGER radioClientBeTxOp.0 radioClientBeTxOp.1 2.4 and 5 GHz TXOP Limit for Best Effort queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.26.0 i 30000
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.26.1 i 30000
[0; 65535] .1.3.6.1.4.1.35265.1.127.5.1.2.1.27.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.27.1 INTEGER radioClientViAifs.0 radioClientViAifs.0 2.4 and 5 GHz AIFS for Video queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.27.0 i 128
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.27.1 i 128
[1; 255] .1.3.6.1.4.1.35265.1.127.5.1.2.1.28.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.28.1 INTEGER radioClientViCwMin.0 radioClientViCwMin.1 2.4 and 5 GHz cwMin for Video queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.28.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.28.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.29.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.29.1 INTEGER radioClientViCwMax.0 radioClientViCwMax.1 2.4 and 5 GHz cwMax for Video queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.29.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.29.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.30.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.30.1 INTEGER radioClientViTxOp.0 radioClientViTxOp.1 2.4 and 5 GHz TXOP Limit for Video queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.30.0 i 30000
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.30.1 i 30000
[0; 65535] .1.3.6.1.4.1.35265.1.127.5.1.2.1.31.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.31.1 INTEGER radioClientVoAifs.0 radioClientVoAifs.1 2.4 and 5 GHz AIFS for Voice queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.31.0 i 128
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.31.1 i 128
[1; 255] .1.3.6.1.4.1.35265.1.127.5.1.2.1.32.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.32.1 INTEGER radioClientVoCwMin.0 radioClientVoCwMin.1 2.4 and 5 GHz cwMin for Voice queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.32.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.32.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.33.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.33.1 INTEGER radioClientVoCwMax.0 radioClientVoCwMax.1 2.4 and 5 GHz cwMax for Voice queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.33.0 i 127
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.33.1 i 127
"1, 3, 7, 15, 31, 63, 127, 255, 511, 1023" .1.3.6.1.4.1.35265.1.127.5.1.2.1.34.0 .1.3.6.1.4.1.35265.1.127.5.1.2.1.34.1 INTEGER radioClientVoTxOp.0 radioClientVoTxOp.1 2.4 and 5 GHz TXOP Limit for Voice queue
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.34.0 i 30000
# snmpset -v 2c -c private 192.169.31.47 .1.3.6.1.4.1.35265.1.127.5.1.2.1.34.1 i 30000
[0; 65535] VAP configuration .1.3.6.1.4.1.35265.1.127.5.2.1.1.1(.0-7) OctetString vapInterface List of interfaces allowed for editing (read only) The parameter is not available for editing, read only. [ "wlanX-va0" - "wlanX-va3" ] where X : "0" for 2.4 GHz "1" for 5 GHz
.1.3.6.1.4.1.35265.1.127.5.2.1.1.2(.0-7) INTEGER vapEnable Enable VAP
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.2.0 i 1
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.2.7 i 0
"0" — disable "1" — enable .1.3.6.1.4.1.35265.1.127.5.2.1.1.3(.0-7) INTEGER vapVlanTrunk Enable Vlan Trunk
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.3.0 i 1
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.3.7 i 0
"0" — disable "1" — enable
.1.3.6.1.4.1.35265.1.127.5.2.1.1.4(.0-7) INTEGER vapVlanId VLAN number to untag when transmitting Wi-Fi traffic to clients
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.4.0 i 15
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.4.7 i 0
[1; 4094 ]
"0" — disabling VLAN ID on VAP
.1.3.6.1.4.1.35265.1.127.5.2.1.1.5(.0-7) INTEGER vapGeneralVlanMode Enabling General Mode
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.5.0 i 1
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.5.7 i 0
"0" — disable "1" — enable
.1.3.6.1.4.1.35265.1.127.5.2.1.1.6(.0-7) INTEGER vapGeneralVlanId VLAN number to untag when transmitting Wi-Fi traffic to clients
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.6.0 i 2354
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.6.7 i 0
[1; 4094 ]
"0" — disabling General VLAN ID on VAP
.1.3.6.1.4.1.35265.1.127.5.2.1.1.7(.0-7) OctetString vapVlanPriority 802.1p priority
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.7.0 s 5
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.7.7 s auto
"auto", [ 0; 7 ] .1.3.6.1.4.1.35265.1.127.5.2.1.1.8(.0-7) INTEGER vapStaLimit Limiting number of clients on VAP
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.8.0 i 10
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.8.7 i 0
[0; 64]
"0" — no limit on the number of clients connected to the VAP
.1.3.6.1.4.1.35265.1.127.5.2.1.1.9(.0-7) INTEGER vapInactivityTimeout Client disconnect timeout due to inactivity
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.9.0 i 150
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.9.7 i 150
[0; 2000000] .1.3.6.1.4.1.35265.1.127.5.2.1.1.10(.0-7) OctetString vapSsid SSID name
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.10.0 s Test-FBWA
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.10.7 s Test-FBWA
String, maximum length — 32 characters. Example: "WOP-2L" .1.3.6.1.4.1.35265.1.127.5.2.1.1.11(.0-7) OctetString vapSecurityMode Security mode
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.11.0 s WPA_WPA2_1X
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.11.7 s WPA2
"off","WPA","WPA2","WPA_WPA2", "WPA_1X","WPA2_1X","WPA_WPA2_1X"
.1.3.6.1.4.1.35265.1.127.5.2.1.1.12(.0-7) OctetString vapKeyWep WEP key
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.12.0 s 1257qqw
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.12.7 s 1257qqw
String length from 5 to 13 characters .1.3.6.1.4.1.35265.1.127.5.2.1.1.13(.0-7) OctetString vapKeyWpa WPA key
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.13.0 s 12345678
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.13.7 s 12345678
String length from 8 to 63 characters .1.3.6.1.4.1.35265.1.127.5.2.1.1.14(.0-7) INTEGER vapStationIsolation Client isolation on VAP
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.14.0 i 1
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.14.7 i 0
"0" — disable "1" — enable
.1.3.6.1.4.1.35265.1.127.5.2.1.1.15(.0-7) INTEGER vapPriorityByDscp Selecting traffic prioritization method: via DSCP or 802.1p
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.15.0 i 1
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.15.7 i 0
"1" — DSCP
"0" — 802.1p
.1.3.6.1.4.1.35265.1.127.5.2.1.1.18(.0-7) OctetString vapShaperVapTxMode Configuring shaper in direction from access point to clients (in total), connected to this VAP
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.18.0 s kbps
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.18.7 s off
"off" — shaper is disabled;
"kbps" — configuring shaping, kbps;
"pps" — configuring shaping, pps.
.1.3.6.1.4.1.35265.1.127.5.2.1.1.19(.0-7) INTEGER vapShaperVapTxValue Shaper value
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.19.0 i 20000
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.19.7 i 20000
[ 0; 2000000000] .1.3.6.1.4.1.35265.1.127.5.2.1.1.20(.0-7) OctetString vapShaperVapRxMode Configuring shaper in direction from clients (in total) connected to this VAP to the access point
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.20.0 s kbps
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.20.7 s off
"off" — shaper is disabled;
"kbps" — configuring shaping, kbps;
"pps" — configuring shaping, pps.
.1.3.6.1.4.1.35265.1.127.5.2.1.1.21(.0-7) INTEGER vapShaperVapRxValue Shaper value
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.21.0 i 20000
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.21.7 i 20000
[ 0; 2000000000] .1.3.6.1.4.1.35265.1.127.5.2.1.1.22(.0-7) OctetString vapShaperStaTxMode Configuring shaper in direction from access point to clients (separately) connected to this VAP
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.22.0 s kbps
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.22.7 s off
"off" — shaper is disabled;
"kbps" — configuring shaping, kbps;
"pps" — configuring shaping, pps.
.1.3.6.1.4.1.35265.1.127.5.2.1.1.23(.0-7) INTEGER vapShaperStaTxValue Shaper value
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.23.0 i 20000
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.23.7 i 20000
[ 0; 2000000000] .1.3.6.1.4.1.35265.1.127.5.2.1.1.24(.0-7) OctetString vapShaperStaRxMode Configuring shaper in direction from clients (separately) connected to this VAP to the access point
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.24.0 s kbps
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.24.7 s off
"off" — shaper is disabled;
"kbps" — configuring shaping, kbps;
"pps" — configuring shaping, pps.
.1.3.6.1.4.1.35265.1.127.5.2.1.1.25(.0-7) INTEGER vapShaperStaRxValue Shaper value
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.25.0 i 20000
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.25.7 i 20000
[ 0; 2000000000] .1.3.6.1.4.1.35265.1.127.5.2.1.1.26(.0-7) INTEGER vapRadiusAuthPort Radius server port used for authentication and authorization
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.26.0 i 1812
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.26.7 i 1812
[0; 65535] .1.3.6.1.4.1.35265.1.127.5.2.1.1.27(.0-7) OctetString vapRadiusAuthAddress Radius server address used for authentication and authorization
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.27.0 s 192.168.0.152
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.27.7 s 192.168.0.152
Radius server IP address .1.3.6.1.4.1.35265.1.127.5.2.1.1.28(.0-7) OctetString vapRadiusAuthPassword Radius server password used for authentication and authorization
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.28.0 s secret
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.28.7 s secret
String from 1 to 64 characters .1.3.6.1.4.1.35265.1.127.5.2.1.1.29(.0-7) INTEGER vapRadiusTlsEnable Enabling TLS
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.29.0 i 1
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.29.7 i 0
"0" — disable "1" — enable
.1.3.6.1.4.1.35265.1.127.5.2.1.1.30(.0-7) INTEGER vapRadiusAcctEnable Enabling Radius Accounting sending
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.30.0 i 1
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.30.7 i 0
"0" — disable "1" — enable
.1.3.6.1.4.1.35265.1.127.5.2.1.1.31(.0-7) INTEGER vapRadiusAcctPort Radius server port used for Accounting reception
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.31.0 i 1813
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.31.7 i 1813
[0; 65535] .1.3.6.1.4.1.35265.1.127.5.2.1.1.32(.0-7) OctetString vapRadiusAcctAddress Radius server address used for Accounting reception
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.32.0 s 192.168.0.152
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.32.7 s 192.168.0.152
Radius server IP address .1.3.6.1.4.1.35265.1.127.5.2.1.1.33(.0-7) OctetString vapRadiusAcctPassword Radius server password used for Accounting reception
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.33.0 s secret
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.33.7 s secret
String from 1 to 64 characters
.1.3.6.1.4.1.35265.1.127.5.2.1.1.34(.0-7) INTEGER vapRadiusAcctPeriodic Periodic Accounting sending
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.34.0 i 1
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.34.7 i 0
"0" — disable "1" — enable
.1.3.6.1.4.1.35265.1.127.5.2.1.1.35(.0-7) INTEGER vapRadiusAcctInterval Accounting sending interval
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.35.0 i 600
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.35.7 i 600
[0; 86400] .1.3.6.1.4.1.35265.1.127.5.2.1.1.36(.0-7) OctetString vapRadiusDomain Domain
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.36.0 s eltex.root
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.36.7 s eltex.root
String from 1 to 253 characters .1.3.6.1.4.1.35265.1.127.5.2.1.1.37(.0-7) INTEGER vapRadiusDebug Enabling Radius debugging
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.37.0 i 1
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.37.7 i 0
"0" — disable "1" — enable
.1.3.6.1.4.1.35265.1.127.5.2.1.1.38(.0-7) OctetString vapRadiusLogfile Location and name of the file used for Radius logging
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.38.0 s "/var/log/radius-wlan0-va1.log"
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.38.7 s "/var/log/radius-wlan0-va1.log"
" /var/log/radius-wlan0-va1.log" .1.3.6.1.4.1.35265.1.127.5.2.1.1.39(.0-7) INTEGER vapRadiusLogfileLimit Size of the file used for Radius logging, in bytes
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.39.0 i 1500
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.39.7 i 1500
[0; 30000] .1.3.6.1.4.1.35265.1.127.5.2.1.1.40(.0-7) INTEGER vapPortalEnable Enabling portal authorization
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.40.0 i 1
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.40.7 i 0
"0" — disable
"1" — enable
.1.3.6.1.4.1.35265.1.127.5.2.1.1.41(.0-7) STRING vapVirtualPortalName Virtual portal name
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.41.0 s 'default'
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.41.7 s 'default'
String .1.3.6.1.4.1.35265.1.127.5.2.1.1.42(.0-7) STRING vapRedirectUrl Address for redirecting
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.42.0 s 'http://192.168.1.17:8080/eltex_portal/'
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.2.1.1.42.7 s 'http://192.168.1.17:8080/eltex_portal/'
String of the following type: 'http://<IP>:<PORT>/eltex_portal/'
WDS configuration .1.3.6.1.4.1.35265.1.127.5.1.1.1.17.0
INTEGER radioConfigWdsEnable.0 Enabling 2.4 GHz WDS
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.17.0 i 1
"0" — disable
"1" — enable
.1.3.6.1.4.1.35265.1.127.5.1.1.1.17.1 INTEGER radioConfigWdsEnable.1 Enabling 5 GHz WDS
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.17.1 i 1
"0" — disable
"1" — enable
.1.3.6.1.4.1.35265.1.127.5.1.1.1.18.0 STRING radioConfigWdsSecurityMode.0 2.4 GHz encryption mode
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.18.0 s WPA2
'off' 'WPA2' 'WPA'
.1.3.6.1.4.1.35265.1.127.5.1.1.1.18.1 STRING radioConfigWdsSecurityMode.1 5 GHz encryption mode
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.18.1 s WPA2
'off' 'WPA2' 'WPA'.1.3.6.1.4.1.35265.1.127.5.1.1.1.19.0 STRING radioConfigWdsKeyWep.0 WEP 2.4 GHz key
# snmpset -v 2c -c private 100.110.1.46 .1.3.6.1.4.1.35265.1.127.5.1.1.1.19.0 s 1234s
5 or 13 characters .1.3.6.1.4.1.35265.1.127.5.1.1.1.19.1 STRING radioConfigWdsKeyWep.1 WEP 5 GHz key
# snmpset -v 2c -c private 100.110.1.46 .1.3.6.1.4.1.35265.1.127.5.1.1.1.19.1 s 1234s
5 or 13 characters .1.3.6.1.4.1.35265.1.127.5.1.1.1.20.0 STRING radioConfigWdsKeyWpa.0 2.4 GHz WPA key
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.20.0 s 12345678
String from 8 to 63 characters .1.3.6.1.4.1.35265.1.127.5.1.1.1.20.1 STRING radioConfigWdsKeyWpa.1 5 GHz WPA key
# snmpset -v 2c -c private 192.169.31.15 .1.3.6.1.4.1.35265.1.127.5.1.1.1.20.1 s 12345678
String from 8 to 63 characters WDS links configuration
WDS links table
.1.3.6.1.4.1.35265.1.127.5.3
.1.3.6.1.4.1.35265.1.127.5.3.1.1.2(.0-7)
INTEGER wdsLinkEnable Enabling WDS link
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.3.1.1.2.0 i 1
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.3.1.1.2.7 i 0
"0" — disable
"1" — enable
.1.3.6.1.4.1.35265.1.127.5.3.1.3(.0-7) INTEGER wdsMtu MTU for link
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.3.1.1.3.0 i 1600
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.3.1.1.3.7 i 1600
[1; 2490] .1.3.6.1.4.1.35265.1.127.5.3.1.4(.0-7) STRING wdsMac Remote MAC address
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.3.1.1.4.0 s "e8:28:c1:03:cc:bb"
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.3.1.1.4.7 s "e8:28:c1:03:cc:bb"
MAC address of the remote device
Entry format:
Use colon as separator. Use only lowercase letters. .1.3.6.1.4.1.35265.1.127.5.3.1.5(.0-7) STRING wdsTxRate Static TX modulation
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.3.1.1.5.0 s "NSS2-MCS0"
# snmpset -v 2c -c private 192.168.0.27 .1.3.6.1.4.1.35265.1.127.5.3.1.1.5.7 s "NSS2-MCS0"
'auto'
OFDM[6,9,12,18,24,36,48,54]
MCS[0...15]
NSS[1,2]-MCS[0...9] - 5 ГГц
SNMP configuration .1.3.6.1.4.1.35265.1.127.5.11.1.0 INTEGER snmpEnable Enabling use of SNMP
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.11.1.0 i 1 iso.3.6.1.4.1.35265.1.127.5.11.1.0 = INTEGER: 1
"0" — disable
"1" — enable
.1.3.6.1.4.1.35265.1.127.5.11.2.0 OctetString snmpRoCommunity Password for parameters reading
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.11.2.0 s public
.1.3.6.1.4.1.35265.1.127.5.11.3.0 OctetString snmpRwCommunity Password for parameters writing
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.11.3.0 s private
.1.3.6.1.4.1.35265.1.127.5.11.4.0 OctetString snmpTrapSink IP address or domain name of the SNMPv1-trap messages receiver
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.11.4.0 s 192.169.4.100
IP address in xx.xx.xx.xx format .1.3.6.1.4.1.35265.1.127.5.11.5.0 OctetString snmpTrap2Sink IP address or domain name of the SNMPv2-trap messages receiver
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.11.5.0 s 192.169.4.100
IP address in xx.xx.xx.xx format .1.3.6.1.4.1.35265.1.127.5.11.6.0 OctetString snmpInformSink IP address or domain name of the Inform messages receiver
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.11.6.0 s 192.169.4.100
IP address in xx.xx.xx.xx format .1.3.6.1.4.1.35265.1.127.5.11.7.0 OctetString snmpSysname Device name
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.11.7.0 s "WEP-2L"
.1.3.6.1.4.1.35265.1.127.5.11.8.0 OctetString snmpContact Device manufacturer contact information
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.11.8.0 s Contact
.1.3.6.1.4.1.35265.1.127.5.11.9.0 OctetString snmpLocation Device location information
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.11.9.0 s Russia
.1.3.6.1.4.1.35265.1.127.5.11.10.0 OctetString snmpTrapCommunity Password in traps
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.11.10.0 s trap
.1.3.6.1.4.1.35265.1.127.5.11.11.0 INTEGER snmpDebug Enabling SNMP logging
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.11.11.0 i 1
"0" — disable
"1" — enable
.1.3.6.1.4.1.35265.1.127.5.11.12.0 OctetString snmpLogfile Path to SNMP logs
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.11.12.0 s /var/log/snmp.log
Path in /dir/subdir/filename .1.3.6.1.4.1.35265.1.127.5.11.13.0 INTEGER snmpLogfileLimit Log file size
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.11.13.0 i 1000
[0; 30000] Syslog agent configuration .1.3.6.1.4.1.35265.1.127.5.14.1.0 INTEGER syslogEnable Enabling Syslog agent
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.14.1.0 i 1
"0" — disable
"1" — enable
.1.3.6.1.4.1.35265.1.127.5.14.2.0 OctetString syslogMode Syslog agent operation mode
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.14.2.0 s File
'File' — Syslog writing to a local file on the device.
'ServerAndFile' — Syslog writing to a local file on the device and Syslog sending to a remote Syslog server.
.1.3.6.1.4.1.35265.1.127.5.14.3.0 INTEGER syslogFileSize Syslog file size
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.14.3.0 i 1000
[1; 1000] .1.3.6.1.4.1.35265.1.127.5.14.4.0 INTEGER syslogPort Port for incoming Syslog server messages
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.14.4.0 i 514
[1; 65535]
By default 514, required for "Server and file" mode
.1.3.6.1.4.1.35265.1.127.5.14.5.0 OctetString syslogServer Syslog server IP address
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.14.5.0 s 192.169.4.100
IP address in xx.xx.xx.xx format
Required for "Server and file" mode
Access options configuration .1.3.6.1.4.1.35265.1.127.5.6.1.0 OctetString adminPassword Access password to the device
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.6.1.0 s password iso.3.6.1.4.1.35265.1.127.5.6.1.0 = STRING: "password"
Netconf configuration .1.3.6.1.4.1.35265.1.127.5.8.1.0 INTEGER netconfEnable Enabling Netconf on the device
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.8.1.0 i 1
"0" — disable
"1" — enable
.1.3.6.1.4.1.35265.1.127.5.8.2.0 INTEGER netconfDebug Enabling Netconf logging
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.8.2.0 i 1
"0" — disable
"1" — enable
.1.3.6.1.4.1.35265.1.127.5.8.3.0 OctetString netconfLogfile Path to Netconf log file
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.8.3.0 s /var/log/netconf.log
Path in /dir/subdir/filename format .1.3.6.1.4.1.35265.1.127.5.8.4.0 INTEGER netconfLogfileLimit Netconf log file size
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.8.4.0 i 1000
[0; 30000] Date and time configuration .1.3.6.1.4.1.35265.1.127.5.7.1.0 OctetString dateTimeMode Configuring date and time (auto/manually)
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.7.1.0 s ntp
'ntp' — setting time via NTP time synchronization protocol
'manual' — manual time configuration on the device
.1.3.6.1.4.1.35265.1.127.5.7.2.0 OctetString timeZone Time zone
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.7.2.0 s "Europe/Moscow (Moscow,Russia)"
'Europe/Moscow (Moscow,Russia)'
'Europe/Helsinki (Helsinki,Finland)'
'Asia/Novosibirsk (Novosibirsk)'
etc.
.1.3.6.1.4.1.35265.1.127.5.7.3.0 INTEGER dstEnable Enabling daylight saving time
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.7.3.0 i 1
"0" — disable
"1" — enable
.1.3.6.1.4.1.35265.1.127.5.7.4.0 OctetString dstStart Starting daylight saving time
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.7.4.0 s january.first.monday/00:02
String of a format: "month.numeral.week_day/hours:minutes"
numeral — first, second, third, fourth, last
.1.3.6.1.4.1.35265.1.127.5.7.5.0 OctetString dstEnd Ending daylight saving time
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.7.5.0 s december.last.sunday/21:15
String of a format: "month.numeral.week_day/hours:minutes"
numeral — first, second, third, fourth, last
.1.3.6.1.4.1.35265.1.127.5.7.6.0 INTEGER dstOffset Time offset in minutes
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.7.6.0 i 60
[0; 720] .1.3.6.1.4.1.35265.1.127.5.7.7.0 OctetString manualSystemTime System date and time (manual)
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.7.7.0 s "1999-01-01 00:00:00"
String of a format:
"year-month-day hours:minutes:seconds"
.1.3.6.1.4.1.35265.1.127.5.7.8.0 OctetString ntpServer Internal clock synchronization server
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.7.8.0 s pool.ntp.org
IP address or domain name of the NTP server Telnet configuration .1.3.6.1.4.1.35265.1.127.5.5.1.0 INTEGER telnetEnable Enabling access to the device via Telnet protocol
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.5.1.0 i 1
"0" — disable
"1" — enable
.1.3.6.1.4.1.35265.1.127.5.5.2.0 INTEGER telnetPort Assigning Telnet port
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.5.2.0 i 23
[0; 65535] SSH configuration .1.3.6.1.4.1.35265.1.127.5.4.1.0 INTEGER sshEnable Enabling access to the device via SSH protocol
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.4.1.0 i 1
"0" — disable
"1" — enable
.1.3.6.1.4.1.35265.1.127.5.4.2.0 INTEGER sshPort Assigning SSH port
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.4.2.0 i 22
[0; 65535] System parameters configuration .1.3.6.1.4.1.35265.1.127.5.12.1.0 INTEGER systemGlobalStationIsolation Global isolation
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.12.1.0 i 1
"0" — disable
"1" — enable
.1.3.6.1.4.1.35265.1.127.5.12.2.0 OctetString systemHostname Device name
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.12.2.0 s WEP-2L-NEW
.1.3.6.1.4.1.35265.1.127.5.12.3.0 OctetString systemApLocation Node domain (AP Location) of the EMS management system device tree, where access point is located
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.12.3.0 s root
Automatic log files download configuration .1.3.6.1.4.1.35265.1.127.5.15.1.0 INTEGER autologPeriod Period of automatic downloading of log files from the /var/log/ directory in seconds
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.15.1.0 i 10
[0; 86400]
"0" — automatic log files download is enabled
.1.3.6.1.4.1.35265.1.127.5.15.2.0 OctetString autologServerAddress IP address of the server to which log files should be downloaded from the device
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.15.2.0 s 192.169.4.100
IP address in xx.xx.xx.xx format .1.3.6.1.4.1.35265.1.127.5.15.3.0 INTEGER autologFileSize Maximum size of log file in KB
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.15.3.0 i 10000
[0; 20000] .1.3.6.1.4.1.35265.1.127.5.15.4.0 OctetString autologProtocol Download protocol
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.15.4.0 s tftp
"tftp" .1.3.6.1.4.1.35265.1.127.5.15.5.0 INTEGER autologRetryCount Number of retries to automatically send log files in case of failure
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.15.5.0 i 3
[0; 5] APB configuration .1.3.6.1.4.1.35265.1.127.5.16.2.0 STRING captivePortalApIpAlias Portal address that is displayed in user's browser
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.16.2.0 s redirect.loc
It is not recommended to change this value. .1.3.6.1.4.1.35265.1.127.5.16.3.0 INTEGER captivePortalApbEnable Enabling APB service
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.16.3.0 i 1
"1" — enable
"0" — disable
.1.3.6.1.4.1.35265.1.127.5.16.4.0 STRING captivePortalApbUrl APB service address
# snmpset -v 2c -c private 192.169.4.150 .1.3.6.1.4.1.35265.1.127.5.16.4.0 s 'ws://192.168.1.1:8090/apb/broadcast'
String of a format:
'ws://<IP address of the APB server>:8090/apb/broadcast'