Basic section
Click on the name of the camera.
There are 2 main sections in camera editing:
- Basic;
- Archive recording.
The following settings can be configured in the section:
- Camera name — text field to designate the camera;
- Camera status — enable/disable the camera;
- Camera location — drop-down list provides a hierarchy, the camera location must match the Input to relay parameter that is to be managed when using the analytics model;
- Main stream link — URL that points to the main video stream that provides the highest possible quality, used to display the video full screen;
- Additional stream link — URL that points to an additional video stream that provides the video in the lowest quality, used to display the preview.
It is also possible to view information about the main or additional stream. The type of information can be switched using the Video and Audio buttons.
Archive recording section
This section is used to configure recording to the camera's archive.
Data from the camera is recorded without using the SD card in the camera to the server in the partition specified in the evi-archive.conf configuration file. |
Configuration parameters:
- Storage, days — number of days that archive records are stored;
- Prebuffer, seconds — number of seconds of recording before the start of an event (this setting is designed to work with the analytics module);
- Permanent record — type of permanent recording.
The system offers three types of continuous recording. The default setting is Disable. - Disable — permanent recording is not performed to the archive;
- Enable — permanent recording is performed to the archive;
- By schedule — permanent recording to the archive is performed at specified intervals.
|
Configuration examples for permanent archiving
- Disable — schedule is empty.
- Enable — automatically fills the week with blue.
- By schedule — an archive mode in which it is possible to select an archive recording of any type lasting from one hour for the entire week.
- Filling an empty cell — left mouse button;
- Deleting a filled cell — left mouse button;
- Calling up the context menu — right mouse button;
The minimum allocated area is a multiple of 1 hour. |
Context menu
Use the context menu to copy the schedule between different days.
Context menu functions: - Copy — the daily schedule in which the context menu was called will be copied;
- Patse — the current daily schedule will be replaced with the copied schedule from the buffer;
- Delete daily schedule — the daily schedule will be completely cleared.
The minimum allocated area is a multiple of 1 hour. |
When using the Paste button in the daily schedule, the current daily schedule will be replaced with the copied schedule from the clipboard. |
To clear the entire schedule area, use the Reset button.
To save your settings, click the Save button at the bottom right of the screen.
Removing a camera
When the camera is removed, the entire video archive is automatically deleted. |
There are two ways of removing the camera:
- Via three dots at the camera name in the Cameras table;
- Via the Delete camera button in the upper right corner of the camera editing page.
In the pop-up window, confirm the deletion by clicking Delete.
