...

1. Connect cables to corresponding connector of the device.
   Description of the connectors is given in Design section of the User manual.
2. Align the device and bracket together, fix the position, turning clockwise. 

...

1. Fasten metal and plastic bracket on a ceiling as shown in the figure 9.
   1. The plastic bracket (3) should be joined with the metal one (1) on the ceiling in the following order: metal bracket -> Armstrong panel -> plastic bracket.
   2. Cut the hole in the Armstrong panel. The size of the hole should be equal to hole of metal bracket. Conduct wires through the hole.
   3. Align holes in metal bracket with holes of Armstrong panel and plastic bracket. Align together three screw holes on the plastic bracket and the screw holes on the metal bracket. Screw the brackets to the device surface by using a screwdriver.
2. Install the device.
   1. Connect cables to corresponding connector of the device. Description of the connectors is given in Design section of the User manual.
   2. Align the device and plastic bracket together, fix the position, turning clockwise.

...

For more detailed information, it is recommended to read the complete user manual.

Cluster operating mode

The cluster operation mode allows managing devices in a cluster simultaneously, which sufficiently improves operation efficiency while deploying, configuring or exploiting a wireless network.

...