...
| Interfaces | |
|---|---|
| Memory card | 1 × MicroSD/SDHC/SDXC up to 128 256 GB |
| Ethernet | 1 × 10/100BASE-T (RJ-45), support for PoE |
| Sensor | |
| Type | 1/3” progressive scan CMOS |
| Effective pixels | 4 M |
| Lens and illumination | |
| Focal distance | 2.8 mm |
| Aperture | F/2.0 |
| Field of view (horizontal) | 100° |
| Field of view (diagonal) | 116° |
| Angle adjustment (tilt) | from 0° to 90° |
| Angle adjustment (rotate) | from 0° to 360° |
| IR illumination | yes |
| IR range | up to 30 40 m |
Scroll Pagebreak
| Image | |
|---|---|
| Image | color |
| Maximum resolution | 2560 × 1440 |
| Maximum frame rate | 25 fps |
| Bit rate | up to 10 Mbps |
| Video compression | H.264, H.265 |
| Image quality improvement | BLC, HLC, DWDR, ANTI-FLICKER, DEFOG |
| Signal-to-noise ratio | no less than 50 dB |
| Minimum illumination | color: 0,03 02 lx, bw: 0 lx with IR |
| Audio | |
| Built-in microphone | yes |
| Built-in dynamic | noyes |
| Audio compression | PCM, AAC, MP2 |
| Voice pickup distance | up to 5 m |
| Physical specifications | |
| Power supply | 12 V DC, PoE 802.3af |
| RAM | 128 MB |
| Form factor | cylindrical camera |
| Mount options | indoor and outdoor |
| Dimensions (W × H × D) | 70 × 67 × 186 mm |
| Weight | 0.38 kg |
| Operating temperature | from -40 to +60° |
| Operating humidity | no more than 90 % (non-condensing) |
| Ingress protection | IP67 |
| Lifetime | no less than 5 years |
...
Managing the device via the web interface
Getting started
1. Connect the camera to your local network.
2. Open a web browser and enter the IP address of the device obtained from the DHCP server in the address bar.
3. The authorization page will be displayed in the browser window. Enter your username and password in the appropriate fields. (The default login name is admin and password is password).
...
...
4. Click the "Sign In" button. The "Video Watching" page will open in the browser window.
...
"Video Watching" menu
...
- Day&Night — IR illumination mode selection:
- Auto — automatic switching between day and night mode based on light level;
- Day — IRillumination is always off;
- Night — IR illumination is always on.
- Image orientation control — camera image control:
- Default — camera renders the image as the user sees it with their eyes;
- Vertical Flip — image is mirrored along the vertical axis;
- Horizontal Flip — image is mirrored along the horizontal axis;
- 180 Rotation — image is mirrored vertically and horizontally, thus providing an image as in the "Standard" mode for a physically inverted camera.
- Default — camera renders the image as the user sees it with their eyes;
...
"Video settings" menu
"Stream settings" submenu
- Streams:
- Main — primary stream, the best broadcast quality;
- Secondary — secondary stream, average broadcast quality;
- Mobile — mobile stream, poor broadcast quality.
- Main — primary stream, the best broadcast quality;
- Stream parameters:
- Resolution — selection of resolution of the image broadcast from the camera. The maximum resolution is 2560 × 1440.
- Codec — selection of video compression standard:
- H.264;
- H.265.
- Frame per second — number of frames that will be transmitted in one second. Maximum frequency — 25 fps;
- Rate control mode — mode of stream encoding:
- Constant bitrate — mode where the stream has a constant bitrate set in the "Bitrate" field;
- Variable bitrate — mode where the stream has a variable bitrate. Bitrate is varied by the complexity of the image, but does not exceed the "Maximum bitrate" value, and adheres to the "Bitrate" value.
- Bitrate — amount of information transmitted by the camera. Increasing this parameter proportionally increases the quality of the transmitted image.
Click the "Apply" button to save the settings.
"RTSP" submenu
- Stream params — section for configuring RTSP broadcasting:
- Audio — enable and disable audio in the stream;
- Enabled — enable and disable the stream;
- Stream URL — link to the selected stream considering the "Login", "Password" and "Port" fields of the "General parameters" section;
- Audio — enable and disable audio in the stream;
- Common params:
- Login — user name up to 63 Latin alphabet characters and digits;
- Password — user password up to 63 Latin alphabet characters and digits;
- Port — port to receive stream from RTSP server.
Click the "Apply" button to save the settings.
"System Log" menu
- Download log — download system log;
- Remote logging — section for configuring logs to a remote server:
- Syslog server — address of the remote syslog server.
Click the "Apply" button to save the settings.scroll-pagebreak
"System settings" menu
"Device Information" submenu
- Model — name of the device model;
- Serial Number — serial number of the device;
- MAC Address — MAC address of the device;
- Firmware Version — current firmware version of the device.
"
...
Сonfiguration" submenu
- Configuration — section for working with the device configuration:
- Load the Device Configuration from a File — select a file from which the camera will load its configuration;
- Save the Device Configuration to a File — download device configuration for further use.
- Reboot By Timer — section to configure an automatic weekly reboot:
- Day — day of the week when the reboot is performed;
- Time — exact time when the reboot is performed.
- Device Management:
- Reboot Device;
- Flush Recorder;
- Reset to Factory Default Settings.
Click the "Apply" button to save the settings.
"Date And Time" submenu
- Time — time on the camera. It can be edited if synchronization is not enabled;
- Timezone — time zone on the camera;
- NTP Server Synchronization — enable synchronization by NTP.
Click the "Apply" button to save the settings.scroll-pagebreak
"Network Settings" menu
...
- Mode:
- Auto — receiving all settings via DHCP;
- Manual — setting all network settings manually:
- IP Address;
- Network Mask;
- Dns List — DNS servers addresses;
- + — adding a backup DNS server;
- Default Gateway.
Click the "Apply" button to save the settings.
Scroll Pagebreak
"Firmware Upgrade" menu
- Firmware URI — URI link that allows the camera to download the firmware for upgrading.
Click the "Start Upgrading" button to start the upgrade.