...
- IP Address – IP address of the connected device;
- Host name – network name of the connected device;
- SNR, dB – signal-to-noise ratio;
- Transmit Rate – modulation and channel rate when transmitting;
- Receive Rate – modulation and channel rate at reception;
- Режим IEEE 802.11 – wireless network standard;
- Authorized – client's authorization status;
- Domain – domain to which the user belongs;
- link Quality – parameter that displays the status of the link to the client, calculated based on the number of retransmitted packets sent to the client. The maximum value is 100% (all transmitted packets were sent on the first attempt), the minimum value is 0% (no packets were successfully sent to the client). The value of the parameter is calculated for the last 10 seconds;
- Link Quality Common – parameter that displays the state of the link to the client, calculated based on the number of retransmitted packets sent to the client. The maximum value is 100% (all transmitted packets were sent on the first attempt), the minimum value is 0% (no packets were successfully sent to the client). The value of the parameter is calculated for the whole time of client connection;
- Actual Transmit Rate, Kbit/s – actual speed of traffic transmission at the moment;
- Actual Receive Rate, Kbit/s – actual rate of traffic reception at the moment;
- Transmit, bytes – number of bytes transmitted to the connected device;
- Receive, bytes – number of bytes received from the connected device;
- Transmit, packets – number of packets transmitted to the connected device;
- Receive, packets – number of packets received from the connected device;
- Uptime – time of connection with Wi-Fi client;
- Transmit Bandwidth, MHz – channel frequency bandwidth on which the radio interface operates during transmission;
- Receive Bandwidth, MHz – channel frequency bandwidth on which the radio interface operates during receiving.
Scroll Pagebreak
RRM ReportsЯкорь rrm rrm
| rrm | |
| rrm |
The page displays optimization reports. By default, the last report is displayed. Select the required report date using the calendar.
...
- Interface – interface name;
- MAC Address – interface MAC address;
- Operation state – activity status of the interface;
- Link Speed, Kbit/s – connection rate at the physical layer, which is used at the moment;
- Actual Rx/Tx Rate, Kbit/s – actual rate of traffic transmission at the moment;
- Rx/Tx, bytes – number of bytes received/transmitted to the connected device;
- Rx/Tx, packets – number of packets received/transmitted to the connected device;
- Rx/Tx drops, packets – number of packets discarded on reception/transmission;
- Rx/Tx errors – number of packets received/transmitted with errors to the connected device;
- Duplex – duplex operation mode on the interface.
New Access
...
Points Якорь new AP new AP
| new AP | |
| new AP |
The page displays the access points that reached the controller and are waiting to be registered or are in the process of being registered.
...
Detailed information on working with the device configuration is described in the "Configuration" configuration section. After creating a profile, it will be displayed in the table of profiles "AP".
...