...
| Примечание |
|---|
All filter input fields should not be empty! Otherwise, buttons to add and remove a filter will be unavailable. |
How to use filters
...
- Go to the page with the table. There is one blank filter there by default.
- In the filter card, click the "Filter" field and select the name of the table to filter.
- Next, select the operation in the "Operation". CONTAINS or EQ operators are selected by default.
- In the "Value" field, enter the value to search for.
- Click the "Apply Filter" button. Lines matching the desired value will be displayed on the page.
- To return to the original state, delete all existing filters on the page using the "Remove filter" button, and then click "Apply filter."
...
This section allows to determine the connection of devices within the same group and monitor the availability of devices on the map.
| Scroll Pagebreak |
|---|
The section displays tools for managing network maps(1) and their list (2):
...
- Navigation Chain
- Device Management Tools:
- Add devices.
- Move — move the device to another group.
- Delete — remove the device from the system.
- Enable/Disable — in the "Disable" status the device stops being polled by the system, while all monitoring data and device configuration received earlier will be saved.
- Device table filter.
Scroll Pagebreak - A table with a list of devices that displays data on the status of devices belonging to the selected group:
- IP — IP address of the device. Displayed as a link that allows to go to the device management page.
- Maintenance — the maintenance status of the device in the system. If marked as 'ENABLED', then the device is fully serviced by the system (availability polling, metrics, configuration backup, management). In other cases, the maintenance functions may be suspended.
- Availability — the device availability status via TCP/ICMP, SNMP, SSH protocols.
- The duration of the current status is the time elapsed after the device status change. Calculated every time the table is updated.
- Triggers — the ratio of prompted triggers to the total number of triggers.
...
- Status — current status of the task.
- Type — essence of the task.
- Description — parameters the task was started with.
- Create date — date and time the task was created.
- Start date — date and time when the task was launched into active operation. It may not match the date of creation, because the task may be in the handler queue.
- Stop date — the date and time when the task was completed. In this case, the task may be completed successfully or not successfully.
- Log — open the task execution log from Ansible.
Scroll Pagebreak
Monitoring
Device monitoring data display.
...
- Navigation bar — displays currently selected group. Particularly this group will be saved to the user account after clicking the "Add" button.
Nested groups table — allows to select one of the child groups and move further down the tree.
Подсказка To return to the parent group, click on its name in the navigation bar.
- Cancel and save buttons.
Scroll Pagebreak
Roles
Interface for managing system user roles.
...