Замена конфигурации из файла на MES14xx/MES24xx

На коммутаторах MES1400/MES2400 реализован функционал замены running-config конфигурацией из файла в памяти коммутатора без перезагрузки.

replace running-config [flash:path]

Пример выполнения команды :

console#replace running-config flash:test.txt

This command will replace the current switch configuration. Do you want to continue? (Y/N)[N]
Writing running-config to file '/mnt/runningbackup.conf'...
Running-config written successfully
Calculating diff...
Applying diff commands... (step 1)
... 50%
... 100%

Applying diff commands... (step 2)

Applying diff commands... (step 3)
Cleaning up memory...

Commands that are not applied:
<empty>