v1.33_Quickstart по настройке Hotspot с портальной авторизацией

// Server configuration
server {
    port = 8040
}

sms {
    // Incoming (user to service) sms config
    incoming.config = "smpp.conf"
    // Outgoing (service to user) sms config
    outgoing.config = "smsc.conf"

    // Sms gateway pool settings
    pool {
        min = 1
        max = 20
        waitTimeout = 5s
    }
}

call {
    // Incoming (user to service) call config
    incoming.config = ""
    // Outgoing (service to user) call config
    outgoing.config = ""

    // Call gateway pool settings
    pool {
        min = 1
        max = 20
        waitTimeout = 5s
    }
}

email {
    // Outgoing (service to user) email config
    outgoing.config = "email.conf"

    pool {
        min = 1
        max = 20
        waitTimeout = 5s
    }

}

database {
    host = localhost
    port = 3306
    name = eltex_ngw
    user = javauser
    password = javapassword

    pool {
        // Time to wait for a connection
        connectionTimeout = 10s

        min = 1
        max = 10
    }

    // Configure the lifetime of different tables' content
    cleanup {
        // incoming events
        events = 365d
        // sms
        messages = 365d
        // email
        emails = 365d
        // files
        files = 7d
        // limit deletions by this number (0 if no limit)
        limit = 0
        // cleanup schedule cron-like expression, e.g. "0 0 3 ? * *"
        // set to "-" to disable
        cron = "-"
    }
}

connection {
  login = "test"		//Логин УЗ
  password = "pass123"	//Пароль УЗ
  protocol = http		//Протокол связи со шлюзом
}

common {
  sender = smsc			//Имя отправителя, отображаемое в телефоне получателя. Разрешены английские буквы, цифры, пробел. Длина – 11 символов или 15 цифр.
  use_translit = false	//Признак того, что сообщение необходимо перевести в транслит.
						//0 (по умолчанию) – не переводить в транслит.
						//1 – перевести в транслит в виде "translit".
						//2 – перевести в транслит в виде "mpaHc/Ium".
  charset = utf-8		//стандарт кодирования символов
}

connection {
  login = "test"
  password = "pass123"
  host = "smpp.smsc.ru"
  backup_host = "smpp2.smsc.ru"
  port = 3700

  // seconds between sending ENQUIRE_LINK packet to maintain connection with SMPP server
  // for SMSC SMPP 15 seconds is OK
  enquire_link_interval = 15s
  // Seconds waiting response from SMPP server on SUBMIT_SM packet
  transaction_interval = 5s
  // type of number for ESME address (UNKNOWN|INTERNATIONAL|
  // NATIONAL|NETWORK_SPECIFIC|SUBSCRIBER_NUMBER|ALPHANUMERIC|ABBREVIATED)
  esme_number_type = UNKNOWN
  // numbering plan indicator for ESME address (UNKNOWN|ISDN|
  // DATA|TELEX|LAND_MOBILE|NATIONAL|PRIVATE|ERMES|INTERNET|WAP)
  esme_numbering_plan_indicator = UNKNOWN
  // service type (|CMT|CPT|VMN|VMA|WAP|USSD)
  service_type = ""
  // source address type of number when sending (UNKNOWN stands for 0|INTERNATIONAL stands for 1|
  // NATIONAL - 2|NETWORK_SPECIFIC - 3|SUBSCRIBER_NUMBER - 4|ALPHANUMERIC - 5|ABBREVIATED - 6)
  source_addr_number_type = ALPHANUMERIC
  // source address numbering plan indicator when sending (UNKNOWN stands for 0|ISDN - 1|
  // DATA - 2|TELEX - 3|LAND_MOBILE - 4|NATIONAL - 5|PRIVATE - 6|ERMES - 7|INTERNET - 8|WAP - 9)
  source_addr_numbering_plan_indicator = ISDN
  // source address to indicate in smsc.ru log, you may set anything or leave empty, max length is 20 symbols
  // russian symbols will be translitirated
  source_addr = ""
  // destination address type of number when sending (UNKNOWN stands for 0|INTERNATIONAL - 1|NATIONAL - 2|
  // NETWORK_SPECIFIC - 3|SUBSCRIBER_NUMBER - 4|ALPHANUMERIC - 5|ABBREVIATED - 6)
  dest_addr_number_type = INTERNATIONAL
  // destination address numbering plan indicator when sending (UNKNOWN stands for 0|ISDN - 1|DATA - 2|
  // TELEX - 3|LAND_MOBILE - 4|NATIONAL - 5|PRIVATE - 6|ERMES - 7|INTERNET - 8|WAP - 9)
  dest_addr_numbering_plan_indicator = ISDN
  // replace message prefix with another one or nothing
  dest_addr_replace_prefix = ""
  dest_addr_replace_prefix_with = ""
  //  SMSC_DEST_ADDR_REPLACE_PREFIX_WITH=
  // protocol ID
  protocol_id = 0
  // flag shows priority of sms in smsc queue (0|1|2|3) 3 - the highest
  priority_flag = 3
  // encoding (1 stands for 8-bit ASCII|2 for UCS2 (UTF-16)|0 for 7-bit in data coding, but for text will be used UTF-8).
  // To send messages with cyrillic text use 2
  encoding = 2
  // encode text in win1251, but send data coding marker as defined above
  encode_to_win1251 = false
  // concat long text on smpp server into 1 message (TRUE|FALSE). May pay less money of concatting
  concat_long_text_on_server = true
  // ESME settings
  // MessageMode (DEFAULT stands for 0|DATAGRAM - 1|TRANSACTION - 2|STORE_AND_FORWARD - 3)
  message_mode = STORE_AND_FORWARD
  // MessageType (DEFAULT|ESME_DEL_ACK|ESME_MAN_ACK|SMSC_DEL_RECEIPT|SME_DEL_ACK|SME_MAN_ACK|CONV_ABORT|INTER_DEL_NOTIF)
  message_type = DEFAULT
  // GSMSpecificFeature (DEFAULT|UDHI|REPLYPATH|UDHI_REPLYPATH)
  gsm_specific_feature = DEFAULT
  // GeneralDataCoding settings
  // ignore these settings (for proper data coding 0x08, for ex.) (TRUE|FALSE)
  ignore_optional_data_coding_settings = true
  // compressed (FALSE|TRUE)
  compressed = false
  // messageClass (0|1|2|3)
  message_class = 1
}

common {
  incoming_sms_numbers = [79123456789]
  incoming_call_numbers = []
}