A web interface for device management is implemented on LTX series devices. The web interface is accessed by the IP address of the OLT in the control network. By default, the web interface is disabled for security reasons. Enabling access to the web interface is done through the CLI. Page navigation is performed using the navigation menu on the left side of the screen.

"Monitoring → OLT → Device information" page

This page provides basic information about the device: hostname, uptime, OLT software version, power supply information, temperature readings of built-in sensors, fan status, etc.

"Monitoring → OLT → IGMP Snooping Groups" page

The page provides information about IGMP groups requested on all OLT ports. The information is presented in two tables:

  • Total number of requested groups in each VLAN;
  • Individual requested groups.

It is possible to change the number of rows displayed in the table, as well as to filter the displayed information.

"Monitoring → OLT → System logs" page

This page contains a list of files with information about system operation (log files). You can view the last 500 lines of the log file in the web interface. To view the complete file, you must download it.

"Monitoring → OLT → MAC address table" page

The page displays all MAC addresses learned on the OLT. Under the table you can change the number of displayed rows — 10, 20, 50, 100. For convenient MAC search, you can use the filter group or sorting by selected column of the table.

"Monitoring → OLT → Port status"

This page contains three main blocks of information:

  • OLT graphical display;
  • PON ports table;
  • Front ports table.

OLT graphical display makes it possible to perform operations for each port (the menu should be opened with the right mouse button). For PON port, reconfiguration and disconnect operations are available. For the Front port, only disconnect operations are available. The PON port and Front port tables contain basic information about the port status, without the possibility of editing.

"Monitoring → ONT → PPPoE sessions" page

The page displays data about the current active PPPoE sessions. The information is available in read-only mode and only when PPPoE snooping is enabled.

"Monitoring → ONT → DHCP sessions" page

The page displays data about the current active DHCP sessions. The information is available in read-only mode and only when DCHP snooping is enabled.

"ONT list" page

This section displays information about all ONTs registered on the device and physically connected to ONT's PON channels. Above the table are buttons for creating a new ONT configuration, working with the configuration of existing ONTs, as well as icons for quick actions with ONTs (reboot, reconfiguration, factory reset). Configuration icons and quick action icons become active when one or more ONTs are selected. The following icons are available:

— creating a new ONT configuration;

— left to right: delete an ONT configuration, reboot ONT, reconfigure ONT, factory reset ONT.

A context menu with additional actions is available next to each ONT in the table — . The following actions are available by clicking this button:

  • Show ONT status;
  • Edit the ONT configuration;
  • Show MAC address table;
  • Show ONT counters;
  • Add ONT configuration (available for UNACTIVATED ONT only).

Page overview:

  • Нет меток