After the required controller appears in the list, it is necessary to configure it in the turnstile mode by setting the corresponding control type in the settings:
In the "Access control" section =>"Workers", click the "Add worker" button, specify the full name and add the pass on the "Access & Pass" tab.
Switch to "Access control" in the "Access patterns" section and click the "Add access" button, then select "Worker pattern".
Set the name and mark the relays to which access will be provided, then add the desired worker to the pattern using the "Add" button in the upper right corner.
Completed passes can be viewed in the "Journals" => "Passages" section.
