This command is used to view information about the command manager status.
show cmd-dispatcher
The command contains no arguments.
ROOT
ma4000# show cmd-dispatcher Command Dispatcher memory state: overload count 0 errors 0 size of element 1192 free 500 length 500 |
This command is used to view information about the event manager status.
show evt-dispatcher
The command contains no arguments.
ROOT
ma4000# show evt-dispatcher Command Dispatcher memory state: overload count 0 errors 0 size of element 992 free 500 length 500 |
This command allows to view statistics for a given (or all) queue system.
show queue <QUEUE>
<QUEUE> – queue number, may take values [0 .. 199].
ROOT
ma4000#show queue 0 Queue event top manager : tx count 13 rx count 13 overload count 0 read from empty count 0 pipe read errors 0 pipe write errors 0 size of element 4 free 500 length 500 |
This command is used to view the status of PP4X board SFP modules.
show sfp front-port <RANGE>
<RANGE> – interface number. The range of values and numbering rules are described in Table 4.1. If you specify the value 'all' in the command, all interfaces of the given type will be specified. You may specify the list of numbers using comma ( , ) or specify the range using hyphen ( - ).
ROOT
ma4000# show sfp front-port all SFP status: ~~~~~~~~~~~ Port Temp [C] Voltage [Volt] Current [mA] RX power [mWatt] TX power [mWatt] ----------------- --------- -------------- ------------ ---------------- ----------- front-port 1/0 N/A N/A N/A N/A N/A front-port 1/1 N/A N/A N/A N/A N/A front-port 1/2 N/A N/A N/A N/A N/A front-port 1/3 N/A N/A N/A N/A N/A front-port 1/4 N/A N/A N/A N/A N/A front-port 1/5 N/A N/A N/A N/A N/A ----------------- --------- -------------- ------------ ---------------- ----------- N/A – Not Available, N/S – Not Supported |