description
Set the profile description.
Syntax
description <VALUE>
no description
Parameters
<VALUE> - set of characters in the range from 1 to 127.
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-port-bridge)# description omci-bridge
igmp immediate-leave
Configuration of quick disconnect from MC group. The last member query is nor sending to the client.
Syntax
[no] igmp immediate-leave
Parameters
The command does not contain parameters.
Default value
Disabled.
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# igmp immediate-leave
igmp mode
Set the operation mode of IGMP on the device.
Syntax
igmp mode <VALUE>
Parameters
<VALUE> - [snooping | spr | proxy].
Default value
snooping
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# igmp mode proxy
igmp querier
Set the querier IP address to send IGMP query messages.
Syntax
igmp querirer <IP>
no igmp querirer
Parameters
<IP> - IP address, specified as AAA. BBB. CCC. DDD, where each part takes the value [0..255];
Default value
0.0.0.0
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# igmp querirer 192.168.0.1
igmp query interval
Set the periodicity of sending the query.
Syntax
igmp query interval <VALUE>
no igmp query interval
Parameters
<VALUE> - interval in the range [30-600].
Default value
125
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# igmp query interval 30
igmp query response
Set the waiting time of report message on query.
Syntax
igmp query response <VALUE>
no igmp query response
Parameters
<VALUE> - Interval in the range [50-2000].
Default value
100
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# igmp query response 30
igmp robustness
Set the number of IGMP message exchange intervals when monitoring MC groups.
Syntax
igmp robustness <VALUE>
no igmp robustness
Parameters
<VALUE> - value in the range [2-7].
Default value
2
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# igmp robustness 5
igmp version
Set the IGMP version.
Syntax
igmp version <VALUE>
no igmp version
Parameters
<VALUE> - value in the range [1-3].
Default value
3
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# igmp version 2
port <ID> multicast
Enable processing of multicast traffic on LAN port.
Syntax
port <ID> multicast
no port <ID> multicast
Parameters
<ID> - port index [1-4].
Default value
Disabled.
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# port 1 multicast
port <ID> bridge group
Set LAN port binding of ONT to OMCI-bridge.
Syntax
port <ID> bridge group <VALUE>
no port <ID> bridge group
Parameters
<ID> - port index [1-4];
<VALUE> - bridge group index [1-255].
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# port 1 bridge group 10
port <ID> igmp downstream priority
Set p-bit value for multicast traffic on the LAN interface.
Syntax
port <ID> igmp downstream priority <VALUE>
no port <ID> igmp downstream priority
Parameters
<ID> - port index [1-4];
<VALUE> - priority [0-7].
Default value
0
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# port 1 igmp downstream priority 7
port <ID> igmp downstream tag-control
Set VLAN manipulation rules to transmit downstream multicast traffic on the LAN interface
Syntax
port <ID> igmp downstream tag-control <VALUE>
no port <ID> igmp downstream tag-control
Parameters
<ID> - port index [1-4];
<VALUE> - [add-tag | pass | remove-tag | replace-tag | replace-vid].
Default value
pass
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# port 1 igmp downstream tag-control add-tag
port <ID> igmp downstream vid
Set VLAN ID value for multicast traffic on the LAN interface.
Syntax
port <ID> igmp downstream vid <VID>
no port <ID> igmp downstream vid
Parameters
<ID> - port index [1-4];
<VID> - VLAN ID, in the range [1-4094].
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# port 1 igmp downstream vid 200
port <ID> igmp upstream priority
Set p-bit value for multicast traffic on the LAN interface.
Syntax
port <ID> igmp upstream priority <VALUE>
no port <ID> igmp upstream priority
Parameters
<ID> - port index [1-4];
<VALUE> - priority [0-7].
Default value
0
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# port 1 igmp upstream priority 7
port <ID> igmp upstream tag-control
Set VLAN manipulation rules to transmit upstream multicast traffic on the LAN interface.
Syntax
port <ID> igmp upstream tag-control <VALUE>
no port <ID> igmp upstream tag-control
Parameters
<ID> - port index [1-4];
<VALUE> - [add-tag | pass | replace-tag | replace-vid].
Default value
pass
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# port 1 igmp upstream tag-control add-tag
port <ID> igmp upstream vid
Set VLAN ID value for multicast traffic on the LAN interface.
Syntax
port <ID> igmp upstream vid <VID>
no port <ID> igmp upstream vid
Parameters
<ID> - port index [1-4];
<VID> - VLAN ID, in the range [1-4094].
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# port 1 igmp upstream vid 200
name
Set profile name.
The profile name is a unique identifier to access a specific profile.
Syntax
name <VALUE>
Parameters
<VALUE> - set of characters in the range from 1 to 15.
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# name bridge-100
veip multicast enable
This command enables multicast traffic processing for Virtual Ethernet interace point.
Syntax
veip multicast enable
no veip multicast enable
Parameters
The command does not contain parameters.
Default value
Disabled.
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# veip multicast enable
veip igmp downstream priority
This command sets the p-bit value for multicast traffic for the Virtual Ethernet interace point.
Syntax
veip igmp downstream priority <VALUE>
no veip igmp downstream priority
Parameters
<VALUE> - priority [0-7].
Default value
0
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# veip igmp downstream priority 7
veip igmp downstream tag-control
This command sets the VLAN manipulation rules for downstream multicast traffic for Virtual Ethernet interace point.
Syntax
veip igmp downstream tag-control <VALUE>
no veip igmp downstream tag-control
Parameters
<VALUE> - [add-tag | pass | remove-tag | replace-tag | replace-vid].
Default value
pass
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# veip igmp downstream tag-control add-tag
veip igmp downstream vid
This command sets the VLAN ID value for multicast traffic for the Virtual Ethernet interace point.
Syntax
veip igmp downstream vid <VID>
no veip igmp downstream vid
Parameters
<VID> - VLAN ID, in the range [1-4094].
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# veip igmp downstream vid 10
veip igmp upstream priority
This command sets the p-bit value for multicast traffic for the Virtual Ethernet interace point.
Syntax
veip igmp upstream priority <VALUE>
no veip igmp upstream priority
Parameters
<VALUE> - priority [0-7].
Default value
0
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# veip igmp upstream priority 1
veip igmp upstream tag-control
This command sets the VLAN manipulation rules for upstream multicast traffic for Virtual Ethernet interace point.
Syntax
veip igmp upstream tag-control <VALUE>
no veip igmp upstream tag-control
Parameters
<VALUE> - [add-tag | pass | remove-tag | replace-tag | replace-vid].
Default value
pass
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# veip igmp upstream tag-control add-tag
veip igmp upstream vid
This command sets the VLAN ID value for multicast traffic for the Virtual Ethernet interace point.
Syntax
veip igmp upstream vid <VID>
no veip igmp upstream vid
Parameters
<VID> - VLAN ID, in the range [1-4094].
Privilege group
config-interface-ont-profile
Command mode
PROFILE-PORTS
Example
LTP-16N(config)(profile-ports-bridge)# veip igmp upstream vid 10