description
Set the profile description.
Syntax
description <VALUE>
no description
Parameters
<VALUE> - set of characters in the range from 1 to 127.
Privilege group
config-dhcp
Command mode
PROFILE-DHCP-OPT82
Example
LTP-16N(config)(profile-dhcp-opt82-DHCP82)# description DHCP-OPT82
circuit-id format
Set circuit-id format for the current profile.
Syntax
circuid-id format <VALUE>
no circuid-id format
Parameters
<VALUE> - Format parameter. String, 240 characters max. May take values:
- %HOSTNAME% - LTP host name;
- %MNGIP% - management interface IP address;
- %GPON-PORT% - gpon port ID;
- %ONTID% - ONT administrator ID;
- %PONSERIAL% - ONT serial number;
- %GEMID% - GEM port ID;
- %VLAN0% - Outer VLAN ID;
- %VLAN1% - Inner VLAN ID;
- %MAC% - user device MAC address;
- %OLTMAC% - OLT MAC address;
- %OPT60% - Option60 of incoming packets;
- %OPT82_CID% - Option82 Circuit ID of incoming packets;
- %OPT82_RID% - Option82 Remote ID of incoming packets;
- %DESCR% - ONT configuration description.
Any characters except '%' can be between parameter values.
Privilege group
config-dhcp
Command mode
PROFILE-DHCP-OPT82
Example
LTP-16N(profile-dhcp-opt82-DHCP82)# circuit-id format 'host=%HOSTNAME%,ont=%ONTID%'
circuit-id mode
Set circuit-id mode for the current profile.
Syntax
circuit-id mode <VALUE>
no circuit-id mode
Parameters
<VALUE> - Mode selection parameter. May take values:
- binary;
- text.
Default value
text.
Privilege group
config-dhcp
Command mode
PROFILE-DHCP-OPT82
Example
LTP-16N(config)(profile-dhcp-opt82-DHCP82)# circuit-id mode binary
name
Set profile name.
The profile name is a unique identifier to access a specific profile.
Syntax
name <VALUE>
Parameters
<VALUE> - string, from 1 to 15 characters long.
Privilege group
config-dhcp
Command mode
PROFILE-DHCP-OPT82
Example
LTP-16N(config)(profile-dhcp-opt82-dhcp)# name DHCP82-10
ont-sn-format
Set the ONT serial number format for the current profile.
Syntax
ont-sn-format <VALUE>
no ont-sn-format
Parameters
<VALUE> - ONT serial number format. May take values:
- literal;
- numerical;
- section-numerical.
Default value
literal.
Privilege group
config-dhcp
Command mode
PROFILE-DHCP-OPT82
Example
LTP-16N(config)(profile-dhcp-opt82-dhcp)# ont-sn-format numerical
overwrite-opt82 enable
Set overwriting option 82 for this profile.
Syntax
[no] overwrite-opt82 enable
Parameters
The command does not contain parameters.
Default value
Disabled.
Privilege group
config-dhcp
Command mode
PROFILE-DHCP-OPT82
Example
LTP-16N(config)(profile-dhcp-opt82-dhcp)# overwrite-opt82 enable
remote-id format
Set remote-id format for the current profile.
Syntax
remote-id format <VALUE>
no remote-id format
Parameters
<VALUE> - Format parameter. String, 240 characters max. May take values:
- %HOSTNAME% - LTP host name;
- %MNGIP% - management interface IP address;
- %GPON-PORT% - gpon port ID;
- %ONTID% - ONT administrator ID;
- %PONSERIAL% - ONT serial number;
- %GEMID% - GEM port ID;
- %VLAN0% - Outer VLAN ID;
- %VLAN1% - Inner VLAN ID;
- %MAC% - user device MAC address;
- %OLTMAC% - OLT MAC address;
- %OPT60% - Option60 of incoming packets;
- %OPT82_CID% - Option82 Circuit ID of incoming packets;
- %OPT82_RID% - Option82 Remote ID of incoming packets;
- %DESCR% - ONT configuration description.
Any characters except '%' can be between parameter values.
Privilege group
config-dhcp
Command mode
PROFILE-DHCP-OPT82
Example
LTP-16N(profile-dhcp-opt82-DHCP82)# remote-id format 'host=%HOSTNAME%,ont=%ONTID%'
remote-id mode
Set remote-id mode for the current profile.
Syntax
remote-id mode <VALUE>
no remote-id mode
Parameters
<VALUE> - Mode selection parameter. May take values:
- binary;
- text.
Default value
text.
Privilege group
config-dhcp
Command mode
PROFILE-DHCP-OPT82
Example
LTP-16N(config)(profile-dhcp-opt82-DHCP82)# remote-id mode binary