Eltex Documentation EN
Быстрые ссылки
Дерево страниц
Перейти к концу метаданных
Переход к началу метаданных

Вы просматриваете старую версию данной страницы. Смотрите текущую версию.

Сравнить с текущим просмотр истории страницы

« Предыдущий Версия 2 Текущий »

vlan

Switch to the VLAN configuration mode.

Syntax
[no] vlan <VID>
Parameters

<VID> — VLAN ID in the range of [1-4094]. The parameter can be set by a range or enumeration (for example: vlan 1-100 or vlan 100,200,300).

Privilege group
config-vlan
Command mode

CONFIG

Example
LTP-16N(configure)# vlan 100

name

Sets name for VLAN.

Syntax
name <VALUE>
no name
Parameters

<VALUE> — character set in the range of [1-15].

Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# name HSI

ip igmp last-member-query-interval

Sets the request interval of the last participant for the given VLAN.

Syntax
ip igmp last-member-query-interval <VALUE>
no ip igmp last-member-query-interval
Parameters

<VALUE> — interval in the range [1-25] in seconds.

Default value

10

Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# ip igmp last-member-query-interval 13

ip igmp query-interval

Sets General Query sending interval for this VLAN.

Syntax
ip igmp query-interval <VALUE>
no ip igmp query-interval
Parameters

<VALUE> — interval in the range [30-600] in seconds.

Default value
125
Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# ip igmp query-interval 300

ip igmp querier user prio

Sets 802.1p priority for query packets for this VLAN.

Syntax
ip igmp snooping querier user-prio <VALUE>
no ip igmp snooping querier user-prio
Parameters

<VALUE> — 802.1p priority from 1 to 7.

Default value
0
Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# ip igmp snooping querier user-prio 3

ip igmp query-response-interval

Sets Query response wait time for this VLAN.

Syntax
ip igmp query-response-interval <VALUE>
no ip igmp query-response-interval
Parameters

<VALUE> — interval in the range of [50-2000] in seconds.

Default value
100
Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# ip igmp query-response-interval 1000

ip igmp robustness-variable

Sets reliability variable for this VLAN.

Syntax
ip igmp robustness-variable <VALUE>
no ip igmp robustness-variable
Parameters

<VALUE> — value in the range of [2-7].

Default value
2
Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# ip igmp robustness-variable 5

ip igmp snooping enable

Enables IGMP snooping for this VLAN.

Syntax
[no] ip igmp snooping enable
Parameters

The command does not contain any parameters.

Default value
Disabled
Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# ip igmp snooping enable

ip igmp snooping mrouter

Sets the port that is connected to a multicast router for the given VLAN.

Syntax
[no] ip igmp snooping mrouter <PORT-TYPE> <PORT-ID>
Parameters
  • <PORT-TYPE> — port type:
    • pon-port;
    • front-port.
  • <PORT-ID> — port index. For pon-port — [1-16], front-port — [1-8].
Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# ip igmp snooping mrouter gpon-port 10

ip igmp snooping querier dscp

Sets DSCP value for the generated Query for this VLAN.

Syntax
ip igmp snooping querier dscp <VALUE>
no ip igmp snooping querier dscp
Parameters

<VALUE> — value in the range of [0-63].

Default value
0
Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# ip igmp snooping querier dscp 10

ip igmp snooping querier enable

Enables Query processing for this VLAN.

Syntax
[no] ip igmp snooping querier enable
Parameters

The command does not contain any parameters.

Default value
Disabled
Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# ip igmp snooping querier enable

ip igmp snooping fast-leave

Enables immediate group disconnection for this VLAN.

Syntax
[no] ip igmp snooping querier fast-leave
Parameters

The command does not contain any parameters.

Default value
Disabled
Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# ip igmp snooping querier fast-leave

ip igmp snooping querier ip-address

Sets the value of the querier ip address for this VLAN.

Syntax
ip igmp snooping querier ip-address <IP>
no ip igmp snooping querier ip-address
Parameters

<IP> — IP address specified as AAA. BBB. CCC. DDD, where each part takes the value [0..255].

Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# ip igmp snooping querier ip-address 192.168.100.1

ip igmp snooping replace source-ip

Enables source-ip address spoofing in IGMP packets for this VLAN.

Syntax
ip igmp snooping replace source-ip <IP>
no ip igmp snooping replace source-ip
Parameters

<IP> — IP address, specified as AAA. BBB. CCC. DDD, where each part takes the value [0..255].

Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# ip igmp snooping replace source-ip 192.168.100.2

ip igmp snooping static

Adds a static IGMP group for this VLAN to the specified port.

Syntax
[no] ip igmp snooping static <IP> interface <PORT-TYPE> <PORT-ID>
Parameters
  • <IP> — IP address specified as AAA. BBB. CCC. DDD, where each part takes the value [0..255];
  • <PORT-TYPE> — port type:
    • pon-port;
    • front-port.
  • <PORT-ID> — port index. For pon-port — [1-16], front-port — [1-8].
Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# ip igmp snooping static 224.224.100.1 interface front-port 3

ip igmp version

Sets the IGMP version compatibility for this VLAN.

Syntax
[no] ip igmp version <VALUE>
Parameters

<VALUE> — IGMP versions:

  • v1-only
  • v2-only
  • v3-only
  • v1-v2
  • v1-v3
  • v2-v3
  • v1-v2-v3
Default value
v1-v2-v3
Privilege group
config-vlan
Command mode

VLAN

Example
LTP-16N(config)(vlan-100)# ip igmp version v3-only

  • Нет меток