Abstract
This guidance describes CLI commands for LTP-16N optical line terminal (hereinafter referred to as device) administrator.
Command Line Interface (CLI) allows to perform the device management and monitor its operation and status. You will require the PC application supporting Telnet or SSH protocol operation or direct connection via the console port (e.g. Minicom).
Target Audience
CLI command reference guide is dedicated to the technical staff that performs the LTP-16N terminal configuration and monitoring using the CLI interface. Qualified technical personnel should be familiar with the operation basics of TCP/IP protocol stacks and Ethernet/GPON networks design concepts.
Notes and warnings
Warnings are used to inform the user about harmful situations for the device and the user alike, which could cause malfunction or data loss.
Abbreviations used
ARP – Address Resolution Protocol
DBA – Dynamic bandwidth allocation
DHCP – Dynamic Host Configuration Protocol
FTP – File Transfer Protocol
FW – Firmware
GPON – Gigabit Passive Optical Network
HTTP – HyperText Transfer Protocol
ICMP – Internet Control Message Protocol
IP – Internet Protocol
MAC – Media Access Control
OLT – Optical Line Terminal
ONT – Optical Network Terminal
ONU – Optical Network Unit
SFP – Small Form-factor Pluggable
SSH – Secure Shell
TFTP – Trivial File Transfer Protocol
URL – Uniform Resource Locator
VLAN – Virtual Local Area Network