alarm
Switch to alarm configuration mode.
Syntax
alarm
Parameters
The command does not contain any parameters.
Privilege group
config-general
Command mode
CONFIG
Example
LTP-16N(configure)# alarm
config-change severity
Setting the category of normalizing alarm when applying the configuration.
Syntax
config-change severity <SEVERITY>
no config-change
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
info
Privilege group
config-alarm
Command mode
ALARM
Example
LTP-16N(config)(alarm)# config-change severity critical
config-change in
Configuration of sending normalizing alarm snmp-trap when configuration is applied.
Syntax
config-change in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# config-change in true
config-save severity
Setting the category of normalizing alarm when saving the configuration.
Syntax
config-save severity <SEVERITY>
no config-save
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
info
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# config-save severity critical
config-save in
Configuration of sending normalizing alarm snmp-trap when configuration is saved.
Syntax
config-save in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# config-save in true
system-fan severity
Fan alarm category configuration.
Syntax
system-fan severity <SEVERITY>
no system-fan
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-alarm
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-fan severity major
system-fan in
Configuration of sending alarm snmp-trap by fans.
Syntax
system-fan in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-fan in true
system-fan out
Configuration of sending normalizing alarm snmp-trap by fans.
Syntax
system-fan out <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-fan out true
system-fan max-rpm
Configuration of the upper value of the fan speed at which an alarm will occur.
Syntax
system-fan max-rpm <VALUE>
no system-fan
Parameters
<VALUE> — value in the range [600-20000].
Default value
12000
Privilege group
config-alarm
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-fan max-rpm 1000
system-fan min-rpm
Configuration of the lower value of the fan speed at which an alarm will occur.
Syntax
system-fan min-rpm <VALUE>
no system-fan
Parameters
<VALUE> — value in the range [600-8000].
Default value
2000
Privilege group
config-alarm
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-fan min-rpm 1000
system-load-average severity
Configuration of alarm category by average CPU load.
Syntax
system-load-average severity <SEVERITY>
no load-average
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-alarm
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-load-average severity major
system-load-average in
Configuration of sending alarm snmp-trap by average CPU load.
Syntax
system-load-average in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-load-average in true
system-load-average out
Configuration of sending normalizing alarm snmp-trap by average CPU load.
Syntax
system-load-average out <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-load-average out true
system-load-average level
Configuration of the threshold for the average CPU load at which an accident will trigger.
Syntax
system-load-average level <VALUE>
no system-load-average
Parameters
<VALUE> — value in the range [0-250].
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-load-average level 100
system-login severity
Configuration of the normalizing alarm category by user authentication.
Syntax
system-login severity <SEVERITY>
no system-login
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
info
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-login severity major
system-login in
Configuration of sending normalizing alarm snmp-trap by user authorization.
Syntax
system-login in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-login in true
system-logout severity
Configuration of the normalizing alarm category by user disconnection.
Syntax
system-logout severity <SEVERITY>
no system-logout
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
info
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-logout severity major
system-logout in
Configuration of sending normalizing alarm snmp-trap by user logout.
Syntax
system-logout in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-logout in true
system-ram severity
Memory alarm category configuration.
Syntax
system-ram severity <SEVERITY>
no system-ram
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-ram severity major
system-ram in
Configuration of sending alarm snmp-trap by memory.
Syntax
system-ram in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-ram in true
system-ram out
Configuration of sending normalizing alarm snmp-trap by memory.
Syntax
system-ram out <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-ram out true
system-ram free
Set the alarm threshold value from memory.
Syntax
system-ram free <VALUE>
no system-ram
Parameters
<VALUE> — value in the range [0-100].
Default value
12
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-ram free 20
system-temperature severity
Temperature sensors alarm category configuration.
Syntax
system-temperature severity <SEVERITY>
no system-temperature
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-temperature severity major
system-temperature in
Configuration of sending alarm snmp-trap by temperature sensors.
Syntax
system-temperature in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-temperature in true
system-temperature out
Configuration of sending normalizing alarm snmp-trap by temperature sensors.
Syntax
system-temperature out <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-temperature out true
system-temperature sensor 〈TYPE〉 max
Set the maximum temperature at which an accident will trigger at the specified sensor.
Syntax
system-temperature sensor <TYPE> max <VALUE>
no system-temperature
Parameters
<TYPE> — sensors:
- gpon-ports-1
- gpon-ports-2
- front-ports
- switch
<VALUE> — values from 0 to 100 in Celsius degrees.
Default value
70
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-temperature sensor switch max 80
system-temperature sensor 〈TYPE〉 min
Set the maximum temperature at which an accident will trigger at the specified sensor.
Syntax
system-temperature sensor <TYPE> min <VALUE>
no system-temperature
Parameters
<TYPE> — sensors:
- pon-ports-1
- pon-ports-2
- front-ports
- switch
<VALUE> — values from 0 to 100 in Celsius degrees.
Default value
0
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# system-temperature sensor switch min 5
pon-alarm-dfi severity
Configuration of Deactivate Failure pon alarm category for ONUi.
Syntax
pon-alarm-dfi severity <SEVERITY>
no pon-alarm-dfi
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-dfi severity major
pon-alarm-dfi in
Configuration of sending Deactivate Failure pon alarm snmp-trap for ONUi.
Syntax
pon-alarm-dfi in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-dfi in true
pon-alarm-dgi severity
Configuration of Dying-Gasp pon alarm category for ONUi.
Syntax
pon-alarm-dgi severity <SEVERITY>
no pon-alarm-dfi
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-dgi severity major
pon-alarm-dgi in
Configuration of sending Dying-Gasp pon alarm snmp-trap for ONUi.
Syntax
pon-alarm-dgi in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-dgi in true
pon-alarm-dowi severity
Configuration of Drift of Window pon alarm category for ONUi.
Syntax
pon-alarm-dowi severity <SEVERITY>
no pon-alarm-dowi
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-dowi severity major
pon-alarm-dowi in
Configuration of sending Drift of Window pon alarm snmp-trap for ONUi.
Syntax
pon-alarm-dowi in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-dowi in true
pon-alarm-lcdgi severity
Configuration of Loss of Channel Delineation pon alarm category for ONUi.
Syntax
pon-alarm-lcdgi severity <SEVERITY>
no pon-alarm-lcdgi
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-lcdgi severity major
pon-alarm-lcdgi in
Configuration of sending Loss of GEM Channel Delineation pon alarm snmp-trap for ONUi.
Syntax
pon-alarm-lcdgi in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-lcdgi in true
pon-alarm-loai severity
Configuration of Loss of Acknowledge pon alarm category for ONUi.
Syntax
pon-alarm-loai severity <SEVERITY>
no pon-alarm-loai
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-loai severity major
pon-alarm-loai in
Configuration of sending Loss of Acknowledge pon alarm snmp-trap for ONUi.
Syntax
pon-alarm-loai in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-loai in true
pon-alarm-loami severity
Configuration of PLOAM loss pon alarm category for ONUi.
Syntax
pon-alarm-loami severity <SEVERITY>
no pon-alarm-loami
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-loami severity major
pon-alarm-loami in
Configuration of sending PLOAM loss pon alarm snmp-trap for ONUi.
Syntax
pon-alarm-loami in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-loami in true
pon-alarm-lofi severity
Configuration of Loss of Frame pon alarm category for ONUi.
Syntax
pon-alarm-lofi severity <SEVERITY>
no pon-alarm-lofi
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-lofi severity major
pon-alarm-lofi in
Configuration of sending Loss of Frame pon alarm snmp-trap for ONUi.
Syntax
pon-alarm-lofi in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-lofi in true
pon-alarm-loki severity
Configuration of Loss of Key pon alarm category for ONUi.
Syntax
pon-alarm-loki severity <SEVERITY>
no pon-alarm-loki
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-loki severity major
pon-alarm-loki in
Configuration of sending Loss of Key pon alarm snmp-trap for ONUi.
Syntax
pon-alarm-loki in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-loki in true
pon-alarm-los severity
Configuration of Loss of Signal pon alarm category.
Syntax
pon-alarm-los severity <SEVERITY>
no pon-alarm-los
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-los severity major
pon-alarm-los in
Configuration of sending Loss of Signal pon alarm snmp-trap.
Syntax
pon-alarm-los in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-los in true
pon-alarm-los out
Configuration of sending Loss of Signal normalizing pon alarm snmp-trap.
Syntax
pon-alarm-los out <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-los out true
pon-alarm-losi severity
Configuration of Loss of Signal pon alarm category for ONUi.
Syntax
pon-alarm-losi severity <SEVERITY>
no pon-alarm-losi
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-losi severity major
pon-alarm-losi in
Configuration of sending Loss of Signal pon alarm snmp-trap for ONUi.
Syntax
pon-alarm-losi in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-losi in true
pon-alarm-rdii severity
Configuration of Remote Defect Indication pon alarm category for ONUi.
Syntax
pon-alarm-rdii severity <SEVERITY>
no pon-alarm-rdii
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-rdii severity major
pon-alarm-rdii in
Configuration of sending Remote Defect Indication pon alarm snmp-trap for ONUi.
Syntax
pon-alarm-rdii in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-rdii in true
pon-alarm-sdi severity
Configuration of Signal Degraded pon alarm category for ONUi.
Syntax
pon-alarm-sdi severity <SEVERITY>
no pon-alarm-sdi
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-sdi severity major
pon-alarm-sdi in
Configuration of sending Signal Degraded pon alarm snmp-trap for ONUi.
Syntax
pon-alarm-sdi in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-sdi in true
pon-alarm-sufi severity
Configuration of Start-up Failure pon alarm category for ONUi.
Syntax
pon-alarm-sufi severity <SEVERITY>
no pon-alarm-sufi
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-sufi severity major
pon-alarm-sufi in
Configuration of sending Start-up Failure pon alarm snmp-trap for ONUi.
Syntax
pon-alarm-sufi in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-sufi in true
pon-alarm-tiwi severity
Configuration of Transmission Interference Warning pon alarm category for ONUi.
Syntax
pon-alarm-tiwi severity <SEVERITY>
no pon-alarm-tiwi
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
critical
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-tiwi severity major
pon-alarm-tiwi in
Configuration of sending Transmission Interference Warning pon alarm snmp-trap for ONUi.
Syntax
pon-alarm-sufi in <SEND>
Parameters
<SEND> — send snmp trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# pon-alarm-tiwi in true
ont-link-down in
Configuration of sending SNMP trap on ont-link-down PON alarm. An alarm indicates that link is down on ONT.
Syntax
ont-link-down in <SEND>
no ont-link-down
Parameters
<SEND> — send SNMP trap or not:
- true
- false
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-link-down in true
ont-link-down severity
Configuration of sending SNMP trap on ont-link-down PON alarm. An alarm indicates that link is down on ONT.
Syntax
ont-link-down severity <SEVERITY>
no ont-link-down severity
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
info
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-link-down in true
ont-link-down ttl
Configuration of ont-link-down alarm lifetime. An alarm indicates that link is down on ONT.
Syntax
ont-link-down ttl <VALUE>
no ont-link-down ttl
Parameters
<VALUE> — parameter is responsible for alarm normalization and storing. From -1 to 2147483647 seconds.
"-1" — send trap and do not save alarm to active;
"0" — store alarm until normalizing event.
Default value
-1
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-link-down in true
ont-link-up in
Configuration of sending SNMP trap on ont-link-up PON alarm. An alarm indicates that link is up on ONT.
Syntax
ont-link-up in <SEND>
no ont-link-up
Parameters
<SEND> — send SNMP trap or not:
- true;
- false.
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-link-up in true
ont-link-up severity
Configuration of sending SNMP trap on ont-link-up PON alarm. An alarm indicates that link is up on ONT.
Syntax
ont-link-up severity <SEVERITY>
no ont-link-up severity
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
info
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-link-up in true
ont-link-up ttl
Configuration of ont-link-up alarm time. An alarm indicates that link is up on ONT.
Syntax
ont-link-up ttl <VALUE>
no ont-link-up ttl
Parameters
<VALUE> — parameter is responsible for alarm normalization and storing. From -1 to 2147483647 seconds.
"-1" — send trap and do not save alarm to active;
"0" — store alarm until normalizing event.
Default value
-1
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-link-up in true
ont-no-config in
Configuration of sending SNMP trap on ont-no-config PON alarm. An alarm indicates that link is up on ONT.
Syntax
ont-no-config in <SEND>
no ont-no-config
Parameters
<SEND> — send SNMP trap or not:
- true;
- false.
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-link-down in true
ont-no-config severity
Configuration of sending SNMP trap on ont-no-config PON alarm. An alarm indicates that there is no configuration on ONT.
Syntax
ont-no-config severity <SEVERITY>
no ont-no-config severity
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
info
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-no-config in true
ont-no-config ttl
Configuration of ont-no-config alarm lifetime. An alarm indicates that there is no configuration on ONT.
Syntax
ont-no-config ttl <VALUE>
no ont-no-config ttl
Parameters
<VALUE> — parameter is responsible for alarm normalization and storing. From -1 to 2147483647 seconds.
"-1" — send trap and do not save alarm to active;
"0" — store alarm until normalizing event.
Default value
-1
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-no-config in true
ont-state-changed in
Configuration of sending SNMP trap on ont-state-changed PON alarm. An alarm indicates a state change on ONT.
Syntax
ont-state-changed in <SEND>
no ont-state-changed
Parameters
<SEND> — send SNMP trap or not:
- true;
- false.
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-state-changed in true
ont-state-changed severity
Configuration of sending SNMP trap on ont-state-changed PON alarm. An alarm indicates a state change on ONT.
Syntax
ont-state-changed severity <SEVERITY>
no ont-state-changed severity
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
info
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-link-down in true
ont-state-changed ttl
Configuration of ont-state-changed alarm lifetime. An alarm indicates a state change on ONT.
Syntax
ont-no-config ttl <VALUE>
no ont-no-config ttl
Parameters
<VALUE> — parameter is responsible for alarm normalization and storing. From -1 to 2147483647 seconds.
"-1" — send trap and do not save alarm to active;
"0" — store alarm until a normalizing event.
Default value
-1
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-state-changed in true
ont-valid-config in
Configuration of sending SNMP trap on ont-valid-config PON alarm. An alarm indicates that there is a configuration for ONT.
Syntax
ont-valid-config in <SEND>
no ont-valid-config
Parameters
<SEND> — send SNMP trap or not:
- true;
- false.
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-valid-config in true
ont-valid-config severity
Configuration of sending SNMP trap on ont-valid-config PON alarm. An alarm indicates that there is a configuration for ONT.
Syntax
ont-valid-config severity <SEVERITY>
no ont-valid-config severity
Parameters
<SEVERITY> — alarm severity rating:
- info
- minor
- major
- critical
Default value
info
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-state-changed in true
ont-valid-config ttl
Configuration of ont-valid-config alarm lifetime. An alarm indicates that there is a configuration for ONT.
Syntax
ont-valid-config ttl <VALUE>
no ont-valid-config ttl
Parameters
<VALUE> — parameter is responsible for alarm normalization and storing. From -1 to 2147483647 seconds
"-1" — send trap and do not save alarm to active;
"0" — store alarm until a normalizing event.
Default value
-1
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-valid-config in true
mac-duplicate in
Configuration of sending SNMP trap on mac-duplicate PON alarm. An alarm indicates that there is MAC addresses duplication, meaning that one MAC address was learnt on two OLT ports.
Syntax
mac-duplicate in <SEND>
no mac-duplicate
Parameters
<SEND> — send SNMP trap or not:
- true;
- false.
Default value
true
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# ont-mac-duplicate in true
mac-duplicate severity
Configuration of sending SNMP trap on mac-duplicate PON alarm. An alarm indicates that there is MAC addresses duplication, meaning that one MAC address was learnt on two OLT ports.
Syntax
mac-duplicate severity <SEVERITY>
no mac-duplicate severity
Parameters
<SEVERITY> — категория важности аварии:
- info
- minor
- major
- critical
Default value
info
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# mac-duplicate in true
mac-duplicate ttl
Configuration of mac-duplicate alarm lifetime. An alarm indicates that there is MAC addresses duplication, meaning that one MAC address was learnt on two OLT ports.
Syntax
mac-duplicate ttl <VALUE>
no mac-duplicate ttl
Parameters
<VALUE> — parameter is responsible for alarm normalization and storing. From -1 to 2147483647 seconds.
"-1" — send trap and do not save alarm to active;
"0" — store alarm until a normalizing event.
Default value
-1
Privilege group
config-general
Command mode
ALARM
Example
LTP-16N(config)(alarm)# mac-duplicate in true