template
Switch to the template configuration mode.
Syntax
[no] template <NAME>
Parameters
<NAME> — profile name. Set of characters in the range from 1 to 15.
Privilege group
CONFIG_ACCESS
Command mode
CONFIG
Example
LTP-16N(configure)# template one_service
broadcast-filter
Enables tagged broadcast traffic filtration on broadcast GEM.
Syntax
[no] broadcast-filter
Parameters
The command does not contain any parameters.
Default value
Enabled
Privilege group
CONFIG_ACCESS
Command mode
TEMPLATE
Example
LTP-16N(config)(template-one_service)# broadcast-filter
description
Sets interface description.
Syntax
description <VALUE>
no description
Parameters
<VALUE> — set of characters in the range from 1 to 27.
Privilege group
CONFIG_ACCESS
Command mode
PROFILE-ONT
Example
LTP-16N(config)(template-one_service)# description "VPN"
multicast-filter
Enables tagged multicast traffic filtration on GEM.
Syntax
[no] multicast-filter
Parameters
The command does not contain any parameters.
Default value
Enabled
Privilege group
CONFIG_ACCESS
Command mode
TEMPLATE
Example
LTP-16N(config)(template-one_service)# multicast-filter
profile ports
Sets ports profile.
Syntax
profile ports <VALUE>
no profile ports
Parameters
<VALUE> — profile name.
Default value
profile ports ports1
Privilege group
CONFIG_ACCESS
Command mode
TEMPLATE
Example
LTP-16N(config)(template-one_service)# profile ports "bridge"
profile management
Sets management profile.
Syntax
profile management <VALUE>
no profile management
Parameters
<VALUE> — profile name.
Privilege group
CONFIG_ACCESS
Command mode
TEMPLATE
Example
LTP-16N(config)(template-one_service)# profile management ACS
profile shaping
Sets bandwidth shaping profile.
Syntax
profile shaping <VALUE>
no profile shaping
Parameters
<VALUE> — profile name.
Privilege group
CONFIG_ACCESS
Command mode
TEMPLATE
Example
LTP-16N(config)(template-one_service)# profile shaping "10MB"
service〈ID〉profile cross-connect
Sets cross-connect profile for a service.
Syntax
service <ID> profile cross-connect <VALUE>
no service <ID> profile cross-connect
Parameters
<ID> — service index [1-32];
<VALUE> — profile name.
Privilege group
CONFIG_ACCESS
Command mode
TEMPLATE
Example
LTP-16N(config)(template-one_service)# profile shaping "10MB"
service〈ID〉profile dba
Sets DBA profile for a service.
Syntax
service <ID> profile dba <VALUE>
no service <ID> profile dba
Parameters
<ID> — service index [1-32];
<VALUE> — profile name.
Privilege group
CONFIG_ACCESS
Command mode
TEMPLATE
Example
LTP-16N(config)(template-one_service)# service 1 profile dba DBA-HSI
rf-port-state
ONT RF port management.
Syntax
rf-port-state <VALUE>
no rf-port-state
Parameters
<VALUE> — RF port state. Possible values: disabled, enabled, no-change.
Privilege group
CONFIG_ACCESS
Command mode
TEMPLATE
Example
LTP-16N(config)(template-one_service)# profile management ACS
define〈VALUE〉
Configures service redefining from template. When define is configured, a parameter specified in template will be used.
Syntax
rf-port-state <VALUE>
no rf-port-state
Parameters
<VALUE> — parameter that will be redefined. Broadcast-filter, description, multicast-filter, profile, rf-port-state, service.
Default value
undefine
Privilege group
CONFIG_ACCESS
Command mode
TEMPLATE
Example
LTP-16N(config)(template-one_service)# define service 1
name
Sets profile name.
Profile name is a unique identifier to access a specific profile.
Syntax
name <VALUE>
Parameters
<VALUE> — set of characters in the range from 1 to 15.
Privilege group
CONFIG_ACCESS
Command mode
TEMPLATE
Example
LTP-16N(config)(profile-cross-connect-cc)# name HSI-100