broadcast-filter
Enable filtering of tagged broadcast traffic on broadcast GEM.
Syntax
[no] broadcast-filter
Parameters
The command does not contain parameters.
Default value
Enabled.
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# broadcast-filter
multicast-filter
Enable filtering of tagged multicast traffic on multicast GEM.
Syntax
[no] multicast-filter
Parameters
The command does not contain parameters.
Default value
Enabled.
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# multicast-filter
password
Set the PON password for ONT.
Syntax
password <VALUE>
no password
Parameters
<VALUE> - string, 10 characters max.
Default value
0000000000
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# password 1111111111
profile ports
Set ports profile.
Syntax
profile ports <VALUE>
no profile ports
Parameters
<VALUE> - profile name.
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# profile ports HSI-BRIDGE
serial
Set ports profile.
Syntax
serial <VALUE>
no serial
Parameters
<VALUE> - ONT serial number, in format: AAAAXXXXXXXX or XXXXXXXXXXXXXXXX , where A – latin uppercase letters, X – hexadecimal digits [0-F].
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# serial ELTX6203370C
service <ID> profile cross-connect
Set the cross-connect profile for service.
Syntax
service <ID> profile cross-connect <VALUE>
no service <ID> profile cross-connect
Parameters
<ID> - service index [1-32];
<VALUE> - profile name.
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# service 1 profile cross-connect HSI
service <ID> profile dba
Set the DBA profile for service.
Syntax
service <ID> profile dba <VALUE>
no service <ID> profile dba
Parameters
<ID> - service index [1-32];
<VALUE> - profile name.
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# service 1 profile dba DBA-HSI
iphost management static <SETTINGS>
Set static iphost network settings for the management ont profile.
Syntax
iphost management static <SETTINGS>
no iphost management static <SETTINGS>
Parameters
<SETTINGS> - network settings that should be configured:
- ip - management ont profile IP address. Specified in format of AAA.BBB.CCC.DDD;
- mask - management ont profile netmask. Specified in format of AAA.BBB.CCC.DDD;
- gateway - management ont profile gateway address. Specified in format of AAA.BBB.CCC.DDD.
Default values
- ip - 0.0.0.0;
- mask - 0.0.0.0;
- gateway - 0.0.0.0.
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# iphost management static ip 192.168.1.5 gateway 192.168.1.1