circuit-id format
Set circuit-id format for the current profile.
Syntax
circuid-id format <VALUE>
no circuid-id format
Parameters
<VALUE> - Format parameter. String, 240 characters max. May take values:
- %HOSTNAME% - LTP host name;
- %MNGIP% - management interface IP address;
- %GPON-PORT% - gpon port ID;
- %ONTID% - ONT administrator ID;
- %PONSERIAL% - ONT serial number;
- %GEMID% - GEM port ID;
- %VLAN0% - Outer VLAN ID;
- %VLAN1% - Inner VLAN ID;
- %MAC% - user device MAC address;
- %OLTMAC% - OLT MAC address;
- %DESCR% - ONT configuration description.
Any characters except '%' can be between parameter values.
Privilege group
config-pppoe
Command mode
PROFILE-PPPOE-IA
Example
LTP-16N(profile-pppoe-ia-PPPOE)# circuit-id format 'host=%HOSTNAME%,ont=%ONTID%'
description
Set the profile description.
Syntax
description <VALUE>
no description
Parameters
<VALUE> - set of characters in the range from 1 to 127.
Privilege group
config-pppoe
Command mode
PROFILE-PPPOE-IA
Example
LTP-16N(config)(profile-pppoe-ia-PPPOE)# description PPPOE-IA for LTP-16N.
name
Set profile name.
The profile name is a unique identifier to access a specific profile.
Syntax
name <VALUE>
Parameters
<VALUE> - string, from 1 to 15 characters long.
Privilege group
config-pppoe
Command mode
PROFILE-PPPOE-IA
Example
LTP-16N(config)(profile-pppoe-ia-PPPOE)# name PPPOE-IA
ont-sn-format
Set the ONT serial number format for the current profile.
Syntax
ont-sn-format <VALUE>
no ont-sn-format
Parameters
<VALUE> - ONT serial number format. May take values:
- literal;
- numerical;
- section-numerical.
Default value
literal.
Privilege group
config-pppoe
Command mode
PROFILE-PPPOE-IA
Example
LTP-16N(config)(profile-pppoe-ia-PPPOE)# ont-sn-format numerical
remote-id format
Set remote-id format for the current profile.
Syntax
remote-id format <VALUE>
no remote-id format
Parameters
<VALUE> - Format parameter. String, 240 characters max. May take values:
- %HOSTNAME% - LTP host name;
- %MNGIP% - management interface IP address;
- %GPON-PORT% - gpon port ID;
- %ONTID% - ONT administrator ID;
- %PONSERIAL% - ONT serial number;
- %GEMID% - GEM port ID;
- %VLAN0% - Outer VLAN ID;
- %VLAN1% - Inner VLAN ID;
- %MAC% - user device MAC address;
- %OLTMAC% - OLT MAC address;
- %DESCR% - ONT configuration description.
Any characters except '%' can be between parameter values.
Privilege group
config-pppoe
Command mode
PROFILE-PPPOE-IA
Example
LTP-16N(config)(profile-pppoe-ia-PPPOE)# remote-id format 'host=%HOSTNAME%,ont=%ONTID%'
vendor-id
This command sets the vendor ID for the current profile.
Syntax
vendor-id <VALUE>
no vendor-id
Parameters
<VALUE> - vendor ID. A 3-byte number from 0x000000 to 0xffffff.
Privilege group
config-pppoe
Command mode
PROFILE-PPPOE-IA
Example
LTP-16N(config)(profile-pppoe-ia-PPPOE)# vendor-id 0x000fff