firmware select
Select the partition from which the next boot will be made, after reboot. To upload firmware to the devices you should use the copy command.
Syntax
firmware select <VALUE>
Parameters
<VALUE> - partitions:
- master - current partition;
- slave - redundant partition.
Privilege group
commands-firmware
Command mode
ROOT
Example
LTP-16N# firmware select slave
firmware update start
Run ONT firmware update with the specified file. To upload firmwares to the devices you should use the copy command.
Syntax
firmware update start interface ont <PORT-ID>[/ONT-ID] filename <NAME>
Parameters
<PORT-ID> - gpon port index in the range [1-16]. The parameter can be set by a range or enumeration (For example: interface ont 1-3 ot interface ont 1,3,5,7).
[ONT-ID] - ONT index in the range [1-128]. The parameter can be set by a range or enumeration (For example: interface ont 1/5-7 or interface ont 1-7/1,3,5,7).
<NAME> - file name. You can see the list of available files using the show firmware ont list command.
Privilege group
commands-interface-ont
Command mode
ROOT
Example
LTP-16N# LTP-16N# firmware update start interface ont 1/1 filename ntu-1-3.28.0-build645.fw.bin
firmware update stop
Stop ONT firmware updates on the channel.
Syntax
firmware update stop interface gpon-port <PORT-ID>
Parameters
<PORT-ID> - gpon port index in the range [1-16]. The parameter can be set by a range or enumeration (For example: interface ont 1-3 ot interface ont 1,3,5,7).
Privilege group
commands-interface-ont
Command mode
ROOT
Example
LTP-16N# LTP-16N# firmware update stop interface gpon-port 1