name
Set name for VLAN.
Syntax
name <VALUE>
no name
Parameters
<VALUE> - character set within a range [1-15].
Privilege group
config-vlan
Command mode
VLAN
Example
LTP-16N(config)(vlan-100)# name HSI
ip igmp last-member-query-interval
Set the request interval of the last participant for the given VLAN.
Syntax
ip igmp last-member-query-interval <VALUE>
no ip igmp last-member-query-interval
Parameters
<VALUE> - interval in the range [1-25] in seconds.
Default value
10
Privilege group
config-vlan
Command mode
VLAN
Example
LTP-16N(config)(vlan-100)# ip igmp last-member-query-interval 13
ip igmp query-interval
Set the sending interval of General Query for this VLAN.
Syntax
ip igmp query-interval <VALUE>
no ip igmp query-interval
Parameters
<VALUE> - interval in the range [30-600] in seconds.
Default value
125
Privilege group
config-vlan
Command mode
VLAN
Example
LTP-16N(config)(vlan-100)# ip igmp query-interval 300
ip igmp query-response-interval
Set the Query response wait time for this VLAN.
Syntax
ip igmp query-response-interval <VALUE>
no ip igmp query-response-interval
Parameters
<VALUE> - interval in the range [50-2000] in seconds.
Default value
100
Privilege group
config-vlan
Command mode
VLAN
Example
LTP-16N(config)(vlan-100)# ip igmp query-response-interval 1000
ip igmp robustness-variable
Set the reliability variable for this VLAN.
Syntax
ip igmp robustness-variable <VALUE>
no ip igmp robustness-variable
Parameters
<VALUE> - value in the range [2-7].
Default value
2
Privilege group
config-vlan
Command mode
VLAN
Example
LTP-16N(config)(vlan-100)# ip igmp robustness-variable 5
ip igmp snooping enable
Enable IGMP snooping for this VLAN.
Syntax
[no] ip igmp snooping enable
Parameters
The command does not contain parameters.
Default value
Disabled.
Privilege group
config-vlan
Command mode
VLAN
Example
LTP-16N(config)(vlan-100)# ip igmp snooping enable
ip igmp snooping mrouter
Set the port that is connected to a multicast router for the given VLAN.
Syntax
[no] ip igmp snooping mrouter <PORT-TYPE> <PORT-ID>
Parameters
<PORT-TYPE> - port type:
- gpon-port;
- 10G-front-port.
<PORT-ID> - port index. For gpon-port - [1-16], 10G-front-port - [1-8].
Privilege group
config-vlan
Command mode
VLAN
Example
LTP-16N(config)(vlan-100)# ip igmp snooping mrouter gpon-port 10
ip igmp snooping querier dscp
Set the DSCP value for the generated Query for the given VLAN.
Syntax
ip igmp snooping querier dscp <VALUE>
no ip igmp snooping querier dscp
Parameters
<VALUE> - value in the range [0-63].
Default value
0
Privilege group
config-vlan
Command mode
VLAN
Example
LTP-16N(config)(vlan-100)# ip igmp snooping querier dscp 10
ip igmp snooping querier enable
Enable Query processing for the given VLAN.
Syntax
[no] ip igmp snooping querier enable
Parameters
The command does not contain parameters.
Default value
Disabled.
Privilege group
config-vlan
Command mode
VLAN
Example
LTP-16N(config)(vlan-100)# ip igmp snooping querier enable
ip igmp snooping fast-leave
Enable immediate group disconnection for this VLAN.
Syntax
[no] ip igmp snooping querier fast-leave
Parameters
The command does not contain parameters.
Default value
Disabled.
Privilege group
config-vlan
Command mode
VLAN
Example
LTP-16N(config)(vlan-100)# ip igmp snooping querier fast-leave
ip igmp snooping querier ip-address
Set the value of the querier ip address for this VLAN.
Syntax
ip igmp snooping querier ip-address <IP>
no ip igmp snooping querier ip-address
Parameters
<IP> - IP address, specified as AAA. BBB. CCC. DDD, where each part takes the value [0..255].
Privilege group
config-vlan
Command mode
VLAN
Example
LTP-16N(config)(vlan-100)# ip igmp snooping querier ip-address 192.168.100.1
ip igmp snooping replace source-ip
Enable source-ip address spoofing in IGMP packets for this VLAN.
Syntax
ip igmp snooping replace source-ip <IP>
no ip igmp snooping replace source-ip
Parameters
<IP> - IP address, specified as AAA. BBB. CCC. DDD, where each part takes the value [0..255].
Privilege group
config-vlan
Command mode
VLAN
Example
LTP-16N(config)(vlan-100)# ip igmp snooping replace source-ip 192.168.100.2
ip igmp snooping static
Add a static IGMP group for the given VLAN on the specified port.
Syntax
[no] ip igmp snooping static <IP> interface <PORT-TYPE> <PORT-ID>
Parameters
<IP> - IP address, specified as AAA. BBB. CCC. DDD, where each part takes the value [0..255];
<PORT-TYPE> - port type:
- gpon-port;
- 10G-front-port.
<PORT-ID> - port index. For gpon-port - [1-16], 10G-front-port - [1-8].
Privilege group
config-vlan
Command mode
VLAN
Example
LTP-16N(config)(vlan-100)# ip igmp snooping static 224.224.100.1 interface 10G-front-port 3
ip igmp version
Set the IGMP version compatibility for this VLAN.
Syntax
[no] ip igmp version <VALUE>
Parameters
<VALUE> - IGMP versions:
- v1-only
- v2-only
- v3-only
- v1-v2
- v1-v3
- v2-v3
- v1-v2-v3
Default value
v1-v2-v3
Privilege group
config-vlan
Command mode
VLAN
Example
LTP-16N(config)(vlan-100)# ip igmp version v3-only