alias
This command configures shortened/specific commands in various command modes.
The use of a negative form (no) of the command removes the entry.
Syntax
alias {<ALIAS_NAME>} {<MODE>} {<COMMAND>}
no alias <ALIAS_NAME>
Parameters
<ALIAS_NAME> – new command name.
<MODE> – names of the command mode in which the new command is present:
- change-expired-password;
- config;
- config-aaa-das-profile;
- config-aaa-radius-profile;
- config-accsess-profile;
- config-acl;
- config-acl-rule;
- config-archive;
- config-bgp;
- config-bgp-af;
- config-bgp-group;
- config-bgp-neighbor;
- config-bridge;
- config-cellular-modem;
- config-cellular-profile;
- config-class-map;
- config-class-policy-map;
- config-das-server;
- config-dhcp-server;
- config-dhcp-vendor-id;
- config-dnat;
- config-dnat-pool;
- config-dnat-rule;
- config-dnat-ruleset;
- config-e1;
- config-gre;
- config-if-gi;
- config-ike-gw;
- config-ike-policy;
- config-ike-proposal;
- config-ip4ip4;
- config-ipsec-policy;
- config-ipsec-proposal;
- config-ipsec-vpn;
- config-ipv6-bgp-af;
- config-ipv6-bgp-group;
- config-ipv6-bgp-neighbor;
- config-ipv6-dhcp-server;
- config-ipv6-ospf;
- config-ipv6-ospf-area;
- config-ipv6-ospf-vlink;
- config-ipv6-pl;
- config-ipv6-wan-rule;
- config-ipv6-wan-target;
- config-ipv6-wan-target-list;
- config-keychain;
- config-keychain-key;
- config-l2tp-server;
- config-l2tpv3;
- config-ldap-server;
- config-line-console;
- config-line-ssh.
<COMMAND> – string of 96 characters long. CLI command. Entered completely, without abbreviations. To enter a command of several words, it is framed by double quotes.
Required privilege level
10
Command mode
CONFIG
Example:
esr(config)# alias qwe root "show version"
boot host auto-config
The command enables the load of router configuration by DHCP Option 150 and 67.
The use of a negative form (no) of the command disables the load of router configuration by DHCP Option 150 and 67.
Syntax
[no] boot host auto-config
Parameters
The command does not contain parameters.
Required privilege level
10
Default value
Disabled.
Command mode
CONFIG
Example:
esr(config)# boot host auto-config
hostname
The command allows to assign hostname for the router.
The use of a negative form (no) of the command sets the default router name.
Syntax
hostname <NAME>
no hostname
Parameters
<NAME> – router host name, set by the string of up to 64 characters.
Required privilege level
10
Default value
esr-10/esr-12v/esr-12vf/esr-14vf/esr-20/esr-21/esr-100/esr-200/esr-1000/esr-1200/esr-1500/esr-1510/esr-1700 – depends on router model.
Command mode
CONFIG
Example:
esr(config)# hostname router-1.eltex-co.ru
show cpu network-load
The command displays the load generated by network traffic.
Syntax
show cpu network-load
Parameters
The command does not contain parameters.
Required privilege level
1
Command mode
ROOT
Example:
esr# show cpu network-load CPU ID CPU load Heaviest session Session weight ------- --------- ----------------------- ------- 0 0 -- 0 1 49413 80.88.157.57 -> 9826 172.129.22.57 2 46812 80.88.157.75 -> 9895 172.129.22.75 3 49229 172.129.22.41 -> 9851 80.88.157.41 4 0 -- 0 5 53019 80.88.157.77 -> 9989 172.129.22.77 6 39699 80.88.157.79 -> 9863 172.129.22.79 7 49726 172.129.22.45 -> 9804 80.88.157.45 8 39789 172.129.22.61 -> 9779 80.88.157.61 9 36876 80.88.157.59 -> 9775 172.129.22.59 10 53041 172.129.22.5 -> 9679 80.88.157.5 11 49010 172.129.22.47 -> 9896 80.88.157.47 12 53082 172.129.22.13 -> 9650 80.88.157.13 13 63027 80.88.157.69 -> 9617 172.129.22.69 172 52722 80.88.157.73 -> 10001 172.129.22.73 15 55165 80.88.157.71 -> 9924
show cpu history
The command displays the history of CPU resources usage.
Syntax
show cpu history [ average | max ] [cpu {<CPU>}] [timer {<TIMER>}]
Parameters
average | max – specifies the history of which statistics should be displayed, averaged or maximum per interval. Without specifying this key, the history of average statistics is displayed (average)
<CPU> – it is possible to specify the number of a specific CPU by which the history of statistics on CPU resource utilization will be displayed. Without specifying the CPU medium, information will be displayed on all CPUs used by the system.
<TIMER> has the following parameters:
- hours – displays history in the last 72 hours;
- minutes – displays history in the last 60 minutes;
- seconds – displays history in the last 60 seconds;
- When timer is missing, 3 tables containing CPU usage statistics history are displayed
Required privilege level
5
Command mode
ROOT
Example:
esr# show cpu history max cpu 0 CPU0 Last 60 seconds: utilization, % 100 90 # 80 # 70 # 60 # 50 ## 40 ## 30 # ## 20 # ## 10 ############ ....|....|.. 0 25 50 time, 5 sec. Last 60 minutes: utilization, % 100 # 90 # 80 # 70 # # 60 ## # 50 ## # 40 ## # 30 ## # # # # # # 20 ## # # # # # # 10 ############################################################ ....|....|....|....|....|....|....|....|....|....|....|....| 0 5 10 15 20 25 30 35 40 45 50 55 60 time, min. Last 72 hours: utilization, % 100 # # # ## 90 # # ### ## 80 # # ### ## 70 # ##### ## 60 # ##### ## 50 # ##### ## 40 # ##### ## 30 ############################################# 20 ############################################# 10 ############################################# ....|....|....|....|....|....|....|....|....|....|....|....|....|....|.. 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 time, hours
show cpu processes
The command displays the use of resources by CPU processes.
Syntax
show cpu processes [ active | name <PROCESS_NAME> ]
Parameters
active – active processes list;
name – name of a certain process.
Required privilege level
5
Command mode
ROOT
Example:
esr# show cpu processes PID Name CPU 5s CPU 1m CPU 5m Memory Runtime --- ------------------------- ------- ------- ------- ------- -------- 2013 CLI 0.00% 0.00% 0.00% 0.40% -- 525 Cp-mgr 0.00% 0.00% 0.00% 0.08% -- 535 Service-mgr 0.00% 0.00% 0.00% 0.08% -- 532 Env-mgr 0.00% 0.03% 0.05% 0.11% 14 seconds 530 Alarm-mgr 0.00% 0.00% 0.00% 0.08% -- 529 Lb 0.00% 0.00% 0.00% 0.09% -- 528 Session-mgr 0.00% 0.00% 0.00% 0.11% -- 521 Ipc-hub 0.20% 0.03% 0.04% 0.09% 10 seconds 533 E1 0.00% 0.00% 0.00% 0.11% -- 522 Syslog-mgr 0.00% 0.00% 0.00% 0.09% -- 524 If-mgr 0.40% 0.35% 0.34% 0.17% 1 minute and 31 second 534 Systemdb 0.00% 0.02% 0.02% 0.14% 3 seconds 526 Oi-mgr 0.40% 0.40% 0.43% 1.14% 1 minute and 57 second 527 Cfgsync-mgr 0.00% 0.00% 0.00% 10.07% 1 second 531 Switch 0.00% 0.10% 0.11% 1.08% 34 seconds 1877 IPv6 Routing 0.00% 0.02% 0.01% 0.10% 1 second 1885 Routing 0.00% 0.00% 0.00% 0.10% 1 second
show cpu utilization
The command displays the use of CPU resources.
Syntax
show cpu utilization
Parameters
The command does not contain parameters.
Required privilege level
1
Command mode
ROOT
Example:
esr# show cpu utilization CPU Last Last Last 5 sec 1 min 5 min --- ------- ------- ------- 0 1.98% 6.75% 20.02% 1 67.50% 15.62% 6.88% 2 65.43% 15.53% 6.94% 3 69.29% 16.08% 7.08% 4 89.90% 20.79% 9.14% 5 74.95% 17.14% 7.49% 6 87.61% 20.18% 8.85% 7 87.41% 20.17% 8.85% 8 81.84% 19.03% 8.40% 9 84.82% 19.79% 8.73% 10 84.53% 19.78% 8.75% 11 83.02% 19.40% 8.58% 12 83.73% 19.55% 8.63% 13 76.56% 16.99% 7.25% 14 70.47% 16.00% 6.95% 15 68.39% 15.07% 6.40%
show system
The command displays the device environmental parameters.
Syntax
show system
Parameters
The command does not contain parameters.
Required privilege level
1
Command mode
ROOT
Example:
esr# show system System type: Eltex ESR-1000 Service Router System name: esr-1000 Software version: 1.0.7 build 118[53264b8] (date 22/12/2015 time 10:23:23) Hardware version: 1v3 System uptime: 4 minutes and 5 seconds System MAC address: A8:F9:4B:AA:03:A0 System serial number: NP01000050 Main power supply installed: Present Main power supply status: Ok Reserve power supply installed: Absent Fan Level: 46% Fan Table ~~~~~~~~~ Fan 1 Fan 2 Fan 3 Fan 4 ------ ----- ----- ----- ----- Status Ok Ok Ok Ok Temperature Table ~~~~~~~~~~~~~~~~~ CPU Sensor 1 Sensor 2 Sensor 3 -------------- -------- -------- -------- -------- Temperature, C 63 39 37 49 Memory Table ~~~~~~~~~~~~ Total, MB Used, MB Free, MB ----- ---------------- ---------------- ---------------- RAM 3798.25 1643.50 (44%) 2154.75 (56%) FLASH 20.00 1.06 (6%) 18.94 (94%)
show system id
The command displays the device serial number.
Syntax
show system id
Parameters
The command does not contain parameters.
Required privilege level
1
Command mode
ROOT
Example:
esr# show system id Serial number: NP01000023
system fan-speed
This command is supported only on ESR-100/200/1000/1200/1500/1510/1700 routers
The command defines the cooling system operating mode.
The use of a negative form (no) of the command sets the default value.
Syntax
system fan-speed { auto | max }
no system fan-speed
Parameters
auto – automatic control mode;
max – maximum cooling mode.
Default value
ESR-100/200 auto;
ESR-1000/1200/1500/1510/1700 max.
Required privilege level
10
Command mode
CONFIG
Example:
esr(config)# system fan-speed auto
system config-confirm timeout
The command defines the timeout to confirm a current configuration. If the configuration is not confirmed, rollback to a previously applied configuration will occur after timeout.
The use of a negative form (no) of the command sets the default value.
Syntax
system config-confirm timeout <TIME>
no system config-confirm timeout
Parameters
<TIME> – timeout of configuration redundancy confirmation, takes value in seconds [120..86400].
Default value
600
Required privilege level
10
Command mode
CONFIG
Example:
esr(config)# system config-confirm timeout 1200
system utilization softgre disable
The command is used to disable counting of SoftGRE tunnels occupancy.
The use of a negative form (no) of the command sets the default value.
Syntax
[no] system utilization softgre disable
Parameters
The command does not contain parameters.
Default value
Counting is enabled.
Required privilege level
10
Command mode
CONFIG
Example:
esr(config)# system utilization softgre disable