Eltex Documentation EN
Быстрые ссылки
Дерево страниц
Перейти к концу метаданных
Переход к началу метаданных

interface front-port

Switch to the front ports configuration mode.

Syntax             
[no] interface front-port <ID>
Parameters

<ID> — port index in the range [1-8]. The parameter can be a range or an enumeration (for example: interface front-port 1-5 or interface front-port 1,5).

Privilege group
config-interface-front-port
Command mode

CONFIG

Example
LTP-16N(configure)# interface front-port 1-5

channel-group port-channel

Add interface to the aggregation group. When setting force, port settings will be replaced with the group settings.

Syntax             
[no] channel-group port-channel <ID>
Parameters

<ID> — aggregation group index.

Privilege group
if-front-view
Command mode

IF-FRONT

Example
LTP-16N(config)(if-front-3)# channel-group port-channel 1

shutdown

Disable interface.

Syntax             
[no] shutdown
Parameters

The command does not contain any parameters.

Default value
Enabled
Privilege group
if-front-view
Command mode

IF-FRONT

Example
LTP-16N(config)(if-port-channel-1)# shutdown

switchport mode

Set VLAN operation mode.

Syntax             
[no] switchport mode <VALUE>
Parameters

<VALUE> — operation modes:

  • trunk  — interface that accepts only tagged traffic. 
Default value
trunk
Privilege group
if-front-view
Command mode

IF-FRONT

Example
LTP-16N(config)(if-front-3)# switchport mode trunk

vlan allow

Allow VLAN passage on the port-channel.

Syntax
[no] vlan allow <VLAN-ID>
Parameters

<VLAN-ID> — vlan id in the range of [1-4094]. 

Privilege group
if-front-view
Command mode

IF-FRONT

Example
LTP-16N(config)(if-front-1)# vlan allow 100

lldp mode

Set LLDPDU sending mode.

Syntax
lldp mode <VALUE>
[no] lldp mode
Parameters

<VALUE> — LLDP operation mode. May take values: 

  • disabled — disabled;
  • transmit-only — only transmit packets;
  • receive-only — only receive packets;
  • transmit-receive — both transmit and receive.
Default value
disabled
Privilege group
if-front-view
Command mode

IF-FRONT

Example
LTP-16N(config)(if-front-3)# lldp mode transmit-receive

lldp optional-tlv

Add TLV to transmitted LLDPDU.

Syntax
lldp optional-tlv <VALUE>
[no] optional-tlv [<VALUE>|all]
Parameters

<VALUE> — LLDP operation mode. May take values: 

  • port-description;
  • system-name;
  • system-descriptio;
  • system-capabilities;
  • management-address.
Privilege group
if-front-view
Command mode

IF-FRONT

Example
LTP-16N(config)(if-front-3)# lldp optional-tlv management-address

  • Нет меток