interface ont
Switch to the ont configuration mode.
Syntax
[no] interface ont <PORT-ID>[/ONT-ID]
Parameters
<PORT-ID> — pon port index in the range of [1-16]. The parameter can be set by a range or enumeration (for example: interface ont 1-3 or interface ont 1,3,5,7);
[ONT-ID] — ONT index in the range of [1-128]. The parameter can be set by a range or enumeration (for example: interface ont 1/5-7 or interface ont 1-7/1,3,5,7).
Privilege group
сonfig-interface-ont
Command mode
CONFIG
Example
LTP-16N(configure)# interface ont 1/68,69
broadcast-filter
Enable filtering of tagged broadcast traffic on broadcast GEM.
Syntax
[no] broadcast-filter
Parameters
The command does not contain any parameters.
Default value
Enabled
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# broadcast-filter
description
Set interface description.
Syntax
description <VALUE>
no description
Parameters
<VALUE> — characters set in the range from 1 to 127.
Privilege group
config-interface-ont
Command mode
PROFILE-ONT
Example
LTP-16N(config)(if-ont-1/1)# description "VPN"
multicast-filter
Enable filtering of tagged multicast traffic on multicast GEM.
Syntax
[no] multicast-filter
Parameters
The command does not contain any parameters.
Default value
Enabled
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# multicast-filter
password
Set PON password for ONT.
Syntax
password <VALUE>
no password
Parameters
<VALUE> — string of 10 characters length max.
Default value
0000000000
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# password 1111111111
profile ports
Set ports profile.
Syntax
profile ports <VALUE>
no profile ports
Parameters
<VALUE> — profile name.
Default value
profile ports ports1
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# profile ports HSI-BRIDGE
profile management
Set management profile.
Syntax
profile management <VALUE>
no profile management
Parameters
<VALUE> — profile name.
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# profile management ACS
serial
Set ports profile.
Syntax
serial <VALUE>
no serial
Parameters
<VALUE> — ONT serial number in AAAAXXXXXXXX or XXXXXXXXXXXXXXXX format, where A are latin uppercase letters, X are hexadecimal digits [0-F].
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# serial ELTX6203370C
service 〈ID〉 profile cross-connect
Set cross-connect profile for service.
Syntax
service <ID> profile cross-connect <VALUE>
no service <ID> profile cross-connect
Parameters
<ID> — service index [1-32];
<VALUE> — profile name.
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# service 1 profile cross-connect HSI
service 〈ID〉 profile dba
Set DBA profile for service.
Syntax
service <ID> profile dba <VALUE>
no service <ID> profile dba
Parameters
<ID> — service index [1-32];
<VALUE> — profile name.
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# service 1 profile dba DBA-HSI
rf-port-state
ONT RF port management.
Syntax
rf-port-state <VALUE>
no rf-port-state
Parameters
<VALUE> — RF port state. Possible values:
- disabled;
- enabled;
- no-change.
Default value
Disabled
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# profile management ACS
iphost management static 〈SETTINGS〉
Set static iphost network settings for the management ont profile.
Syntax
iphost management static <SETTINGS>
no iphost management static <SETTINGS>
Parameters
<SETTINGS> — network settings that should be configured:
- ip — management ont profile IP address. Specified in format of AAA.BBB.CCC.DDD;
- mask — management ont profile netmask. Specified in format of AAA.BBB.CCC.DDD;
- gateway — management ont profile gateway address. Specified in format of AAA.BBB.CCC.DDD.
Default values
ip — 0.0.0.0;
mask — 0.0.0.0;
gateway — 0.0.0.0.
Privilege group
config-interface-ont
Command mode
IF-ONT
Example
LTP-16N(config)(if-ont-1/1)# iphost management static ip 192.168.1.5 gateway 192.168.1.1
shutdown
ONT shutdown.
Syntax
[no] shutdown
Parameters
The command does not contain any parameters.
Privilege group
config-interface-ont
Default value
no shutdown
Command mode
config-interface-ont
Example
LTP-16N(config)(if-ont-1/1)# shutdown