Abstract
This guidance describes CLI commands for LTP-16N optical line terminal (hereinafter referred to as device) administrator.
Command Line Interface (CLI) allows to perform the device management and monitor its operation and status. You will require the PC application supporting Telnet or SSH protocol operation or direct connection via the console port (e.g. Minicom).
Target audience
CLI command reference guide is dedicated to the technical staff that performs the LTP-16N terminal configuration and monitoring using the CLI interface. Qualified technical personnel should be familiar with the operation basics of TCP/IP protocol stacks and Ethernet/GPON networks design concepts.
Notes and warnings
Warnings are used to inform the user about harmful situations for the device and the user alike, which could cause malfunction or data loss.
Abbreviations used
- ARP — Address Resolution Protocol
- DBA — Dynamic bandwidth allocation
- DHCP — Dynamic Host Configuration Protocol
- FTP — File Transfer Protocol
- FW — Firmware
- GPON — Gigabit Passive Optical Network
- HTTP — HyperText Transfer Protocol
- ICMP — Internet Control Message Protocol
- IP — Internet Protocol
- MAC — Media Access Control
- OLT — Optical Line Terminal
- ONT — Optical Network Terminal
- ONU — Optical Network Unit
- SFP — Small Form-factor Pluggable
- SSH — Secure Shell
- TFTP — Trivial File Transfer Protocol
- URL — Uniform Resource Locator
- VLAN — Virtual Local Area Network