logging
Switch to logging configuration mode.
Syntax
logging
Parameters
The command does not contain any parameters.
Privilege group
config-logging
Command mode
CONFIG
Example
LTP-16N(configure)# logging
file size
Set the system log size.
Syntax
file size <VALUE>
no file size
Parameters
<VALUE> — log size in bytes, range of values [1000-300000].
Default value
3000000
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# file size 20000
permanent
Configuring the saving of syslog files to non-volatile memory.
Syntax
[no] permanent
Parameters
The command does not contain any parameters.
Default value
Disabled
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# permnanent
remote server
Configuring syslog server address to which the logs will be sent. It is possible to specify up to three servers with unique IP addresses.
Syntax
remote server ip <IP> [PORT]
no remote server ip <IP>
Parameters
- <IP> — IP address specified as AAA. BBB. CCC. DDD, where each part takes the value [0..255];
- [PORT] — port, may take values [1-65535].
Default value
<IP> — not specified;
[PORT] — 514.
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# remote server ip 192.168.100.5 port 1000
remote loglevel
Setting the log level to be sent to the syslog server.
Syntax
remote loglevel <LOGLEVEL>
no remote loglevel
Parameters
<LOGLEVEL> — logging level. Values: [ critical | error | warning | notice | info | debug ].
Default value
notice
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# remote loglevel debug
console loglevel
Setting the logging level for console connection.
Syntax
console loglevel <LOGLEVEL>
no console loglevel
Parameters
<LOGLEVEL> — logging level. Values: [ critical | error | warning | notice | info | debug ].
Default value
notice
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# console loglevel debug
file loglevel
Setting the log level for syslog file.
Syntax
file loglevel <LOGLEVEL>
no file loglevel
Parameters
<LOGLEVEL> — logging level. Values: [ critical | error | warning | notice | info | debug ].
Default value
notice
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# file loglevel debug
kernel
Setting the log level for kernel.
Syntax
kernel loglevel <LOGLEVEL>
no kernel loglevel
Parameters
<LOGLEVEL> — logging level. Values: [ critical | error | warning | notice | info | debug ].
Default value
notice — for module and all submodules
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# kernel loglevel debug
module cli
Setting the log level for CLI module.
Syntax
module cli [SUBMODULE] loglevel <LOGLEVEL>
no cli [SUBMODULE] loglevel
Parameters
- [SUBMODULE] — name of the submodule for which the logging will be changed. Values: [ ipc | cfgdb | hash | log ];
- <LOGLEVEL> — logging level. Values: [ critical | error | warning | notice | info | debug ].
Default value
notice — for module and all submodules
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# module cli loglevel debug LTP-16N(logging)# module cli ipc loglevel debug
module dna
Setting the log level for DNA module.
Syntax
module dna [SUBMODULE [PORT-ID]] loglevel <LOGLEVEL>
no dna [SUBMODULE [PORT-ID]] loglevel
Parameters
- [SUBMODULE] — name of the submodule for which the logging will be changed. Value: [pon-port | conf-task | olt | ont | bcm-api | tools | loglib | cfgdb ];
- [PORT-ID] — interface index for the pon-port and ont submodules:
- pon-port — value <1-16>. With capability to set ranges and/or enumerations.
- ont — value <1-16/1-128>. The first number is the port index, the second is the ONT index. With capability to set ranges and/or enumerations.
- <LOGLEVEL> — logging level. Values: [ critical | error | warning | notice | info | debug ].
Default value
notice — for module and all submodules
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# module dna loglevel debug LTP-16N(logging)# module dna ont 1/1-5,10 loglevel debug
module fsm-pon
Setting the log level for FSM module.
Syntax
module fsm-pon [SUBMODULE] loglevel <LOGLEVEL>
no fsm-pon [SUBMODULE] loglevel
Parameters
- [SUBMODULE] — name of the submodule for which the logging will be changed. Values: [ main-queue | callback-queue | info-queue | timers | task-queue | omci | listener | cfgdb ];
- <LOGLEVEL> — logging level. Values: [ critical | error | warning | notice | info | debug ].
Default value
notice — for module and all submodules
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# module fsm-pon loglevel debug LTP-16N(logging)# module fsm-pon timers loglevel debug
module igmp
Setting the log level for IGMP module.
Syntax
module igmp [SUBMODULE] loglevel <LOGLEVEL>
no igmp [SUBMODULE] loglevel
Parameters
- [SUBMODULE] — name of the submodule for which the logging will be changed. Values: [ main-task | conf-task | cfgdb | msg-queue | timers ];
- <LOGLEVEL> — logging level. Values: [ critical | error | warning | notice | info | debug ].
Default value
notice — for module and all submodules
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# module igmp loglevel debug LTP-16N(logging)# module igmp conf-task loglevel debug
module logmgr
Setting the log level for log-mgr module.
Syntax
module logmgr [SUBMODULE] loglevel <LOGLEVEL>
no logmgr [SUBMODULE] loglevel
Parameters
- [SUBMODULE] — name of the submodule for which the logging will be changed. Values: [ cfgdb ];
- <LOGLEVEL> — logging level. Values: [ critical | error | warning | notice | info | debug ].
Default value
notice — for module and all submodules
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# module logmgr loglevel debug LTP-16N(logging)# module logmgr cfgdb loglevel debug
module lldp
Setting the log level for lldp module.
Syntax
module lldp [SUBMODULE] loglevel <LOGLEVEL>
no lldp [SUBMODULE] loglevel
Parameters
- [SUBMODULE] — name of the submodule for which the logging will be changed. Values: [ cfgdb | task | timers | queue ];
- <LOGLEVEL> — logging level. Values: [ critical | error | warning | notice | info | debug ].
Default value
notice — for module and all submodules
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# module lldp loglevel debug LTP-16N(logging)# module lldp cfgdb loglevel debug
module usermgr
Setting the log level for user-mgr module.
Syntax
module usermgr [SUBMODULE] loglevel <LOGLEVEL>
no usermgr [SUBMODULE] loglevel
Parameters
- [SUBMODULE] — name of the submodule for which the logging will be changed. Values: [ cfgdb ];
- <LOGLEVEL> — logging level. Values: [ critical | error | warning | notice | info | debug ].
Default value
notice — for module and all submodules
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# module usermgr loglevel debug LTP-16N(logging)# module usermgr cfgdb loglevel debug
module dhcp
Setting the log level for DHCP module.
Syntax
module dhcp [SUBMODULE] loglevel <LOGLEVEL>
no dhcp [SUBMODULE] loglevel
Parameters
- [SUBMODULE] — name of the submodule for which the logging will be changed. Values: [ cfgdb | task | timers | queue ];
- <LOGLEVEL> — logging level. Values: [ critical | error | warning | notice | info | debug ].
Default value
notice — for module and all submodules
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# module dhcp loglevel debug LTP-16N(logging)# module dhcp cfgdb loglevel debug
module snmp
Setting the log level for SNMP module.
Syntax
module dhcp [SUBMODULE] loglevel <LOGLEVEL>
no dhcp [SUBMODULE] loglevel
Parameters
- [SUBMODULE] — name of the submodule for which the logging will be changed. Values: [ cfgdb | ipc | custom-layer ];
- <LOGLEVEL> — logging level. Values: [ critical | error | warning | notice | info | debug ].
Default value
notice — for module and all submodules
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# module snmp loglevel debug LTP-16N(logging)# module snmp ipc loglevel debug
module pppoe
Setting the log level for PPPoE module.
Syntax
module pppoe [SUBMODULE] loglevel <LOGLEVEL>
no pppoe [SUBMODULE] loglevel
Parameters
- [SUBMODULE] — name of the submodule for which the logging will be changed. Values: [ cfgdb | queue | task ];
- <LOGLEVEL> — logging level. Values: [ critical | error | warning | notice | info | debug ].
Default value
notice — for module and all submodules
Privilege group
config-logging
Command mode
LOGGING
Example
LTP-16N(logging)# module pppoe loglevel debug LTP-16N(logging)# module pppoe ipc loglevel debug