Using Command Line Interface (CLI) for configuration and monitoring 1.8.1

quit

-

none

To end the current CLI session

-

help

-

none

To display CLI syntax hints

-

ping

<options>

<value>

IP-address

none

-

repeat

<value>

int:1-2147483647

none

Amount of icmp echo requests to be sent (default: 5)

-

payload

<value>

int:0-65535

none

Size of data block sent in one icmp packet as payload, bytes (default: 56)

-

df-bit

-

none

Setting don't fragment bit
(default: not set)

-

tos

<value>

int:0-63

none

Type-of-service label from which the icmp packet will be sent (default: 0)

-

timeout

<value>

int:1-60

none

Waiting time for response to sent icmp echo request, sec (default: 2)

-

traceroute

<options>

<value>

IP-address

none

-

df-bit

-

none

Setting don't fragment bit
(default: not set)

-

repeat

<value>

int: 1-8

none

Amount of packets sent with unchanged 'ttl' (default: 2)

-

timeout

<value>

int:0-10

none

Waiting time for response to sent udp/icmp packet, sec (default: 2)

-

ttl

<value>

int:1-255

none

Maximum amount of hops on the route (default: 255)

-

tos

<value>

int:0-255

none

Type-of-service label from which the udp/icmp packet will be sent (default: 0)

-

icmp

-

none

Use ICMP echo request instead of UDP datagrams (default: do not use)

-

port

<value>

int:1-65535

none

UDP port number for sending UDP datagrams (default: 33434)

-

size

<value>

int:40-32768

none

Full length of traceroute packets, bytes (default: 100)

-

show

..

..

none

-

system

-

none

Viewing the software version

-

hwaddr

-

none

Viewing the current MAC address on the WAN port

-

ipaddr

-

none

Viewing the current IP address on the WAN port

-

netmask

-call

none

Viewing the current netmask on the WAN port

-

Viewing the current MAC address on the MGMT port

Viewing the current IP address on the MGMT port

network

-

none

Viewing the configuration of network interfaces

-

version

-

none

Viewing the device configuration version

-

voiceport

..

..

none

-

status

<value>

int:1-8

none

Viewing the FXS port status

-

configuration

<value>

int:1-8

priv

Viewing the FXS Port Configuration

-

..

..

none

-

active

..

none

Viewing active calls

-

history

..

none

Viewing call history (for settings, see Call History Submenu)

-

enable

-

none

Enabling privileged mode

-

disable

-

priv

Disabling privileged mode

-

passwd

priv

Setting passwords for admin/user users (password is valid only for access via terminal and WEB)

-

admin

<value>

priv

Setting the password for the admin user

-

user

<value>

priv

Setting the password for the user user

pbx

..

..

priv

-

restart

-

priv

Restart the PBX application (all current voice connections will be reset)

-

reset

<value>

-

priv

Factory reset (the device will reboot automatically)

-

backup

<value1> <value2>

IP-address

str:64 sym

priv

Saving a configuration backup to a remote tftp server

-

restore

<value1> <value2>

IP-address

str:64 sym

priv

Restoring a configuration backup from a tftp server

-

test

..

..

priv

-

voiceport

<value>

int:1-8

priv

Starting subscriber line testing

-

reboot

priv

Rebooting the device

-

route

<value>

-n/-e/-A/add/del/delete

priv

Managing the routing table

-

save

-

priv

Writing the configuration to non-volatile memory

-

shell

-

priv

Switching to shell mode

-

show

..

..

none

-

system

-

none

Viewing the software version

-

hwaddr

-

none

Viewing the current MAC address on the WAN port

-

ipaddr

-

none

Viewing the current IP address on the WAN port

-

netmask

-

none

Viewing the current netmask on the WAN port

-

Viewing the current MAC address on the MGMT port

Viewing the current IP address on the MGMT port

version

-

none

Viewing the device configuration version

-

configuration

-

priv

Viewing full device configuration

-

voiceport

..

..

none

-

status

<value>

int:1-8

none

Viewing the FXS port status

-

configuration

<value>

int:1-8

priv

Viewing the FXS Port Configuration

-

voiceprofile

<value>

int:1-8

priv

Viewing the  FXS profile information

-

switch

-

none

Viewing the status of Ethernet ports

-

call

..

..

none

-

active

none

Viewing active calls

-

history

none

Viewing call history (for settings, see Call History submenu)

-

proc

-

priv

Viewing the list of running processes

-

history

-

priv

Viewing CLI command history

-

upgrade

..

..

priv

-

image

<value1> <value2>

IP-address

str:64 sym

priv

Device software updates

-

configure

(dir)

priv

Device configuration mode

-

do

-

priv

Allows root mode commands to be executed from any other mode of the command interface

-

exit

-

priv

Exiting the device configuration mode

-

no

<command>

-

priv

Using a negative command

-

network

(dir)

priv

Configuration of the network interface

-

do

-

priv

Allows root mode commands to be executed from any other mode of the command interface

-

no

<command>

-

priv

Using the negative command

-

exit

-

priv

Exiting the network interface configuration mode

-

dhcp

-

priv

The network interface is configured using DHCP protocol

Use Static protocol on the WAN port

dns

<value>

IP-address

priv

Set the IP address of the first external DNS server

Set the default address of the first DNS server (default: no address specified)

dns2

<value>

IP-address

priv

Set the IP address of the second external DNS server

Set the default address of the second DNS server (default: no address specified)

ipaddr

<value>

IP-address

priv

Setting the network interface IP address, default gateway address, subnet mask

Set the factory IP address of the network interface (default: address not set), factory default gateway address (default: address not set), factory subnet mask value (default: mask not set)

netmask

<value>

netmask

priv

Setting the subnet mask

-

ntp

..

..

priv

enable

-

priv

Enable the NTP protocol

Disable the NTP protocol

ipaddr

<value>

address

priv

Setting the address of the remote time synchronization server

Set the factory default value of the NTP server address (default: pool.ntp.org)

timezone

<value>

-12..+12

priv

Setting the time zone

Set the factory time zone value (default: GMT+3)

snmp

..

..

priv

-

enable

-

priv

Enable SNMP protocol

Disable SNMP protocol

trapsink

<value>

address

priv

SNMPv1-trap trap receiver address

Set the factory default address of the trap receiver (default: no address set)

trapsink_v2

<value>

IP-address

priv

SNMPv2-trap trap receiver address

Set the factory default address of the trap receiver (default: no address set)

rocomm

<value>

str:96 sym

priv

Password for reading parameters

Set factory default value for parameter read password (default: public)

rwcomm

<value>

str:96 sym

priv

Password for writing parameters

Set factory default password for reading and writing parameters (default: private)

trapcomm

<value>

str:96 sym

priv

The password contained in the ladders

Set the factory default value of the password contained in traps (default: trap)

telnet

..

-

priv

Configuring telnet parameters

..

ssh

-

priv

Configuring ssh parameters

web

..

..

priv

Configuring HTTP and HTTPS settings

-

devname

<value>

str:96 sym

priv

Device name

Set the default device name (default: TAU-8N.IP)

sip

..

..

priv

-

profile N

int:1-8

priv

SIP profile configuration mode N

-

do

-

priv

Allows root mode commands to be executed from any other mode of the command interface

-

no

<command>

-

priv

Using a negative command

-

exit

-

priv

Exiting the SIP profile N configuration mode

-

proxy

..

..

priv

-

mode

<value>

none|park|home

priv

Set the mode of operation with SIP proxy server

Set factory mode of operation with SIP proxy server (default: Homing)

address

<value1>

<value2>

int:1-5

address[:port]

priv

SIP proxy server address

Set the default address of the SIP proxy server (default: no address)

registrar

..

..

priv

-

address

<value1>

<value2>

int:1-5

address[:port]

priv

SIP registrar server address

Set the default address of the SIP registrar server (default: no address)

enable

<value>

int:1-5

priv

Allow registration on the SIP server

Deny registration on the SIP server

interval

<value>

int:30-10000

priv

Set the registration repeat interval, sec

Set the default logging repeat interval value (default: 30)

domain

<value>

priv

Set SIP domain

Do not use SIP domain

domain_to_reg

priv

Enable the use of SIP domain when registering to a SIP server

Deny the use of SIP domain when registering to a SIP server

expires

<value>

priv

Set the re-registration time period on the SIP server, sec

Set the default re-registration time period on the SIP server (default: 1800)

codec

..

..

priv

-

list

<value>

List of voice codecs separated by a "space" symbol

g711a, g711u, g723, g729, g729a, g729b, g726_16, g726_24, g726_32, g726_40, aal2_g726_16, aal2_g726_24, aal2_g726_32, aal2_g726_40

priv

List of voice codecs in priority order

-

ptime

<value1>

<value2>

Value1: 

g711, g729, g723, g726_16, g726_24, g726_32, g726_40, aal2_g726_16, aal2_g726_24, aal2_g726_32, aal2_g726_40

value2: 10-90

priv

Set packetization time for voice codecs, ms

Set the default packetization value

(default: g729 - 20 ms, g711 - 20 ms, g723 - 30 ms, g726_16 - 20 ms, g726_24 - 20 ms, g726_32 - 20 ms, g726_40 - 20 ms, aal2_g726_16 - 20 ms, aal2_g726_24 - 20 ms, aal2_g726_32 - 20 ms, aal2_g726_40 - 20 ms)

dtmfmode

..

priv

Set the default method of dial-up signaling (default: rfc2833)

inband

priv

Use in-band transmission of pre-dial digits in RTP speech packets

-

rfc2833

priv

Use pre-dial digits transmission according to RFC2833 as dedicated load in RTP speech packets

-

info

<value>

dtmf-relay|dtmf|audio

priv

Set the method for transmitting pre-dial characters

-

fax

..

..

priv

-

detect

<value>

none|caller|callee|both

priv

Set the fax signal detection mode

Set the fax signal detection mode by default (default: both sides)

codec

<value1>

<value2>

Value1: g711a|g711u|t38|none

Value2: int:0-2

priv

Set the codec for fax transmission

Set the default codec for fax transmission (default: g711u)

enable_in_t38

priv

Allow transition to T.38

Deny transition to T.38

name

<value>

str:96 sym

priv

Set the name of the SIP profile

Set the default SIP profile name

ecan

..

..

priv

-

type

<value>

off|simple|speex|webrtc

priv

Set the mode of the echo compensation function

Set the default mode of the echo compensation function (default: simple)

tail

<value>

int:2-200

priv

Set the dispersion time of the reflected signal, ms

Set the default reflected signal dispersion time, ms (default: 125)

enable

priv

Enable the use of SIP profile

Deny the use of SIP profile

vad

-

priv

Enable voice activity detector

Disable the voice activity detector

dialplan

..

..

priv

-

ltimer

<value>

int:1-30

priv

Set L-timer value

Set the factory value of the L-timer (default: 15)

stimer

<value>

int:1-10

priv

Set S-timer value

Set factory S-timer value (default: 8)

rule

<value>

str:1000 sym

priv

Set the numbering plan

Set the default numbering plan (default: [xABCD*#].S)

udp

..

..

priv

-

rtpport

..

..

priv

-

sip

..

..

priv

-

min

<value>

int:1024-65535

priv

Set the value of the lower limit of the range of UDP ports for RTP transmission

Set the value of the lower limit of the UDP port range for RTP transmission by default (default: 16384)

max

<value>

int:1024-65535

priv

Set the value of the upper limit of the range of UDP ports for RTP transmission

Set the default value of the upper limit of the UDP port range for RTP transmission (default: 32767)

voice port N

int:1-8

priv

FXS N port configuration mode

-

do

-

priv

Allows root mode commands to be executed from any other mode of the command interface

-

no

<command>

-

priv

Using a negative command

-

exit

-

priv

Exiting the FXS port configuration mode N

-

username

<value>

str:96 sym

priv

Set the user name

Set the default user name (default: 00N)

authname

<value>

str:96 sym

priv

Set the user name for authentication

Set the default user name for authentication (default: not set)

password

<value>

str:96 sym

priv

Set the password for authentication

Reset password for authentication

phone

<value>

priv

Set the subscriber port number

Set the default subscriber port number (default: 00N)

profile

..

..

priv

-

sip

<value>

int:1-8

priv

Set the SIP profile for the FXS port

Set SIP profile profile 1 for FXS port

disable

-

priv

Disable FXS port

Enable FXS port

callerid

<value>

off|dtmf|fsk_bell202|fsk_v23

priv

Set the method for identifying the caller

Disable caller identification

flash

..

..

priv

-

min

<value>

int:70-1000

priv

Set the value of the lower limit of the flash event detection range, ms

Set the default value of the lower limit of the flash event detection range, ms (default: 200)

max

<value>

int:min-200

priv

Set the value of the upper limit of the flash event detection range, ms

Set the default value of the upper limit of the flash event detection range, ms (default: 500)

hybrid

..

..

priv

-

rx

<value>

int: -200 - 200

priv

Set the value of diff-system gain at reception, dB

Set default value (default: -70)

tx

<value>

int: -200 -200

priv

Set the value of diff-system gain on transmission, dB

Set default value (default: 0)

stopdial

-

priv

Enable the # symbol to end dialing function

Disable the # symbol to end dialing function

timer

..

duration

<value>

int: 0-1000

Set the dialing timer value, ms

Set the default dialing timer value, ms (default: 0 - no limit)

waitanswer

<value>

int: 0-1000

Set the call answer timer value

Set the default call answer timer value, ms
(default: 0 - no limit)

tunnel

<value>

do

Allows root mode commands to be executed from any other mode of the command interface

exit

Exiting the tunnel profile configuration mode

l2tp

Configuration mode of the l2tp tunnel

do

Allows root mode commands to be executed from any other mode of the command interface

exit

Exiting the tunnel-l2tp profile configuration mode

timers

…

echointerval

<value>

Int: 0-65535

Set the LCP echo interval value to monitor the PPP connection status

pppoe

Configuration mode of the pppoe tunnel

do

Allows root mode commands to be executed from any other mode of the command interface

exit

Exiting the tunnel-ppoe profile configuration mod

timers

…

echointerval

<value>

Int: 0-65535

Set LCP echo-interval values to monitor the PPP connection status