Intended use
VP-15, VP-15P — IP phones providing voice services and PC connection to IP network via only one cable. The devices have advanced functionality, high quality, and universal style.
VP-15 and VP-15P are designed for organizations with high requirements to transmitted voice data, stability and usability.
VP-15P supports Power over Ethernet (PoE) technology.
Device design and operating principle
VP -15(P) IP phone includes the following subsystem:
- controller featuring:
- flash-memory — 16MВ;
- SDRAM — 128MВ;
- codec (ADC/DAC);
- liquid crystal display with 128x64 px resolution;
digital keyboard with additional functional keys;
1 x LAN: RJ-45 10/100BASE-T;
1 x PC: RJ-45 10/100BASE-T;
1 x Handset: RJ-9 (4P4C) for connecting a handset;
1 x Headset: RJ-9 (4P4C) for connecting a headset.
Design diagram for device is depicted in the figure below.
The device runs under Linux operating system. Basic control functions are performed by processor which enables IP packet routing, VoIP operation, etc.
Main specifications
| General parameters | |
|---|---|
| Power supply |
|
| Power consumption | up to 4 W (max. current consumption is 0.8 А) |
| Operating temperature range | from +5 to +40°С |
| Relative humidity at 25°С | up to 80% |
| Dimensions (WxHxD) | 205x86x210 mm |
| Weight | up to 0.80 kg |
| Interfaces |
|
Ethernet LAN interface specification | |
| Number of ports | 1 |
| Electric port | RJ-45 |
| Data transmission rate |
|
| Standard support | BASE-T |
Ethernet PC interface specification | |
| Number of ports | 1 |
| Electric port | RJ-45 |
| Data transmission rate |
|
| Standard support | BASE-T |
Main features and capabilities
VoIP capabilities | |
|---|---|
Supported protocols |
|
| Quantity of accounts | 2 |
| Key features |
|
| Operation behind NAT |
|
| Security |
|
| Voice features |
|
| DTMF signals detection and generation |
|
Codecs |
|
| Supplementary services |
|
| Network features | |
| Key features |
|
| Protocols |
|
| Support for PPPoE |
|
Support for DHCP option | 1 - Subnet Mask |
| Support for QoS mechanisms |
|
| Support for DNS |
|
| Support for NTP |
|
| Network access limitation |
|
| Routing |
|
| Network discovery | LLDP, LLDP MED |
Management and monitoring | |
| Key features |
|
| Interfaces |
|
Debug information output |
|
| Loading/updating of software and configuration |
|
Design
VP-15(P) IP phones is enclosed into 205x86x210 mm.
Top panel of the device. Light indication
The figure below shows VP-15(P) top panel layout.
VP-15(P) top panel is equipped with LED indicators:
Front panel element | Description | LED state | Device state | |
|---|---|---|---|---|
1 |
| Soft keys indicators | Flexibly configured
| |
2 |
| System indicator | Flexibly configured
| |
3 |
| New message indicator | Flashes green | There are unread messages or new voice messages |
| Off | There are no unread messages or new voice messages | |||
4 |
| Headset indicator | Flashes green | Headset is active |
| Off | Headset is inactive | |||
| 5 |
| Mute indicator | Flashes green | Mute mode is activated for the current call |
| Off | Mute mode is not activated | |||
| 6 |
| Speakerphone indicator | Flashes green | Speakerphone mode is activated |
| Off | Speakerphone mode is not activated | |||
Rear panel of the device
The figure below shows VP-15(P) rear panel layout.
Rear panel element | Description | |
|---|---|---|
7 | DC | port for power adapter connection, 5V 2A |
8 | PC | 10/100BASE-T Ethernet port (RJ-45) for connection to a PC |
9 | Reset | Button to restart/reset the device |
| 10 | LAN | 10/100BASE-T Ethernet port (RJ-45) for connection to LAN |
| 11 | Headset | RJ-9 port for headset connection |
| 12 | Handset | RJ-9 port for handset connection |
Status indication on graphic display
Status indication on graphic display
| Number | Description |
|---|---|
| 1 | Indicator of voice interface:
|
| 2 | Current date and time |
| 3 | Names of enabled accounts. If accounts do not have names, phone numbers are displayed |
| 4 | Actions taken upon pressing soft-keys |
Delivery package
VP-15(P) standard delivery package includes:
- IP phone VP-15(P);
- Handset and cable for handset connection;
- 220/5V 2А power adapter;
- RJ-45 cable;
- Information on the IP-phone and warranty booklet.