Eltex Documentation EN
Быстрые ссылки
Дерево страниц
Перейти к концу метаданных
Переход к началу метаданных

profile pppoe-ia

Switch to the pppoe-ia profile configuration mode.

Syntax
[no] profile pppoe-ia <NAME>
Parameters

<NAME> — profile name. Set of characters in the range from 1 to 15.

Privilege group
config-pppoe
Command mode

CONFIG

Example
LTP-16N(configure)# profile pppoe-ia PPPOE-PROFILE

circuit-id format

Sets circuit-id format for the current profile.

Syntax

circuid-id format <VALUE>
no circuid-id format

Parameters

<VALUE> — format parameter. String 240 characters long max. May take values:

  • %HOSTNAME% — LTP host name;
  • %MNGIP% — management interface IP address;
  • %PON-PORT% — pon port ID;
  • %ONTID% — ONT administrator ID;
  • %PONSERIAL% — ONT serial number;
  • %GEMID% — GEM port ID;
  • %VLAN0% — Outer VLAN ID;
  • %VLAN1% — Inner VLAN ID;
  • %MAC% — user device MAC address;
  • %OLTMAC% — OLT MAC address;
  • %DESCR% — ONT configuration description.

Any characters except '%' can be between parameter values.

Privilege group

config-pppoe

Command mode

PROFILE-PPPOE-IA

Example

LTP-16N(profile-pppoe-ia-PPPOE)# circuit-id format 'host=%HOSTNAME%,ont=%ONTID%'

description

Sets the profile description.

Syntax

description <VALUE>
no description

Parameters

<VALUE> — set of characters in the range from 1 to 127.

Privilege group

config-pppoe

Command mode

PROFILE-PPPOE-IA

Example

LTP-16N(config)(profile-pppoe-ia-PPPOE)# description PPPOE-IA for LTP-16N.

name

Setting profile name.

Profile name is a unique identifier to access a specific profile.

Syntax

name <VALUE>

Parameters

<VALUE> — string from 1 to 15 characters long.

Privilege group

config-pppoe

Command mode

PROFILE-PPPOE-IA

Example

LTP-16N(config)(profile-pppoe-ia-PPPOE)# name PPPOE-IA

ont-sn-format

Set the ONT serial number format for the current profile.

Syntax

ont-sn-format <VALUE>
no ont-sn-format

Parameters

<VALUE> — ONT serial number format. May take values: 

  • literal;
  • numerical;
  • section-numerical.

Default value

literal

Privilege group

config-pppoe

Command mode

PROFILE-PPPOE-IA

Example

LTP-16N(config)(profile-pppoe-ia-PPPOE)# ont-sn-format numerical

remote-id format

Sets remote-id format for the current profile.

Syntax

remote-id format <VALUE>
no remote-id format

Parameters

<VALUE> — format parameter. String 240 characters long max. May take values:

  • %HOSTNAME% — LTP host name;
  • %MNGIP% — management interface IP address;
  • %PON-PORT% — pon port ID;
  • %ONTID% — ONT administrator ID;
  • %PONSERIAL% — ONT serial number;
  • %GEMID% — GEM port ID;
  • %VLAN0% — Outer VLAN ID;
  • %VLAN1% — Inner VLAN ID;
  • %MAC% — user device MAC address;
  • %OLTMAC% — OLT MAC address;
  • %DESCR% — ONT configuration description.

Any characters except '%' can be between parameter values.

Privilege group

config-pppoe

Command mode

PROFILE-PPPOE-IA

Example

LTP-16N(config)(profile-pppoe-ia-PPPOE)# remote-id format 'host=%HOSTNAME%,ont=%ONTID%'

vendor-id

This command sets the vendor ID for the current profile.

Syntax

vendor-id <VALUE>
no vendor-id

Parameters

<VALUE> — vendor ID. A 3-byte number from 0x000000 to 0xffffff.

Privilege group

config-pppoe

Command mode

PROFILE-PPPOE-IA

Example

LTP-16N(config)(profile-pppoe-ia-PPPOE)# vendor-id 0x000fff

  • Нет меток