send omci reboot interface ont
Reboots ONT.
Syntax
send omci reboot interface ont <PORT-ID>[/ONT-ID]
Parameters
- <PORT-ID> — pon port index in the range [1-16]. The parameter can be set by a range or enumeration (for example: interface ont 1-3 or interface ont 1,3,5,7);
- [ONT-ID] — ONT index in the range [1-128]. The parameter can be set by a range or enumeration (for example: interface ont 1/5-7 or interface ont 1-7/1,3,5,7).
Privilege group
commands-interface-ont
Command mode
ROOT
Example
LTP-16N# send omci reboot interface ont 1/1-5
send omci default interface ont
Resets ONT to default settings.
Syntax
send omci default interface ont <PORT-ID>[/ONT-ID]
Parameters
- <PORT-ID> — pon port index in the range [1-16]. The parameter can be set by a range or enumeration (for example: interface ont 1-3 ot interface ont 1,3,5,7);
- [ONT-ID] — ONT index in the range [1-128]. The parameter can be set by a range or enumeration (for example: interface ont 1/5-7 or interface ont 1-7/1,3,5,7).
Privilege group
commands-interface-ont
Command mode
ROOT
Example
LTP-16N# send omci default interface ont 1/1-5
send ploam disable ont id
Sends a command to a specific (range) ONT to disable ONT laser.
Syntax
send ploam disable ont id <PORT-ID>[/ONT-ID]
Parameters
- <PORT-ID> — pon port index in the range [1-16]. The parameter can be set by a range or enumeration (for example: interface ont 1-3 ot interface ont 1,3,5,7);
- [ONT-ID] — ONT index in the range [1-128]. The parameter can be set by a range or enumeration (for example: interface ont 1/5-7 or interface ont 1-7/1,3,5,7).
Privilege group
commands-interface-ont
Command mode
ROOT
Example
LTP-16N# send ploam disable ont id 1/1
send ploam disable ont serial-number
Sends a command via pon-serial to disable ONT laser.
Syntax
send ploam disable ont serial-number <PON-SERIAL>
Parameters
<PON-SERIAL> — ONT pon-serial in the AAAAXXXXXXXX format, where A are capital letters, X is a hex character 0-F. Or in the XXXXXXXXXXXXXXXX format, where X is a hex character 0-F.
Privilege group
commands-interface-ont
Command mode
ROOT
Example
LTP-16N# send ploam disable ont serial-number ELTX00000001
send ploam disable-all pon-port
Sends a command to disable ONT laser to pon-port.
Syntax
send ploam disable-all pon-port <PORT-ID>
Parameters
<PORT-ID> — pon port index in a range [1-16].
Privilege group
commands-interface-ont
Command mode
ROOT
Example
LTP-16N# send ploam disable-all pon-port 4
send ploam enable ont id
Sends a command to enable ONT laser to a specific (range) ONT.
Syntax
send ploam enable ont id <PORT-ID>[/ONT-ID]
Parameters
- <PORT-ID> — pon port index in the range [1-16]. The parameter can be set by a range or enumeration (for example: interface ont 1-3 ot interface ont 1,3,5,7);
- [ONT-ID] — ONT index in the range [1-128]. The parameter can be set by a range or enumeration (for example: interface ont 1/5-7 or interface ont 1-7/1,3,5,7).
Privilege group
commands-interface-ont
Command mode
ROOT
Example
LTP-16N# send ploam enable ont id 1/1
send ploam enable ont serial-number
Sends a command via pon-serial to enable ONT laser.
Syntax
send ploam enable ont serial-number <PON-SERIAL>
Parameters
<PON-SERIAL> — pon-serial ONT in the AAAAXXXXXXXX format, where A are capital letters, X is a hex character 0-F. Or in the XXXXXXXXXXXXXXXX format, where X is a hex character 0-F.
Privilege group
commands-interface-ont
Command mode
ROOT
Example
LTP-16N# send ploam enable ont serial-number ELTX00000001
send ploam enable-all pon-port
Sends a command to enable ONT laser on pon-port.
Syntax
send ploam enable-all pon-port <PORT-ID>
Parameters
<PORT-ID> — pon port index in the range [1-16].
Privilege group
commands-interface-ont
Command mode
ROOT
Example
LTP-16N# send ploam enable-all pon-port 4